I should preface this by saying that I am a very new weaver.  Who has had one casual "lesson" and wove some samples on a borrowed Dorothy.  Then I bought a 4 shaft Schacht floor loom from craigslist (And got it together in a couple of days with only 3 trips to the hardware store (And I just want to say to loom sellers, don't take out screws and bolts and other associated parts, and if you do, save them all, but I'm guessing that those people are not reading weavolution so...  well, I feel better just saying it.))

Back to my question.  I was warping Dorothy with leftover Koigu for a scarf when I started looking on craigslist, and finished at about the time I made contact with the seller and the squeeing began. 

So I'm tempted to take the warp off of Dorothy and put it on the Schacht.  Comments and advice welcome.

Comments

Cara52

Hmm, I'm no expert but you risk creating a bit mess with lots of tangling.  Having said that I have done it by replacing the cross and tying through the X creeated by the cross.  Then, tie the warp in several places and remove it from the loom. 

Hope that helps   Good luck and happy weaving on your new-to-you loom.

Claudia

heatherbarrick (not verified)

i totally understand your excitement for trying out your new loom. who wouldnt want to jump right on it! i say leave current project on the dorothy. put a new "sample" warp on your new loom to play with the tension and get the feel of it while you finish the scarf on the dorothy. that way you dont loose your scarf to the tangled warp pile:)

Lauries (not verified)

I only once moved a warp from loom to loom. It was a tangled mess. I would also say finish it on the dorothy and do a new warp on the new loom.

laurafry

It sort of depends (there's that word again).  Did you complete dressing the loom or are you part way through?  What manner of warping do you do?  If you do front to back (sley reed, then thread heddles, then attach to the back beam) and you're part way through, I think you'd be better off finishing that warp on the Dorothy and, as someone suggested, put a *sample* warp on the Schacht so that you can get to know the loom (not to mention honing your loom dressing skills, and then your shuttle throwing, and learning how to treadle, etc.)

If you have the warp completely on the Dorothy and want to transfer it, put your lease sticks into the cross (lift shafts 1 and 3, instert lease stick; lower 1 & 3, raise 2 &4, insert second lease stick, securing the lease sticks and warp so they don't fall out) then unroll the warp from the Dorothy and dress the Schact.

Remember that before you can gain mastery of weaving skills you have to learn how to do the various processes.  I tell my students that they are not making cloth when they start weaving, but that they are making a weaver.

Enjoy becoming a weaver!

Laura

you might find some hints and tips on my blog http://laurasloom.blogspot.com  I also have videos on You Tube of warp winding, shuttle throwing, bobbin winding etc., etc.....

Judith (not verified)

I totally agree with you Laura. When I taught beginner weaving I used to encourage students to buy junk yarn at the thrift store and just practice winding warps and tying and handling them. I told them not to invest any significant amount of money and just use them as a learning tool and then throw them away or recycle them. The main idea is to get used to handling warps and getting comfortable with without worrying about weaving them. If you loose the cross or whatever it doesn't matter. Good warping skills need practice. You cannot weave on a poorly warped loom. Judith

toomany (not verified)

As a new weaver I did do exactly that and I didn't have any trouble.  I took a WIP off the Dorothy and put it on my Nilus floor loom.  It was an overshot project that needed a firm beat and I was frustrated with the table loom.  It just depends how confidant and comfortable you are with the warping process.  Koigu is a nice yarn to be messing with if you're unsure.  If you can keep the Dorothy for a while, you might want to leave it on and start a second project on the floor loom. Also the table loom probably has less loom waste than the floor loom, something to consider if you're finished project measurements matter.

Ellen (not verified)

While I agree with the others that you should leave the warp on the old loom, I do think that some of these suggestions about not expecting to weave something proper for a while on your new loom sounds a bit discouraging! When I was quite new to weaving I still had pleasure weaving towels in a sturdy cottolin and playing around with colours in the weft, and those old towels came out all right and are still in use and much venerated 10 years later. So good luck and have fun!

Ellen

Lauries (not verified)

The idea of using junk yarn is ok if you can do it. I want to like what I am working with. I also use stuff that I like and want to see finished. Our guild has what is called fiber source and it has donated yarn at reasonable prices. If you have a source like that it maybe a way  to get yarn you like and not spend alot of money on your yarns until you are more comfortable with what you are doing.

Submitted by Anonymous (not verified) on