I'd like to weave a tartan out of fine wool.  When finished, it should have about 50 threads per inch.  I've not woven with anything like this before, and am not sure what size wool I should use, what's a good source for such a fiber, nor what my on-loom sett should be.

 

I'm hoping some of the great Weavolution weavers will have some insights.

 

Thanks!

Comments

francorios (not verified)

What have you woven before? What kind of loom do you have?

I haven't woven a tartan either and I'm interested as well.

 

Have a good day!

peg.cherre (not verified)

I've woven LOTS of scarves/shawls/throws/baby blankets.  I've also woven a bunch of table linens.

I have two looms.  My favorite is a small, handmade 4-harness counterbalance.  I also own an 8-harness Macomber.  I'll have to use the Macomber for the tartan, not because I need 8 harnesses, but because my max weaving width on the counterbalance is only 24" and I need my finished width to be a minimum of 27".

laurafry

Tartans are traditionally woven from worsted wool about 2/48 or 2/50 size.  There used to be a supplier in Canada, but I've forgotten their name.  You will likely require a temple in order to get 48 to 50 picks per inch - or at least I did the one time I wove a 'true' tartan.

Cheers,

Laura

usonian (not verified)

I'm very late to this thread, but I've recently started thinking about weaving a kilt length myself, and I've been poking around online looking for hints about handweaving tartan for kiltmaking and figured I'd add what I've read to this thread for posterity!

The general consensus I've read is that it's pretty difficult to hand-weave tartan as fine as is sold by the commercial mills; with very fine wool thread packed so close together, warp threads tend to stick together and cause problems with getting the shed open; numerous broken warp threads, etc.

In one discussion at X Marks the Scot, tartan weaver & scholar Peter MacDonald recommends a 2/16 worsted wool yarn at 36 epi to achieve a 16oz tartan. (http://www.xmarksthescot.com/forum/f243/weaving-advice-64918/#post960413)

I'll be darned if I can find a U.S. source for 2/16 worsted wool yarn in the U.S., but EPiC yarns makes one in 2/18... the only retail source for their yarn I've seen is the Yarn Barn (http://www.yarnbarn-ks.com/EPIC-Worsted-99/productinfo/WY-EPIC99-/)  I need to see if they sell sample cards, it looks lovely.

I've exchanged emails with a local kiltmaker whose husband wove 4 yards of tartan using Jaggerspun Maineline 2/20 yarn at 36EPI, and said it made a fabric comparable to a 13oz commercial tartan, but with a softer finish.  He also encountered some problems with broken warp threads, but that may be partly due to inexperience.

r1mein54 (not verified)

I am waiting on my yarn order from YarnBarn to start my tartan. You need to know or find out what the sett count is for the repeat of the tartan you want to weave. If you are trying to reproduce a named pattern, there are several places to find the color and number of thread (ends) for it. I basically figured my total ends across to make a 30 inch width. You really want to use worsted wool - it is combed and has a smoother surface. It will be cheaper than buying a piece woven in Scotland but I am having to get 14,000 yard total - so there is still considerable cost. Also I found the warp & weft calculators do not work well in estimating tartan or plaid yarn quantity as it will not let you input separate colors.

laurafry

I just break down the stripes and calculate each colour as a separate 'warp' to get yardage requirements.  Once you know how many ends of each colour per repeat, it's fairly easy to work it out.

cheers,

Laura

ReedGuy

Laura, was it Briggs and Little. They are the oldest mill in the country. I think their focus however is in knitting. Although they do sell wool blankets made from their wool, so they must have a loom.

www.briggsandlittle.com

ReedGuy

There is a book by Harriet Douglas called "Scotch Tartan Setts" (1949). It was digitized in 2002 and put into the internet archives. You can go there and put th etitle into search and pull it up. Might find it useful. There are no pictures of the tartans. Another is "The scottish tartans, with historical sketches of the clans and families of Scotland" published by Edinburgh : W. & A.K. Johnston (1800) it has sample sketches.

 

A local lady weaves tartan kilts for the local highland games they have each year.

r1mein54 (not verified)

Published tartan pictures can also be found in the Robert Bain book " The Clans and Tartans of Scotland". My most used source now is going to,,, http://www.tartanregister.gov.uk/index.aspx every tartan ever designed and registered is there and you can register and get the colors and ends count emailed to you.

