Hi there !  My name is Janie50... Just turned 50 last week... (grin).  So here it is... My first BIIIIIIIIIIG project.  My parents wove for years !  They had 4 different floor looms, of which I am now the Happy owner of one, ( 32" jack floor loom). Now... Being that my mother is old enough to start losing some of her memories, I turn to you all for help, encouragement and yes... More enthusiasum ! lol... 

Here is the gist.  I want to make an 11' x 9' quilt, for my queen sized bed.  I am not quite sure of what kind of thread kind my warp is, but the color is a lovely crimsen ! The weft is going to be strips of old sheets I have gathered for years.. ( We all do it, but for those who are minimalists... Bully for you !) The strips are 3/4 to 1 in in width, and different colors.  I know the length/width of each of the 16 pieces will be 18" x 12".

 

Sorry no real pictures of the loom, no do I know the manufacturer either... This is a fold up loom, with 4 treadles and 4 of the lift thingies... ( sorry, reaaaaal new to all this.. terms are kinda being muddled in my head at this point... Bear with me, please.)

I am not quite sure how to figure out what it is I need to do, to make the length for the warp.  I would like to get at least 4 panels from each warping... That way I only have to rewarp 4 times... This is really very confusing... I have some small proficincy with a table loom... Folding.  I have made several wall hangings, to decorate my empty spaces, and as gifts for family.  I really am a bit overwealmed... so... Help ? 

Thanks so much !  

Janie50.

Comments

mrdubyah (not verified)

Janie,

     Something is definitely missing here.  An 11' x 9' coverlet would require 99 sq. ft. of material.  Your proposed 16 18"x12" pieces only add up to 24 sq. ft.of material.  Why wouldn't you just weave four strips 11' long and 27" wide, varying the weft colors as you weave? (note that you will get some draw-in during weaving and some shrinkage in washing, so you might want to set up the warp for 30" wide and weave slightly more than 11' long.)

     You could accomplish this by putting on one 16 yard warp 30" wide.  That would equate to four 12' long strips or, if your loom won't hold that much warp, do it in two 8 yard warps.  BTW, for future reference, the "lift thingies" are called "frames".  This is an ambitious project for a beginner but definitely do-able.  You go girl!

janie50

Lol! Thank you !  I thought this would rather ambitious... But I am soooooooo committed !  Okay, so how do I get that 16 yards/8 yards figured onto my winding board.  I'm not sure how to or where to do the crossovers, or how many in order to get a smooth removal of my weft material... 

Thanks for the correction on the "thingies"! Frames it is !  

Now, I just measured my reed, and it is just a tad over 2' long... I don't think the 30" wide will work here... Suggestions ?

Sara von Tresckow

Perhaps you should get a basic weaving book from the library, your parents or a book store and begin there.

To prepare a loom warp and perform the basic steps would be covered in Joanne Hall's "Warping the Loom". 

You'll need to think about how many warp threads per inch you want to have, how to weave with rags, dimensional losses (shrinkage and takeup) so you don't run short, etc. A basic book will also give you the terms you need to communicate your wishes clearly. It won't take forever, but a little prep would help this project proceed.

janie50

I do have several books on how to warp.. but I can't see well enough to see exactly how to do it. I've also checked out several books from my local library.  I did figure out that I want 12 epi. Using 12 dents, one empty, than 12 again.

Del (not verified)

I, too, applaud your ambition. But I strongly suggest you try to find a tutor who will come to your house and help you or that you go to your nearest weaving supply store/craft centre/etc.-- if one is near. Or get in touch with your nearest weaving guild and ask for a helper.

Your project sounds wonderful but you really are starting from scratch and it would be a shame to to spend hours of time and to use up all your materials and find yourself in a terrible mess.

You have a 32" loom but only a 24" reed--- it is worth getting a full width reed, even if you have to borrow one. ( That guild...)

12 epi in a 12 dent reed is one thread per dent. Why are you leaving an empty dent after the 12 ends?

With thinner and thicker rags you can make some lovely plain weave and twill variations, But you need to try this out a bit. How about a small runner, same warp, same sett (ends per inch), same rags. This will give you a chance to try the entire procedure from start to finish, on a managable scale.

It is MUCH easier to wind a long warp on a warping mill-- back to the guild or a craft centre for help finding someone who may have one.

Don't be discouraged. But for many summers I taught kids how to swim. I love enthusiasm but I'd never throw one in the deep end just because she wanted to jump.

 

ReedGuy

Ma'am, you really should learn a bit before taking on such a huge project. It's unfortunate that your mom is not able to help or that you never took an interest early in life. Things we sometimes regret later I guess. As far as seeing how to do things from a book, maybe the instructions of these books don't have good illustrations. Personally, illustrations are far better than pictures. With pictures, one gets tied up with the loom pictured and yours may be a different one in many aspects. An illustration concentrates on the process and eliminates the 'background noise' of a specific loom being shown in a photo. It's one thing to have the manual to your loom, and quite another thing to have an instructional guide book. One book has already been mentioned here, authored by Joanne Hall, another is the 'Big Book of Weaving' which is full of illustrations and projects. It's by Swedish authors, so measurements are metric. Also, the book is written about counter (balance, march) looms so the tie up is just the opposite of a jack. You might find the Leclerc book on their website useful, 'Warp and Weave'. It's in PDF format. And it's free.

Good luck

Erica

Janie,

I know finding a tutor might be difficult. I would suggest<a href="http://weavolution.com/classes">Daryl Lancaster's Warping Front to Back</a> here on Weavolution. I am also happy to set up private tuition usinb our online video system.

Let us know how it goes!

Cheers,

Erica

janie50

Thank you all for your suggestions and help ! I did stumble onto a local guild member, and she put me in touch with a lovely lady that has helped me get my loom all warped up !  I am now at the point where I am working on the tension on the warp so it is all even...I've gone back and forth from the middle out on both sides, and still can't seem to get this right... That's okay, as has been pointed out.. I am just starting.. And I am confident that I will get this down right (smile). So there is the update on this first project !

sugarcat

Hi, Janie!  As a new weaver who started over age 50, congrats! wishing you success!

janie50

Thank you !  Watched my parents all through childhood, and young adulthood but never caught the fever as it were, until a couple of years back. Mom gifted me with a jack loom last year, and it's taken me this long to get to this point !  I think with this project, it will prove I am a weaver at least on a floor loom. I also have several projects competed on a table loom, and an on going project with an inkle loom. So not a complete novice, but darned close !

janie50

Here we are, a few months later, and I am almost ready to remove the first piece to my quilt !  I took my little loom over to my "mentor" and she was so thrilled, she called her husband out to see what I had gotten done !

I have maybe 18" more til this part is finished !  *Big Grin!*  Hopefully I'll be able to get a decent picture soon, and show off my first efforts !

Submitted by janie50 on