Very good point, Sally! "What kind of beaters do these table looms have? Anchored at the bottom, or swinging from the top? Do you have a preference for a table loom? If so, why?" I think the above question is one of three things I think about when looking at the different types of table looms. Another question I think about too is does it fold for transporting? And, what is the depth or space between front and back beams? Is it a comfortable space for warping and working?

Sometimes the best way to research something is to pose a question and have those, who have already "been there, done that", weigh in and give their opinions.  I am a relatively new weaver - since 2012 - and have a floor loom.  I would like to get a table loom to take with me to guild meetings and workshops.  I am looking for your input as to the different types of table looms that are out there.  One question I have in particular is "Should I choose a table loom with swinging beater or without?"  I am leaning toward a 8 to 12 shaft; but probably just 8.  I haven't found what I am looking for yet so your opinion will be very helpful to me.  Feel free to private message me if you know of something I might be interested in.  I live in northeast Pennsylvania.  I will be in eastern Iowa in a few weeks for a visit.  :)  Thanks in advance.

Comments

loomyladi (not verified)

I prefer floor to table top, but I have used a variety a table tops.  Mostly four shaft.  I will admit I'm a little prejudiced, but if you can locate a Purrington (www.purringtonlooms.com) you will be glad you did.  I was able to borrow a 4H, 15" Purrington and realized that it was light and user friendly, with a unique lever release.  I then had the opportunity to acquire an 8H, 14".   It's compact and travels well, finding them used can be difficult and if you want to order one expect a 12 month lead time.  Goodluck on your search.

lindayork

I have a Schacht table loom.  Years ago, I had a J-made table loom that had levers on the side.  What I like about the Schacht is the levers for lifting the harnesses are front and center.  That way I can switch hands for lifting easily.  Makes sense to me to have the levers in the front center whatever table loom you buy.

sally orgren

for those who have responded so far...

RE: the looms mentioned, are the beaters anchored at the bottom, or swinging from the top?

Do you have a preference for this action on a table loom? If so, why?

lindayork

The beater is anchored at the bottom on my Schacht.  I met a woman in San Diego who had changed her Schacht beater to slide on drawer sliders on either side.  It did give her more room on the weaving side.  She said she did mostly small tapestries on it.

weaver-dyer (not verified)

I learned to weave on a LeClerc Dorothy table loom as it was just about the only folding table loom at the time.  There are now quite a few table looms on the market that are (in my opinion) much pleasanter to use.  I recently purchased an 8-shaft, 15.5" weaving width Louet Jane.  It has a beater that swings from the top. The levers on the front of the castle are easy to use. The loom folds up compactly with the warp on it, and is very easy to carry. The 15.5" model comes with a leather carrying handle.  Would I recommend it, yes! If you do acquire one, be sure to order extra heddles.

Janet  

 

ruthannie2

I like Ashford's 4 shaft table loom. I've used a lot of different makers and this is the one I bought. It folds with the warp or weaving on for transport. I think people put the 16" in a rolling carry on suitcase. It has a hanging beater which is designed to beat evenly and allows a longer or deeper weaving amount before advancing the warp. There's a stand and a treadle kit too, but I use it on a small folding table. It has some similarities to the Louet, which I also like. I also have a Leclerc Artisat 4 shaft and an antique walnut 4 shaft barn loom, amid miscellaneous rigid heddles, frames, tapestries, etc.

mleshleman (not verified)

What size Ashford do you have? When it is folded, what are the measurements. I've looked on Ashfords site but all I can find is weaving width. If anyone else has any of the other sizes for Ashford, would appreciate knowing the 16" folded size. Thank you.

Peg R

Aftr all these years, I just bought a Leclerc Voyager 15 3/4" 8 shaft table loom for sampling! I decided that my floor loom uses too much yarn (think money) for samples. It came today and I just finished putting on the heddles. At first glance, it looks to be a well-thought-out loom. I got the swinging beater, which will be a whole new idea for me. Does anyone have this loom/beater and do you have any suggestions for use ? I will probably wait a week to use it, as I head to AZ for a navajo weaving workshop on Tuesday(Yay!).

pammersw

I learned on a voyager 4 shaft. Fasten it securely to the table and it's a great little loom.

sally orgren

I have two, a 12 shaft and an 8 shaft, and I use my table loom(s) for any task that I don't want a lot of loom waste, which means a lot of sampling and sometimes real projects, too.

Also, I agree about securing a(any) table loom to the table surface. I sometimes use quick release clamps, but recently discovered the rubberized mats sold as drawer lines work just as well to keep the loom from sliding on the table surface. 

silkworker (not verified)

This thread has come at a very good time. Major change in lifestyle has caused me to re-examine my weaving. I've decided to retire my Mighty Wolf and look at buying the Ashford 32" 8shaft. I'd love to hear from anyone with experience on this loom. I've never used a beater like this before. My current table loom is a 25" 8s Dundas/Montana loom and sweet as it is I'll have to sell it because I want the wider width. However, I'm not exactly being pushed into the Ashford and would like input before I leap. As to question re dimensions - Ashford is very stingy with their information. Even their assembly pages don't give the actual size of the looms. I've e-mailed them and if I get helpful information, I'll post it here.

TinaHilton (not verified)

I have the 16" Ashford 4 shaft loom.  Previously I owned the 8 shaft.  They're very nice.  The 4 shaft loom fits under the bed in my RV so I can take it with me when I travel.  I happen to be sitting next to it right now (it's currently folded and waiting for a new warp).  I'ts 7" tall x 22" wide x 29" long.  I had to write to Ashford to get the dimensions.  The 8 shaft loom was 2" too tall to fit in the RV.

Submitted by Anonymous (not verified) on