While I can imagine that using cotton and linen for bath towel makes sense and is probably very absorbent, I know if I were to put those out as bath towels, my family would ask why are we using dish towels to dry off with! Is there a yarn I can use that will be fluffier like commercially made towels? I did a search and read through 2 hours of posts and did see where someone used a boucle as the weft which looked like it would work but I was wondering if there is something else? I am a new weaver so if there are fancy things you have to do to get that result, well, I am probably out of luck. I was thinking of trying a cotton warp with a chenille weft. Would that work? Thanks for any help you can give!!!

Comments

sequel (not verified)

Cotton and rayon are both soft and absorbent - along their length.  They are less so along the tips of the fibers, which is what you have on the surface of chenille.  In terrycloth towels the loops are lengthwise loops of cotton.  It is a supplemenetary warp technique and needs a second warp beam if you are planning to do more than one.

You could combine finer cotton yarns, like 8/2, with heavier cotton, like Sugar and Cream pattern wefts, in overshot or summer and winter. 

ReedGuy

Commercial bath towels have looped pile. When handwoven there needs to be a technique that makes looped pile by combing the weft up above the surface. Cut pile would make fuzz balls when washed a lot.

Jane Greer

thanks for the replies, sounds like it is outside of my expertise at this time....lol

 

ReedGuy

The easiet way to make looped pile is to insert a metel rod, determine how high you want it and use that diameter rod. Use a plain weave structure. Insert the rod in the shed, make a couple passes with the shuttle with a couple sheds, insert another rod, then another couple weft shots. Do this with 4 rods, before starting to remove the first rod to reuse as you progress. This makes looped warp pile. What I would do is have plain edges maybe 1/4" - 1/2" with no pile. I think it could be done with a double weave technique myself. So some rods make top pile and others made bottom pile. You'd have two layers, but bound together. A lot of work and not really rocket science once you learn some technique. I probably have not explained it all that clear. You won't want a real tight warp, but sufficent for a good shed. And you want those wefts to pack in good so the rod has to lift some, might even need more than 2 weft shots of yarn. Have to experiment. I would want to used no heavier than 16/2 cotton.

ReedGuy

The first method I method is a weft pile, like shown in the link. Unless it is double wide, then folded and sewn you only have pile on one side.

What I described in the next is a warp pile, double sided with a slack warp. But not too slack. Less time consuming and fiddling. Best way to do it is to warp thicker pile warp with a thinner ground warp, so maybe a 20/2 ground warp with a 10/2 pile warp. Decide how dense to warp it (sett) and spacing in the ground cloth. One shed opens the pile warp separate on each layer. That way the pile warp keeps from being too slack and not as tight as the ground.

Jane Greer

so instead of wrapping the weft around something as they did in the video (which was great, thank you) you would just insert a rod, throw a few picks of plain weave, insert another rod, etc. and then remove the first rod and continue? would the space left by the rod be secure? I visualize it being just a space but would you beat it down into a loop? 

pammersw

It seems to me a skinny dowel would work, too, right? And they probably cost a lot less. :)

ReedGuy

There shouldn't be any more of a gap with the warp raised up higher than the weft, than there would be as normally woven. The warp thickness doesn't change. Just needs to be packed a little tighter with firmer beat, which will come better with the second weft shot. This will lift the rod some above the ground cloth. If the pile is not secure, the tension is too tight on the pile or maybe more rods are required before starting to remove them. For instance, a warp end can be secured in regular woven cloth as long as there are enough undualtions to secure it. The ground warp must be tighter, then the pile. You will not be piling all the warp, just something like every 3rd or 4th one (the pile warp). You have to decide the spacing of the warps. Experiment/sample before commitinng to a project you've never tried. If you just pile one side, weave it double wide and fold and sew.

ReedGuy

I would try a 1/8" -3/16 rod" which is cheaper than dowel coincidentally.

sequel (not verified)

The take-up in the warp pile threads will naturally be much greater than the structural warps.  I've often wondered if you were to make the warp loops around the metal rod on alternating single shaft sheds, (shaft 1 loops, plain weave on shafts 2&4, 1&3, 2&4, 1&3, then shaft 2 loops, 4 plain weave picks, shaft 3 loops, then 4 more plain weave picks, and shaft 4 loops.  Wouldn't that balance out the take-up so you could weave terry on 4 shafts without a second back beam?

