I acquired an Allen Folding Loom (counterbalance) and have no information on it. I have never used a counterbalance loom and it appears to need a tune-up. Does anyone have literature on this loom? Or a place for me to start getting it in weaving order? Everything is there but it doesn't appear to be "balanced"!

Comments

celtinbirks

Hi I had an Allen loom that I purchased used for $30 a couple of years ago and hubby and I repaired it and sold it for around $200 last year. I live in Oregon not too far from where these were made. As far as my research goes, there isn't much literature or info out there on these looms. Mr. Arthur Allen made them in the 50's - 60's? They were all the same folding CB design in several different weaving widths and wood types. They have a friction brake and a direct tie-up from treadles to shafts. They have no lams that go from the treadles to the shafts. They are light-medium duty looms. Below are a couple of articles that might be helpful on how to set one up. It would be ideal to get an experienced weaver to come help you with it. Do you live near any weaving guilds? If so, contact them and see if anyone can come help you. Also, maybe put up a post here or on Ravelry's Warped Weaver forum asking if a local weaver could come help you. I purchased some "Texsolv" cord to tie up the treadles to the shafts. I used cheap nylon cord from the hardware store to tie up the rollers and the shafts. Repairing the friction brake was difficult. If you live near Portland, OR, there is a weaving studio there called "Ruthie's" that have several working Allen looms there. The lovely people there would be happy to help you with yours.

Good luck

Candace

http://www.allfiberarts.com/library/aa00/aa101800.htm

http://www.ehow.com/how_10022525_tie-up-counterbalance-loom.html

Submitted by Anonymous (not verified) on