Hi,

I just joined Weavolution and am looking forward to stopping by often!

I have a used Glimakra loom; when I bought it I removed the ties on the sectional beam and replaced them with Texsolve... the smaller type.  I now realize my error; my weaving often involves a highly-tensioned warp and I'm lucky I haven't had a disaster.  I replaced the Texsolve with some twine from the hardware store but feel that it's too bulky and not flexible enough. 

In her Fast Warping booklet, I noticed that Daryl Lancaster has what looks like twill tape on one of her looms.  Does anyone else use twill tape?  If so, is it a special strong tape or is just the type you buy in a package at a fabric store?  Any other suggestions?  Thanks!

Diane

Comments

villageweaver (not verified)

I took a class from Darryl and after her suggestion, i replaced my section cords with twill tape and love it. They lie flat and are easy to use. A friend once saw a picture and said "what's all the spaghetti doing on the beam?!"  i use it on my avl and glimakras... I just found a confirmation order from who I purchased:  twilltape.com. I ordered 3 rolls of Lightweight 3/8" white tape. have used it since march 08 with great results.

Joanne Hall

Hi, 

A Glimakra sectional beam comes with three small trapezoid shaped boards, each having a cutout for the tie-on bar.  When placed between two of the sectional boards, you simply tie the warp ends onto the tie-on bar.  There is no need for cords or tape which builds up on the beam and can cause bumps.  When you come to the end of the warp and want to weave the last two feet of the warp, you simply attach the ordinary beam cords which come with the loom, remove the three little boards holding the tie-on bar and weave the last two feet of the warp.  You can weave right up to the end, with only about 10 inches of loom waste.  This is far easier than putting cords or tape on each section you are using.

Joanne 

Diane Roeder (not verified)

Joanne,

That sounds wonderful.  I think my sectional beam was an add-on, though, that wasn't made by Glimakra.  I'll have to think about what you wrote and see if that idea would work with what I have.  Thank you.

Diane

Diane Roeder (not verified)

Thank you for that suggestion and the link.  Do you then use a snitch knot to attach the bouts?

Diane

villageweaver (not verified)

Yep, that's what i use - some people call the same knot, a larks head knot. I had to google snitch to match sure it was the same thing. Now i know!

kerstinfroberg

Having nothing better to do, I googled both. I found the results funny: for snitch knot I got all (well, first 40 or so) results from weaving sites; for lark's head most results were from jewellery making sites, plus a few from sports sites.

TinaHilton (not verified)

Thanks for this suggestion.  I haven't been happy with cords on the sectional warp beam of my AVL, so I bought the twill tape from this company.  Way less expensive than buying the small packages from JoAnns.  I'll give it a try on the next warp, which I hope will go on next week.

Daryl (not verified)

I have Tools of the Trade looms with sectional back beams, and they came with no cords.  I chose a twill tape, twenty some years ago, because it was the flattest sturdiest tape I knew, (I'm a garment designer), and it has worked for me on all of my looms, for more than 20 years.  I'm finally starting to replace some of the cords, and the packages of twill from Joann's work fine, but I bought a large spool from Atlanta thread.  I use the 1/4", and it has worked well for me.

 

tien (not verified)

I'm having trouble visualizing how one attaches the knot to the twill tape, and attaches the twill tape to the back beam, so that everything stays flat - can someone post a photo?

Tien

Aunt Janet (not verified)

 I've been saving the twill tape that is wrapped around dish cloths that I use.  I knew that tape was going to be useful.  I am disdainful of plastic wrappings, so the twill tape was very attractive to me.  Thanks for the tip.

TinaHilton (not verified)

I was going to use it the same way as my cords:  make a loop and fasten to the warp beam.  Please let us know if it's something different.  I was planning on winding a new warp tomorrow and want to use the twill tape the best way possible to keep them flat.

villageweaver (not verified)

this is how i did it.

sites/default/files/u1/twilltape2.jpg


 

 

TinaHilton (not verified)

And then just use a larks head around the knot of the section of warp you're winding on, right?  That's how I planned to do it.  And I need to get upstairs and start on that now!

villageweaver (not verified)

yep. that's it.

TinaHilton (not verified)

My twill tape is on and I have a few sections wound.  It's working much nicer than my old cords.  Thanks for mentioning it!

Submitted by Anonymous (not verified) on