When you are threading a design that requires fewer shafts than you have available, which/where would you put the idle shafts? I'm going to be use 4 of 10.  Dumb question, I'm sure, but opinions would be very welcome.  Thanks.

Comments

lkautio (not verified)

Anywhere you like.  Simplest is to use the four closest to the side you thread from.  Another solution is to spread the weave out to use all of them and treat it like a 4 shaft weave by always tieing two or more shafts together.  That gives you the option of doing more complex loom-controlled weaves on the same warp by changing the tie-up later.

Laurie Autio

kerstinfroberg

When I learned to weave (this was in Sweden, in the '8o-ies), we were always made to strip the loom down to its bare frame when "done". All shafts, lamms, treadles were to be taken off. The reason was that you never know how many shafts, lamms, treadles your next weave will require. This was of course using standard Swe looms with free-hanging shafts - .

Over the years I ignore more and more of the "rules" - but I alwaus take off un-needed shafts on my "Swe standard" CM. Being not entirely logical, on the AVL I leave them in place (unthreaded).

sally orgren

If I am using a jack loom, I would put them on the front 4 out of 10. These shafts seem to lift easier and I get a bigger shed from them. And if there is a warp break or threading error, it is easier to reach to correct.

P.S. There is never a dumb question in weaving. It's sometimes the simplest question from a weaver-newbie that can have multiple answers, and can also lead to new ideas and innovations because it makes everyone rethink their process!

Jeannie (not verified)

Thanks!  I'll probably end up trying all of them at one time or another - it sounds like they all have their advantages.

Kerstin, when I learned to fly sailplanes (gliders) in Germany, the first thing we had to do was strip the plane down to its bare frames, make any repairs, then re-cover the frames with linen and 'dope' them.  It was a wonderful way to learn all about that plane!  Tusen tack for the memory.  (We won't tell anyone how old that story makes me - those planes are now antiques.)

Submitted by Anonymous (not verified) on