I managed to take off the huge back yarn beam/roller from my old counter balanced loom so i can fit a chair in the back to thread my heddles.  This is so much easier then actually sitting on the roller and trying to balance and lean forward.  Hopefully I can finish warping and start weaving soon!

Comments

claudia (not verified)

Now it would be fun to have a picture of that!

When we improved the forums, we also improved the way you upload pictures.

Check out the Help section or this YouTube video.

Claudia

tien (not verified)

That's what I always do, because I'm short/have short arms.  Except that, since I thread back to front, it's the front beam I remove.  Makes life a LOT easier!

Tien

Sara von Tresckow

Like Tien, I've been removing the front beam for many years. In fact, I won't even consider purchasing a loom that doesn't have a breast beam that is easily removed.

 

laurafry

I remove the beater top, reed and breast beam (sandpaper beam) on my AVL routinely.  On the Leclerc Fanny I've got sufficient reach that I don't need to remove the breast beam.   So it all sort of depends on your body and your loom.  :)

Cheers,

Laura

TinaHilton (not verified)

One of the things I really liked about my big Macomber was that I could just lay the front beam and beater down on the floor.  Same thing for the back beam.  It made it sooooooo easy to get close to the heddles to do the threading.  Gosh, I miss that loom.  But I do enjoy using that room now for my sewing rather than having that crammed upstairs with my big looms.


ingamarie

Ditto on the GlimĂ„kra.. I sit on the knee beam and thread b2f. I love those looms just because you can get inside them, and also because all the wonderful superstructure gives you all sorts of ways to hang things at eye level.

Funny story-- when I first got my loom (it was given to me by an angel who needed it out of his garage) I thought it was an Ideal-- that's what he told me.  I had wanted a Standard (the bigger version) but who's going to turn down a free loom, you know. So I was putting it together and standing inside cleaning something and realized I was standing INSIDE the loom, you can't do that with an Ideal. Shivers ran down my back when I realized it was the loom I had wanted all along. And here I thought I was compromising.  

TinaHilton (not verified)

You're so lucky!  I definitely like the looms I can crawl inside.  It makes everything so much easier.  But how do you sit on the knee beam to thread?  Do you untie your shafts from the lamms every time so you can shove the shafts to the back of the loom?  I sit on the foot rest, removing the breast beam and beater first, to do the threading.

ingamarie

I take the shafts off completely to beam my warps-- and then re tie them when I'm done threading.  It's different every time so  I would be anyway.  The foot rest on my loom is only a few inches off the ground, and would not be a good place to sit.  I just sit on the knee beam and I can sort of lean back on the breast beam if I want to.

 

Ellen (not verified)

In my Glimakra Standard I remove the beater and the breast beam and put a chair inside the loom to do the threading.

But what you said, Tina puzzles me : How can you NOT untie your shafts between weaves?How would you beam the new warp with the shafts still sitting there in the middle all tied up???

 I untie them from the lamms and either place them on top of the "castle" or raise them up into some holders, which we call "shaft-horses" .

I don't know what the English word is for them, if there is one?

Joanne Hall

Hi Ellen,

We call them shaft holders.  Some of us Americans do warp just like you do, putting the shafts up out of the way.  But it is common in the US to have very short looms and small looms and it can be difficult to move shafts, so these looms need to be warped without moving them, like a table loom.  Americans use these small looms to take to workshops.  Even the larger floor looms they use at home often have shafts which can be difficult to remove.  So, they move the heddles to the sides and put the warp through the shafts to beam the warp.

The Swedish looms are much more versatile and comfortable to warp.

Joanne

Ellen (not verified)

Hi Joanne,

Thank you for your explanation. It is one of the many delights of Weavolution to learn about other peoples' ways and looms and traditions. Of course using a countermarch loom myself (and I have naver seen anything else used in Denmark!) I was also picturing the strings going down the middle to hold up the lower lamms as being in the way. But of course now I realize that many other types of loom are used, which would not necessarily have such strings. I have never seen, f.ex, a "jack loom" except in some pictures here on this site. Rigid heddle looms exist here, but are mostly thrown out (yes, really!) because they are not considered "real" looms. My grandmother had one, and I must admit I didn't keep it.

Ellen

PS It will be great when we get a loom section working so we can really look into all these various unknown-to-us looms!

suzyhok (not verified)

How interesting this thread has been!  I keep thinking, though, how funny it must be for people who have no idea what warping and threading a loom are all about!  We sound like contortionists!

The few times that I have been able to weave on an old fashioned barn loom was amazing because I felt like I was a part of the loom as I wove!

Suzy

 

Michael White

Ellen, Claudia(?) posted this this web site the other day. If you want to see some looms.  

http://possumjimandelizabeth.com/ Go to "our virtual museum".

Cheryl ties up her heddle frames when she dresses all her looms, which you can see here www.handwoven.us. This brings the eyes of the heddles to eye level as she sits inside the loom to tie up.

Michael

Ellen (not verified)

Thank you, Michael, it is great to get educated on this site. I am a subscriber to Handwoven and have seen the pictures in there. But those old looms in the museum look really ....ehm different! :-)

TinaHilton (not verified)

I warp back to front, and after the warp is wound on the warp beam I just thread from the normal position of the shafts.  I do put the shaft bars on the holders to keep them from swinging, and I have to lift up on the bottom bar so I can slide the heddles.  I don't have the option of moving the shafts on my jack looms, so didn't see a reason to do it with the countermarche.   My Glimkara is the 150 cm one.

Do you move the shafts to the back so they're closer to the warp beam?  I have the holder for the lease sticks holding the cross positioned so it's close enough I can reach the threads while leaving the shafts in their "working" position.

It is interesting to hear how everyone dresses their looms.


Ellen (not verified)

Hi Tina.

Like you I beam the warp, then take the shafts down, but tie an extra loop around the lower bars with the outermost texsolv heddle so the heddles slide better. But the shafts just hang from the top construction. I then remove the breast beam and place a chair right in front of the heddles, and like you I have the cross in lease sticks as closely behind the shafts as possible for comfortable reach. Theyb are held by string.
it all sounds like much the same as your method, except I couldn't understand how you could beam a warp without untying the lamms from the shafts. The strings going down the middle to the lower lamms would be in the way, Was my thought.

Mine is the 150 cm Standard as well.

Yes, it is very interesting to exchange methods and ideas with weavers from all over.

Ellen

TinaHilton (not verified)

I just scoot the heddles to the sides and bring the warp through the shafts (on either side of the center cord)and over the front beam.  Then I wind on.  I wish I could use the trapeze my husband built for me, but the ceiling slopes in this room and it won't fit.  So I just do the best I can.

lkautio (not verified)

Tina, I use a pvc pipe hung from the ceiling with u-bolts for a trapeze.  Cheap, and it works in my low slope-ceiling studio (perpendicular to the slope).

Laurie Autio

Submitted by Anonymous (not verified) on