CamillaValleyFarm

Hi Laura

I noticed this old post and think it might have been us that you were thinking of.

We were carrying Tartan yarn from Scotland back in 2007/2008 but had problems with our source of supply. After much searching, we now have an arrangement from another Tartan Weaving Mill in Scotland and are now stocking 2/16 Worsted Wool Tartan Yarn in 23 Colours.  There is more information here:

http://www.camillavalleyfarm.com/knit/tartanweavingyarn.htm

Nina Manners - Camilla Valley Farm

laurafry

Hi Nina,

Good to know.  Thanks!

cheers,

Laura

jwms

Have been looking for info on the easiest wap to warp a loom for weaving tartans for kilts. Counts for the set is all easy to get but the actual setting up and weaving is where I am having trouble. Meeks book on warping with a trapeze seems the most likely way to go, but looking for someone who has done it so I can avoid any pitfalls.

Peg.Cherre (not verified)

JWMS, I don't have a warping trapeze, but do use a warping valet every time I warp.  I find it easy to use, to move from loom to loom, and it doesn't take up any space like the trapeze.  Laura Fry turned me on to the valet.  You can find her on Weavolution, and on her blog (with 32 links to warping valet), and on her YouTube channel with a video of her using the valet.

Eileen Crawford

I recently purchased Jaggerspun Superfine Merino 18/2 worsted wool for my planned Crawford tartan.  It is lace weight at 5,040 ypp.  I plan to sample until I get the desired sett.  I'm planning a scarf for my 87 year old father and each of his 8 grandchildren.  

I look forward to hearing of your progress on the tartan you have planned.

Albert Wrigglesworth

I know I am a bit late in this thread, but for any new readers this might help who may be new to tartan weaving. 

Every tartan design has a basic sett as we know which is repeated, generally symetrical.  Take your thread count total (ends) of the sett, mine is 128, and divide it into each colour count.  Navy Blue 70/128=46.875% so I round it up to 47%, and so on with each colour. Multiply the percentage by total yards needed for weft and warp... for example: .47 x 14,000 = 6580 yrds. My sett has 6 colours, so I do this for each colour.

It does not matter what your epi-ppi is for your project.  The sett is set. (no pun intended). My sett size is controled by the epi-ppi but not by the actual thread count for the sett.  So, 30epi gives me a sett size of 4.3" approx, where 20epi=6.4" for plain weave.  It is exactly the same idea for 2/2 twill which is the "true" weave for tartan.

Just for fun...Tartan is for the design on the kilt, and the material over the shoulder(s), having the same design, for the Great Kilt is called the Plaid.

Haven't seen too many people wearing an actual Great Kilt these days.

Happy weaving;

Albert

Andrew Kieran (not verified)

Plaid means blanket I understand.

The kilt has changed over time. Don't worry too much about trying to copy the commercial kilt. The difficult thing is to get your weave balanced, so you get squares rather than rectangles. I'd suggest doing sampling with a small warp on the same loom you plan to weave the larger piece on. Get yourself a scale of epi's and work from one end to the other. Give them all the same finishing process and see what you get at the end.

Important to use the same loom cos differing beater weights and tensions and other stuff (height of the shed, distance from fell to shafts, etc) affect the ppi a fair bit.

You can increase your PPI by lowering the tension, useful for denim and such.

ceaderton

most helpfull-I am going to try a tartan weave using number 8 pearl cotton prior to actual tartan(I hope  to weave) thinking of using jagger spun superfine meriono 2/18(never sure if is 18/2 in USA).Not real exact but i have only been weaving about 2 years -but thread was most helpfull and time will tell how I go with this

lisarothwell

Question,  what is the rule of thumb?  after warping directly on the loom for many years (rigid heddle)  at what length is it easier on a four harness loom to warp on a board vs directly on the loom?  it has been many years since I have worked on the 4 harness, which I recently inherited from my mothers estate. Thanks, 

sandra.eberhar…

Most people do not warp directly on the loom unless you have a sectional beam and use spools instead of winding a warp.  There are too many threads and massive tangles will happen.  You may want to get a beginning weaving book, like Key to Weaving, or The Big Book of Weaving to show you how to prepare a warp.

Submitted by Anonymous (not verified) on