Hi. I am not a weaver, but find myself in the middle of care and feeding of a beautiful old B5 loom. My wife is the weaver and I the fixer so to say. I joined this activity in hopes of getting some needed information on getting this loom back together. This may not be the place to post for this information, if not I would appreciate any suggestion as to where to look. I personally disassembled the loom down to the last and smallest part. I have refinished the wood and cleaned and repaired all other parts. I did what I thought was a good job of documenting where everything should go. I find now that I missed a critical area. Usually I have no problem figuring out how things fit and work but not on this one. I am needling more information on the way treadle assembly goes together. I missed on getting photos for some reason. I can't seem to locate this information. The wife has several looms but none near the caliber of this one, which I am growing fonder of by the day. I am learning a lot about how these things work and expect to get proficient at caring for the loom. I will be glad to share any useful information I come across. Kindly thanking in advance any response.

Comments

sequel (not verified)

Here's the Macomber web page:  Link

Here's the Weavolution Mamcomber group:  Other Link

SallyE (not verified)

I'm thinking that the best thing for you to do is to find a local Macomber and visit it.  Seeing how it works when together, and maybe taking pictures, will help you the most.   As far as I know, Macomber doesn't really post the kind of detailed assembly instructions you need if you really "disassembled the loom down to the last and smallest part" since they are sold with the mechanism already assembled.

Did you actually remove rivets??   I hope not!

Where approximately do you live?

BTW, if you boil the jacks in vinegar and salt water, they clean up to a glorious copper/gold color.  You can then spray lacquer them and they are beautiful!

 

 

Michael White

Sent you a PM with my phone number

Michael

jim cope

I got lucky. Turns out that a Macomber just moved into the area. I was able to visit and take photos. Takes away lots of questions. We will see how things look when the re assembly gets to the part where everything has to work right.. I appreciate the suggestion about vinegar and salt water. It does work well.
Submitted by jim cope on