I have tried warping my Julia 8s countermarch loom several ways and it seems to me the only way to dress the loom, back to front, is to remove the 16 cords that go from the shafts to the lamms and raise the shafts to get to the back beam.
Here is what the loom looks like from top and bottom:


Am I missing something? I like to rough sley the reed and move my lease sticks to the other side of the reed. The warp is weighted in front of the reed, goes through the reed and the lease sticks to the back beam. I usually leave my lease sticks in while weaving.
I realize I can warp front to back but it is more difficult to reach the shafts from the back of the loom to thread them. I prefer warping back to front but if I go over the top of the shafts, the warp would be divided in half by the cords hanging from the top jacks to the lamms.
Any thoughts, ideas, suggestions?
TIA, Claudia
Comments