I am finally up and weaving on my second project! It is a shadow weave gamp in 10/2 cotton. Now that I am watching the patterns emerge as I weave I realize that in at least two places I missed dents in sleying the reed. I can't add in another warp thread because it would throw the patterns off, so I will have to be content with some "lace" in the final project! I am using a 10-dent reed and was having trouble seeing whether I am skipping a dent or even threading the same one a second time. Does anyone have a trick to help them see where they are?

Comments

laurafry

Light. Lots of light. I recently bought a lamp that can be worn around the neck and directed where it is needed. I find it really helps to see while threading and sleying. Cheers Laura

msthimble

HI Ann, Try this.  After threading your heddles, remove your reed from the beater.  Place one long lease stick on each side of the warp, parallel to the warp resting one end on the front breast beam and the other on the back breast beam.  Place your reed flat, resting it horizontally on the lease sticks.  You will thread the reed by poking the reed hook up thru a dent and pulling the thread down.  It's easier to see the dents when you are looking down on them.  I hope this helps! XO Gail

 

arjill

I also sley the reed as msthimble does.  I have tendonitis in my left wrist and this method is much kinder to the wrist.

Ann A

These are all good ideas. I will try them next time. Having this forum to ask about this small glitches is awesome!

Submitted by Ann A on