I have an opportunity to buy a floor loom that has the ability to change from jack, to counterbalance, to countermarch (at a very reasonable price). It also has an overhead beater. I’ve never used a countermarch loom, but from what I read it seems to be the best choice of the three types. If it was set up as a countermarch, why would you change to counterbalance or jack? Would different weave structures work better in different modes? If space was not an issue, what type loom would you prefer? Doreen

Comments

claudia (not verified)

I have now owned all three and find the countermarch/counterbalance loom with the overhead beater to be the best choice for me.  I am long in the torso and my legs are short and I do not fit well under any of the jack looms no matter what bench I use.  I tried for years and ended up with back pain every time.

I am now the proud owner of a Glimakra Standard 120 cm wide and my weaving has become a joyful experience.  With the right tools, the DVD from Becky Ashenden, the Countermarch tie-up kit and book from Joanne Hall and an adventuresome nature, I'm all set.  I have never had any problems.  Once on the loom and adjusted properly, everything has worked perfectly from day one.  (My weavatar shows me at the loom).

I would jump all over the chance to buy this loom.  It sounds like a good deal and you will be pleased in the end.  So many choices in one loom.  Give yourself time to clean and set up and learn about your new to you loom and I believe you will be happy.  If not, you can always sell it here.  Claudia

Sara von Tresckow

Those older Thought Products looms always look interesting, but, if I understand various comments - something like a Murphy Bed.

They embody several loom types in one device, but the loom can operate only one way at a time. As with the folding bed, if you want floor space, you can't have the bed down. If you're tired, you lose the floor space.

As with any combination device, the various shedding possibilities will function physically as promised, but, for instance, the countermarche setup may look somewhat different from a standard European countermarche loom.

I'd carefully ask the present owner to see woven samples and discuss how the loom functions.

 

claudia (not verified)

And I would sit at the loom and weave for 15-20 minutes and see how it feels.

Keep us posted on your decision.  

Claudia

kellytwo (not verified)

I'm at a disadvantage because I would like to use it as a countermarch, but I never used, or even seen a countermarch loom. This is a picture of it.

I don't think this loom has the jacks above the heddles like in the pictures that I've seen of countermarch looms. Should they be? Unless the picture is in the counterbalance mode. Maybe I shouldn't consider this one. I really appreciate your advice.

debmcclintock

and secure knowledge in your loom, look around your area and see what loom the stores/studios or teachers carry.  That is where you will get your most support.  You do have to like troubleshooting if you wander away from the market norm.  Either approach is good, just understand your own personal troubleshooting skills.

Sara von Tresckow

The front hinged treadles are an issue. The Bergman countermarche is also made that way and weavers are not all that thrilled with them. Y ou need to press harder when they pivot at the front.

The company that made this loom had other models - the Barbara looms were perhaps a bit more advanced - they are no longer made and suported. If you already have weaving experience, this could be a real gem - if just starting out, look for something more traditional.

runamuckweaving

The CM system works much like a Louet loom. I put together my Barbara from pieces using the manual, which is absolutely a must with any of these looms. My loom had the rear hinged treadles and it was still quite heavy, but also a much bigger loom. Its a beautiful loom and can be quite a workhorse, but I found my TP loom rather fussy and full of, shall we say personality. If this is your first foray into a CM loom, or a floor loom in general, it wouldn't be my choice. Can the owner send you a copy of the manual so you can see what is involved with operating it in the different modes? BTW Jim Glessner who built the looms is still around. At one time I had contact information but when I sold the loom, I gave everything to it's new owner. A web search may very well turn up his info again although it has been years since TP was in production.

 

kellytwo (not verified)

The loom is located about an hours drive away, and the owner has the manual. I think I'll look at it (and the manual), and pay particular attention to all the advice that's been given. I have a counterbalance floor loom and a very technical mind, so I don't think I would have a problem figuring things out, but I want a nice weaving experience-if that  makes sense. When I spin on my favorite spinning wheel, it's so relaxing and peaceful. But if I constantly had to fiddle with it, I would get the job done, but not look forward to the next session. I love hearing how much Claudia likes her new loom.

BTW runamuckweaving, I love reading your blog.

MaryMartha

I have spent the past year searching for the right petite CM loom to fit into my tiny, tall, narrow home. Along the way, I happened on this blog post from SpinningLizzy about the importance of depth and height of the frame in a countermarch.  It distills comments I've heard from a lot of different sources.  Something to think about.

steve104c (not verified)

Kellytwo, You are correct, because of the contermarch's shed, I think it is the best out of the three types of looms. I have a Glimakra Standard countermarch and really like it. I had to travel 14+ hours, then back, to pick up my loom. So an hours drive is a piece of cake. Go check it out for sure. Steve.
Submitted by Anonymous (not verified) on