ReedGuy

Sounds like you have the idea. The pile would be on one shaft yes, separate from the ground. And if there are wrong side floats that's all that much less take up to be able to raise the pile. We're not raising the pile much. I would sample both with all the warp yarn the same and then with pile being double the ground. I think the pile will last longer if it's heavier.

Artistry

Sequel,

You're definately right less take up with the two pile shafts. with a 4 shaft loom. But it might not be enough still.I don't know the take up  of the terry cloth sample below I wove, figures doesn't it?, but a few notes that might be interesting. I will say with these chose of cottons the terry cloth seems fragile for  a towel, but it would be very interesting in contemporary clothing. So I agree with ReedGuy heavier yarns. 

the details: 3 shafts, both ground warp and pile warp 10/2 cotton. ground warp sett 24epi, pile warp sett 12 epi.  Light tension on the pile and medium tension on the ground. I used bamboo skewers as the rods. the threadling was, 1&3,2&3,3(pile insert rod) 1, 2&3 treadled in that order. The sample is a little squished it's been sitting under books, alas!

 

ReedGuy

Yes, 3 shafts is all I could come up with to. But I think you have to lower shafts 2 and 3, not just 3 or shaft 1 and 2 with rise, where as I don't want that close a warp pile. I just want 1 to rise. If you double weave it and bind the layers the floats are hidden. When you don't undulate 2 or 3 picks you will probably have sufficient wiggle room for the pile to form. Just got to work out the binding of the layers. Again don't want pile much higher than 1/8 to 3/16 high :)

Artistry

The loops measure 2/10's of an inch and with how I have it woven it seems like it would get caught on things, a towel it will never be:)

justmekaybee

A cotton chenille yarn for weft would make a nice simple towel. Or a cotton boucle. 

I think you can get either from cotton clouds.

Sara von Tresckow

FYI - looped cotton towels (frottee) were made on handlooms in the 8th century. Two warp beams are needed, the pile warp being much longer. There is a stopper on the loom that prevents the weaver from beating the weft into the fell line. After about 3 picks, the stopper is released, the next weft firmly beaten, and what was backed up on the pile warp now throws up little loops. No rods needed.

Artistry

That is really interesting. Three rows of pile or more makes so much sense for a sturdy towel. I didn't realize it was such an old weave. Sara, I would love to have a reference for weaves and their history, do you have a recommendation ? Cathie

Sara von Tresckow

I'm tired after turning in a 120 page manuscript today - those looped towel looms were on display at the German Damask Museum in Großschönau when we visited in 2009 - I took some photos of the process and loom - if I find time will post them. 

So many complex fabrics were woven prior to the Jacquard and dobby looms - using specially equipped looms modified to a special purpose.

A single book isn't out there - but look for historical or archaeological books about textiles rather than project oriented ones - most magazines are continuously reviewing interesting books. Casemate (formerly Oxbow Books) lists many really informative books covering textile history.

Artistry

Thanks Sara, will look for Casemate! Thank you very much jj50!

ReedGuy

I have the full text as PDF off the archive.org site. I think it is a two volume set. I retrieved them last winter when looking at cord, rep and pile. I also recall reading that exact method to.

However without modifications to a loom, the rod method does work, but a wooden or bamboo rod works better than a smooth steel rod. I use 1/8" hardwood dowels. I have been using my sample face cloths now for weeks. I intend to experiment/sample some more this coming winter and weave a bunch of towels and cloths. You just need to work out how dense you want the loops and how many picks to bind them good. You do end up using 2 or 3 picks between the loops, with fine yarn at least.

ReedGuy

Yes, inga. I did this video a while back. But I have refined the technique a bit since. There is still room for improvement and I intent to develop it further. I studied some commercial towels more closely and came up with another draft using 20/2 cotton.  The trouble with trying to use a spacer for the pile is you can not use plain weave for the 3 picks, it simply will not slide down the ground warps. You need a type of basket weave that will slide down the ground warps with successive picks undulating through the pile areas so it can grab them when beat in as a three thread package.

I've made these wash cloths with the different draft using 20/2 cotton.

 

 

Submitted by Jane Greer on