mandolinchick (not verified)

how cool is that! Keep us posted..............

Cheekyredhead (not verified)

Pictures!  We want to see pictures!

Cheekyredhead (not verified)

I'm a bit daring and like to figure things out for myself so I would try a small test warp using string heddles the way they are done on a standard inkle loom.  If that doesn't work out then I'd try going back to the manufacturer if you can to get a clairification on the instructions.

Margriet Carrico (not verified)

Thanks for your suggestions.  I was able to figure it out and it does work like in ikle loom the heddles are doubled from the bottem.  The instructions that came with the loom were very lenthy but very short on clarity.  The only difference from an ikle loom is that you can put a very long warp on and you are not restricted to what ever length the inkle loom is.  I can now bring it to our State Fair so the kids can work on it  while others demonstrate weaving, spinning etc.  We hope to recruit some new weavers and spinners.

Susan Harvey (not verified)

Woolhouse Tools has a tie up assist for rear mounted treadles... and I have one on my Gertrude loom. They call it a 20+

The original design goes back to Peter Collingwood.....

There is a link on the side bar on my blog to reach the post where I discuss it and there are images.

 

Susan

http://weeverwoman.blogspot.com

Little Meadows (not verified)

Hi Susan,   Just read thru your entry about your commercial tie up system and have 3 questions:

1.  How do the eye screws/bolts attach to the treadles?  I have a Glimakra and the treadles have holes drilled thru right alongthe centerline, so am wondering how I would set  up 2 rows of eyes without loosing integrity of the wood. New treadles?

2. All that tex solv looks expensive ... what do you think would be the effect of using say drapery cord until just before the board and then tying on  to the tex solv  in order to have the benefit of the slots?  Maybe eliminate the tex solv all together and just use stopper knots?

3. You mention changing the tie up in with a warp on is difficult but I do that all the time so as a newish, self taught person wondering what I'm missing?  With the Glimakra I just put the pins into the jack up at the top, have I been risking something?  You can imagine I'm wondering now what will befall me the next time....

 

A general comment to the thread is that Bev very kindly emailed me a PDF of her  system so I really appreciate everyone sharing so we can compare.  Thanks Bev and Susan!

Liese

conib (not verified)

 

*Thank you so much*  for posting your photos of the 20+!

Your photos gave me "thoughts" about how to implement a rear tie-up on my Ideal and Standard ... e.g. I'm thinking about little pulleys ...

(Of course my "thoughts" w.r.t. parts cost might end up being about the same money as purchasing an actual working model from Woolhouse.)
;-)

Is there any chance I could see a photo or drawing of how your Gertrude's parallel countermarche works?  It clearly works differently than the Spring ...

-- Constance

Susan Harvey (not verified)

Hi Liese,

We took the centre rings off the treadles and then used a wood filler to fill and then sanded the holes. Then my husband carefull drilled two rows of holes and then we screwed in a double row of eye rings

There have been home made models made using what ever NON stretch cord they could find and then texsolv for the back peg board. You have to have a system that  will allow joining of texsolv to the cheaper cord which is differerent in most cases. I have not seen these 'joins' in person and so can't speak to the methods used.   Most build the box and peg board and side supports and then buy the cord and and clips. You can buy the eye rings at most hardware stores.

If you have been changing tie ups mid warp, then disregard my comment!!  Carry on and be happy....

 

:) Susan

PS The cords are subject to a fair amount of wear and abrasion as they go backwards and forwards in the rings. I'm keeping addtional texsolv on hand for the inevitable repairs. Can't be helped! Moving parts etc

 

Susan Harvey (not verified)

Hi Constance,

Yes, the two looms are different systems.Both are amazing!

There may be a description at Woolhousetools.com about the system as I'm not sure how to load a hand drawing.

Maybe try googling Parallel countermarche and see what comes up!  Failing that I can send you a photocopy if you send me your address.  Just let me know...

 

Susan