I picked up my Varpapuu loom today!   YA!    This piece came with it, but the lady I bought it from didn't know what it was either.   It looks like it might be some sort of skein winder, but the way the wood pieces are on it, the yarn wouldn't slide off well.   And, that middle piece looks like it's supposed to go somewhere on the loom and rotate, but where?

 

Comments

r1mein54 (not verified)

Since I do not know - and just by guessing by the mechanical appearance,,,it may be that this frame sits in some type of two legged cradle or across two beams where the metal rod would be horizontal. With the rod being below the wood parts that would make it a balance or teetertotter and I have no guess where that could be used on any loom. Now lets hear from someone who DOES know.

Joanne Hall

the loom, it might not be something for the loom.  The loom may have been packed up at some point by someone who was not a weaver.

Joanne

marlenedg (not verified)

 Well I don't know either but I know what I would use it for. I have an old loom here as a loaner and it came in pieces. There is no way to hang tredles and I would use it to lay the base end of the borad I made for a tredle. The one tredle that did come with the loom has a pipe in one side of it and looks like it would go on the center part of yours.

 Just an idea. I'll sure be glad when someone does tell us what it is too.

Marlene

 

SallyE (not verified)

. .  Some of it matches that on the loom but some doesn't.   Maybe when I get the loom put back together Something will occur to me.

 

 

 

 

 

SallyE (not verified)

It occured to me today that this thing looks a little bit familiar.   There is a part very much like this that used to be used in old steamer trunks.   It was to hold the hanging clothes in the trunk as you closed it.   I have an old trunk that actually still has the part.   It's a bit different, but similar to this.

Is this what it could be?

 

terry.hp

It may be a simple frame loom that you warp by starting at the bar and then going around the wood frame and back to the bar. You reverse direction each time you reach the bar. Of course that would only allow you to weave on the side without the bar. The other option would be to warp around a dowel and use the fixed bar for string loop heddles for one shed and a shed stick for the other. Just guesses, but I've used similar items.

Sara von Tresckow

This thing is not sturdy enough to be any sort of ta pestry frame.

I've used looms similar to Varpa models for 30 years now, and this piece is pretty surely one of those unidentified "extras" that come with used looms.

debmcclintock

Is it the right size to be a heddle jig? Can't tell if it breaks down to take tension off.

SallyE (not verified)

unless there are such things ad 19.5 inch heddles!   And sliding them off would be very difficult since it doesn't break apart in any way.   But that was an excellent guess since I didn't post the size of it!

 

Penn (not verified)

How big is it, and how long is the metal bar? Is the other side of the frame completely plain? Are two of the projecting ends longer than the other two? Does the bar rotate easily within the brackets, or does it seem fixed? Is there any evidence of handling or other use, like punctures, rubs, etc?

SallyE (not verified)

How big is it,- wood part is 21" x 17"

and how long is the metal bar?-   20.5"

Is the other side of the frame completely plain?  - yes, just like the side shown in the picture

Are two of the projecting ends longer than the other two?- yes, the ends perpendicular to the metal bars are a little longer - about 0.75" longer at each end.

Does the bar rotate easily within the brackets, or does it seem fixed?- it's fixed, no rotation at all.   Also, it's put together with large rivets, not screws.

Is there any evidence of handling or other use, like punctures, rubs, etc?  - no, none that I can see.

 

Weavin Steven

Coincidence? Just today I picked up a Varpapuu 8-shaft table loom, and it too came with an odd thing-a-ma-bob. The wooden frame part measures approx. 32 in. square, and unlike your metal rod, mine has a metal winding attachment sticking out one side. (In my photo, the left side of the wooden frame is broken.) I've no idea what to make of this. Some sort of bobbin winder? A milkshake device for thirsty weavers? Maybe my winder thingy turns your rod thingy?

SallyE (not verified)

And you got this with a TABLE loom!   My Varpapuu is a CM floor loom.   It really looks similar to my piece, buy yours is more "advanced."   What happens when you turn that little handle?

I do love a mystery!

 

Weavin Steven

Nothing happens when I turn the handle. It appears that perhaps one could somehow attach a bobbin, but the screw that sticks out doesn't really look like it could hold onto a bobbin. I think I'll hang onto the whole contraption for a week or two if someone is able to identify what it is, but then junk it if it remains a mystery.

Could your piece be an elaborate skein-dying mechanism? Maybe hang a skein(s) from the metal rod, then the whole device is lowered into dye? Or maybe it was a skein drying rack? 

r1mein54 (not verified)

Could you post a photo of the underside of the frame showing the middle board with the hole in the center and possibly show any mechanism from the crank stuff?

debmcclintock

Ok, when I sell my rug loom I'm gonna put together a gizmo that creates half this much thinking fun. Shhhhhhhh

SallyE (not verified)

It used to be such a problem finding a Christmas present for my Father, so I finally resorted to getting him a "whatsit" - some unknown little tool, etc.   He had great fun taking it around to his old buddies, all of them guessing what it was.   One year it was a grapefruit corer (I have no idea about the reason behind that one), one year a maple tree tap.  I guess if Dan were still around this thing might be a good candidate for a gift!

 

Weavin Steven

r1mein54, there's nothing underneath. It basically resembles a pallet.

r1mein54 (not verified)

I think I am starting to envision a large yarn swift stuck in the hole of the center board with this sitting on a table,,,naw - couldn`t be that simple - could it?

EvaHall

Could it be something to hold a cardboard poster at a selling booth at a fair?

Aunt Janet (not verified)

It needs a stand for the axle.  You wrap yarn along the whole thing, then crochet, or rows of twining or sumac across in one or more places, cut, and Viola! Fringe! 

Just another guess, but I'll bet it would work.

SallyE (not verified)

The problem with using it as a fringe frame is that the metal rod is exactlty in the middle.  So if you wrapped yarn around it, you would get fringe with long and short ends since you couldn't crochet, etc., in the very middle.

And since it has a sort of knob on each end and little pieces of wood sticking out, anything you wrapped around it won't slide off unless you cut it - which leaves out the skein winding options.

 

Submitted by Anonymous (not verified) on