I am trying to start tablet weaving and I've become confused with a step in the warping.  All the videos I've looked up show people threading the cards all at once and then you go around the pegs dropping the cards one at a time.  As far as I can understand this would mean all the cards would be threaded the same way, either S or Z.  Then the guide I was following said to warp the odd cards Z and the evens S.  I am missing how I can follow both of these methods at the same time.  I just don't see how to get different threading directions when I warp.  Help?

Thanks

Trey

Comments

Bonnie Datta (not verified)

Hi.  If your tablets are all threaded with just 2 colors you can warp them and flip them later.  Whenever more than 2 colors come into play it's risky to do it that way.  But even then, if all the S threaded tablets have the same colors in the same rotation, and similarly for the Z threaded tablets, then you can warp them in two bundles and interleave them before you start to weave.  If this is a "threaded-in" design in which every tablet has a different arrangement of colors then you are probably best to just cut the required lengths of warp and thread each tablet individually.

Bonnie.

 

Caroline (not verified)

hi Trey, what you are watching on Youtube are advanced techniques for those who are old hands at the S and Z situation. If you are following a project in a book, or downloaded from the net, ignore Youtube and go with the project. If you haven't yet got a book, there are several good ones available including Peter Collingwoods, Techniques of Tablet Weaving, and the Candace Crockett book. These will get you started and introduce the different techniques in a logical way. Its a good idea to borrow them from the library first and see how you get on with them.  I have found that the simpler books, while good for what they cover, soon leave you wanting more challenging projects.

Happy warping!

antitrades (not verified)

Ah, my wife will get to say "I told you so"  She asked, couldn't I just flip them and I thought I couldn't because they'd get all tangled.  I'm trying to keep it simple for this first attempt so it's just two colors.  I'm looking forward to seeing how it compares to the pick-up pattern I did last project.  Thanks so much for your help. 

Trey

AutumnWeaves (not verified)

You are not alone.  I wondered the same thing when i did my first tablet weaving.  I only use that technique with patterns in which every hole has the same color.  I was even more confused when the video said it doesn't matter what color goes in which hole.

This is how I do it.  Measure out my colors on my warping board, for example, color A - 22 Color B 44 color C 66 (just an example).  Each color is measured out continuously.   Once I have enough on the warping board I tie it off, similar to the way you do a hank of yarn, I put four or five ties (loosely) just to keep everything smooth and untangled and then cut.   I set up my cards on my lap, and hubby holds one end of the bunch of warp threads.  It makes it easier this way since I can just pull the colors I want and he keeps them from tangling with tension.  I thread each card per pattern then ties the ends together when working on my regular inkle loom.  This allows me to easily advance as I'm weaving.  If using a different loom that allows me to wind on my warp I follow basic warping directions for that loom and leave out the tyeing of the ends together.

fyi:  I tie the ends in one big knot, not individually.

I hope this helps.  Hopefully in the next month I will get a video up of how I do it.

ps: come join us in the inkle/tablet weaving group. :)

Submitted by Anonymous (not verified) on