I am looking for some direction on the easiest way to wind a warp using threads of various weights randomly throughout the warp (not stripes).  Any suggestions?

thanks!

Comments

Claudia Segal (not verified)

I made three shawls with supplemental warps that were novelty yarns and spaced randomly throughout the warp.  This is the completed project and I have explained how it's done in the notes.

Hope that helps some.

Claudia

Michael White

You need to warp them one at a time just like you warp the rest of your warp. Here you can see a warp using ladder, eye lash and other novelty yarns. You can see the scarves here www.handweaver.us Cheryl will nomally put on a two scarf yarp at one time and weave them in two color ways. No two of anything are every alike. 

Michael

 

weav4fun

thanks for your help, Michael and Claudia!  By way of explanation...I am on a team of five in the 'Sheep to Shawl' competition at the Estes Park Wool Market (http://www.estesnet.com/events/woolmarket.htm) this weekend.  We have to spin the yarn and weave a shawl between 8:30am and 2:30pm!  The warp yarn can be prepared and the loom warped ahead of time, but the weft yarn has to carded, spun and whatever else they do to it (i'm the weaver - the other four are spinners!!) beginning at 8:30 Sunday morning!

So, as you might imagine with four spinners the weights are a bit different so I just want to randomly mix them in the warp.  I was hoping to learn some easy way to do that, but i'll just randomly wind them into the warp as I go.

thanks!

lkautio (not verified)

Wind your warp four threads at a time (one from each spinner), making a 4x4 cross.  As you wind, either keep a finger between each thread or put them through a paddle or reed set across two chairs - something to keep them separate. When you thread, pick randomly from the four threads in the group.

Or, wind four separate warps, each with one spinner's yarn. Put lease sticks through each cross. Work front to back, sleying as desired from each of the warps.

Laurie Autio

weav4fun

Thanks, Laurie.  I've never wound multiple threads at one time.  I'll have to experiment with this method.

 

Cathy

lkautio (not verified)

I almost always wind 2 or 3 threads at a time.  It saves a lot of time if your warp color sequence requirements are amenable.

Laurie Autio

sally orgren

Okay, this is a bit different than your sheep to shawl challenge...but still deals with winding multiple warps!

I know this looks messy, but it's a project currently underway of donated knitting yarns. I am tying this warp onto an existing warp already on the loom. I am planning a diversified plain weave, so that is why you see all those skinny little blue warps between the thicker, multicolored knitting yarns.

I wind with multiple warps as often as I can because it is faster. I wrap the "non-active" warps around an unused peg while waiting to "reactivate" them into the color order. (That means leaving an empty peg or two below the first peg on the warp board, and the same at the other end). You can also keep a bit a graphic design tape nearby for a low-tack solution to holding the non-active warps in place if you don't think wrapping them a few times around a peg would be secure enough for you. 

For a color variation that can be somewhat unexpected, warp with an odd number of colors like 3, 5 or 7. Threading straight draw means they come up on different shafts at different times in your treadling.

Another fun "warp randomizer technique" is to start with 5 colors (A,B,C,D,E). Place the cones on the floor below the warp board, lined up in order. Wind colors A,B,C,D down to the bottom peg and back up. Drop A. Add E (to the end). Wind B,C,D,E to the bottom and back up. Drop B. Add A to the end. Wind C,D,E,A to the bottom and back up. Continue to drop the first color when returning to the top, and add the last color dropped to the end of the color order. It sounds confusing, but if you keep the cones in order on the floor, it isn't as bad as it sounds. Makes a beautiful mock-variegated warp and uses up the stash! If you run out of one color, just substitute something else.

Hey, don't forget to tell us how the Estes Wool Festival sheep-to-shawl event went! (Post photos-we wanna see!)

Sara von Tresckow

Or, you can just warp with two threads and then "break and tie" wherever you decide to change yarns/colors. Sure it takes a little time, but is worth it. I once did a warp of around 800 threads of fine linen in shadings of blue, natural and white to approximate a random drawing - laid the drawing on the ironing board and designed the warp one small section at a time on the warping mill from half a dozen cones on the floor. It turned out beautifully.

Also, if you leave the lease sticks in when you weave, it is entirely possible to take a thread out of the cross, move it right or left a few threads, put it back in the cross and thread it. You won't notice any issues until you're at the very end where the lease sticks must be removed. Another good reason to leave them in.

Submitted by weav4fun on