I'm trying to set up a double weave in Weavepoint.  The instructions in Weavepoint's help are minimal and nearly useless.  I figured out a few things, but have not yet met with success.  I've created two files, one for the front, and one for the back.  Then using the Overlay, selected Construct Doubleweave, then imported (overlayed) the opposite file.  No joy.  Any ideas?  I've also turned on compression.

Thanks all,

Alison

Comments

ReedGuy

Alison, I have not used the program so I can't offer much. But, is there a way to just take a regular draft and use a wizard or menu item to convert to doubleweave? In WeaveitPro Demo you can do this. If you want, just bring in a WIF file and go to the wizard. You don't have to design each layer. The demo does not print or save. But maybe it can help you understand the construction of the doubleweave draft and help you with your existing program.

Alison (not verified)

No wizard I'm afraid - just what I described above.  Thanks for the WeaveitPro Demo suggestion.  I will definitely play with it.  As you say, it may give me some insight.

danteen (not verified)

Are you trying to weave a double width piece of fabric or do interlocking areas of double weave blocks?

There is a function in the Transform menu called 'Translate".  When you call up that box you get an option to "Construct a double weave".

If you have access to the manual, look up the instructions for that function.  It may be what you are looking for. I have not used "construct a double weave" but it sounds as though it would work for doing double-width.  Though you may have to shift treadles to get a treadling sequence that will work for the shuttle order that you need.   I don't know.

When I am doing the blocks style, I just create a profile draft and use the Translate item in the Transform menu.  I plug in an "odds on top" tie-up into a 4 x 4 grid for the black squares and its opposite, the "evens on top" tie-up into the right-hand  4 x 4 grid for  the white squares.  (Though you can use any doubleweave tie-up that you like in either of those squares.)  Then click to make it happen.

Save your profile draft first because you may need it to make changes.  Easier to do to the profile than the weave file.

Also, after the "translation", you will need to add the alternating colors to the warp and weft plans and change the view to double weave to see what you've done.

The double weave view only works in the "design" view and not in the "draft" view.

 

Hope you get your problem solved.

Teena Tuenge

Alison (not verified)

Teena,

Thanks for your suggestions.  I have been playing with the "construct a doubleweave" function but that is where I've been having trouble.  The front and back interlock and mirror each other.  

I think my next steps will be to play with some of the ideas you suggested and see if I can work on something simpler first - like a simple doublewidth plain cloth and go from there.  That will help me figure out how to visually interpret what I'm seeing on the screen.

I had created a front and back file, but not as a profile draft.  That is a good idea.  Also, I forgot to change the alternating colors in the warp though the program did it in the weft.

Submitted by Anonymous (not verified) on