jenadina (not verified)

Yeah, the Kromski is nice where space is concerned what with the folding and the warping board.

Do you have the regular Ashford or the Knitter's Loom?

Personally, I'd love to have any of the above, but especially the Kromski.

jenadina (not verified)

Yeah, the Kromski is nice where space is concerned what with the folding and the warping board.

Do you have the regular Ashford or the Knitter's Loom?

Personally, I'd love to have any of the above, but especially the Kromski.

DJCNOR (not verified)

 

 I have a Kromski harp loom, too. I bought it specifically because of its warping board capability, but also because I teach individual weaving students, and it makes a very good starting and lending  loom with its folding capability. Since I use the warping board to wind warps for my floor loom, I wish I could wind warps longer than 4 1/2 yards, but I'm generally pretty happy with it.

Donna

DJCNOR (not verified)

 

 I have a Kromski harp loom, too. I bought it specifically because of its warping board capability, but also because I teach individual weaving students, and it makes a very good starting and lending  loom with its folding capability. Since I use the warping board to wind warps for my floor loom, I wish I could wind warps longer than 4 1/2 yards, but I'm generally pretty happy with it.

Donna

sandeleh (not verified)

I have the Ashford RH with stand, and while the stand is easy enough to disassembe, it's not really colapsable unless you take the side pieces apart.  The legs are sort of U-shaped and make up front and back leg for each side and then there are cross pieces that keep the stand and loom stable while you weave.   The cross piece on the back of the legs attaches with bolts and knobs, so it is easy to tighten when it gets loose.  The loom fits into slots on the legs and has the same bolt and handle that can be tightened when loose or loosened to take the loom off the legs.

here is the stand without the loom

the knobs are kinda hard to see on the above photo, but are the black blobs at the tops of the legs.  The piece of wood across the bottom of the stand (on the floor) just lays there and I have broken one end off by stepping on it.  Oops...  Anway, if I still had that piece I think my loom and stand would not be as wobbly as they are.  When I'm weaving, I tend to put a foot on each bottom piece of the legs and to tighten up the knobs if I feel the loom wobble when I beat.

BTW - after having the loom for some years now, I've done away with the Ashford "warp sticks" and tie the apron rods directly to the warp and cloth beams.  Easier and only 1 set of ties to worry about being the same length.

Sande

sandeleh (not verified)

I have the Ashford RH with stand, and while the stand is easy enough to disassembe, it's not really colapsable unless you take the side pieces apart.  The legs are sort of U-shaped and make up front and back leg for each side and then there are cross pieces that keep the stand and loom stable while you weave.   The cross piece on the back of the legs attaches with bolts and knobs, so it is easy to tighten when it gets loose.  The loom fits into slots on the legs and has the same bolt and handle that can be tightened when loose or loosened to take the loom off the legs.

here is the stand without the loom

the knobs are kinda hard to see on the above photo, but are the black blobs at the tops of the legs.  The piece of wood across the bottom of the stand (on the floor) just lays there and I have broken one end off by stepping on it.  Oops...  Anway, if I still had that piece I think my loom and stand would not be as wobbly as they are.  When I'm weaving, I tend to put a foot on each bottom piece of the legs and to tighten up the knobs if I feel the loom wobble when I beat.

BTW - after having the loom for some years now, I've done away with the Ashford "warp sticks" and tie the apron rods directly to the warp and cloth beams.  Easier and only 1 set of ties to worry about being the same length.

Sande

knitsalot (not verified)

I busted one of the cords on my first project, I am hoping that the length won't change much if I melt another join into it.   If it does, I may replace the cord loops with something like cable ties, which my husband buys in bulk.....

 

Also, I started a separate Weavolution group for Kromski Rigid Heddle looms, if anyone else wants to join. I somehow missed this group in the first search I did, but I'm glad I found it as it seems to be very active and helpful to beginners like me.

 

Joanne

knitsalot (not verified)

I busted one of the cords on my first project, I am hoping that the length won't change much if I melt another join into it.   If it does, I may replace the cord loops with something like cable ties, which my husband buys in bulk.....

 

Also, I started a separate Weavolution group for Kromski Rigid Heddle looms, if anyone else wants to join. I somehow missed this group in the first search I did, but I'm glad I found it as it seems to be very active and helpful to beginners like me.

 

Joanne