Hi!

I'm trying to set up a tabletop Varpapuu loom.  What a funky loom!  Apparently it's a discontinued Finnish brand, known more for its large countermarch floor looms.  This one happens to be a variation on a jack loom.  Does anyone have a user's manual or a photo of how the harnesses system should look from the top?

Any help or leads would be appreciated!

Comments

Sara von Tresckow

 First off, I don't think that Varpa actually made these. And it isn't "funky" but a "stink normal" table loom. They pretty much all have a rising shed.

There were sold under the name Kothe Nordia and are standard hand operated tabletop looms. You could get floor stands for them.

The method of operation would have been over pulleys and cords connected to the hand levers.

Varpa is still in business as a supplier of weaving yarn and tools - their web site is:

http://www.varpalooms.fi/yhteystiedot.html

(This is the contact form for them). I have ordered magazines from them within the last 2 years - just text a simple business letter in good English and see what they can provide you with in the way of information.

laurafry

The loom looks identical to the lever loom I purchased from Varpapuu when I went there for a 2 week weaving class in 1977.  The cords were long enough to be attached to either end of the shaft and up through the lever so that when you pulled the lever forward, the shaft raised.

Cheers,

Laura

sequel (not verified)

I just happen to have the booklet you need.  It's for the Model "Kothe" and the pictures show an 8 shaft table loom.  It's a small 8 page booklet.

Would you like it?

Adele (not verified)

Hi,all i'm very new to weaving, got the bug, I don't own a loom as yet but on impulse purchased a varpapuu loom off of ebay yesterday which is somewhere in the Netherlands.  So my loom has not arrived yet.  I can see by your picture that it is the same 8 shaft loom which unfortunately is not produced any more, with instructions hard or impossible to come by.  So....please please please does any one have an instruction manual or photo copies  that could help me.

Regards

Adele from England new to the group : )

Sara von Tresckow

 Adele, these are very normal table looms. It your purchase is in good shape and not missing any parts, any good basic weaving book will show you how to warp and use it.

Loom makers usually include only assembly instructions with their products expecting buyers to purchase the howto books of their choice.

sequel (not verified)

Adele

As I said in my Weavolution post just above yours - I have the book that goes with your loom.  I can have my husband try to scan and send it to you as a PDF.  It doesn't tell how to weave as much as it tells briefly how to thread the loom.

Susan

Richmond, VA, USA

Adele (not verified)

Hi  Susan,

I would be grateful for any info on the loom, it will at least show me how the loom should look when it arrives and I will know if any parts are missing,  I am already reading Step-By Step weaving by Neil Znamierowski to show me how to warp it it : )

can't wait!    my email address is [email protected]

Many thanks to you and hubby for help

Kind regards Adele UK

 

Catbramble (not verified)

Hi Susan,

I have just bought one of these looms too, and if you do have a PDF of the manual, I would love to have a copy please.

My email is   [email protected]

Thanks,

Sue

Vigdis (not verified)

Recently a friend gave me an 8 harness Varpapuu Kothe Nordia table loom.  It was a gift from her mother over 35 years ago.  My friend put a wool warp on it and then covered it up.  Until she gave it to me, it had been sitting safely stored in my friend's house.

 

I have the original diagram illustrating how it is to be set up.  I am happy to send a PDF copy to anyone who needs it.

Does anyone have a PDF of the original booklet that they could share with me?

 

Kimbomum (not verified)

Having just got one of these looms, without any set up instructions or diagrams, your pdf would be the golden key. Please email me a copy if you are able.

Many thanks in anticipation

Kim

Kimbomum (not verified)

I didn't spot this posting soon enough! I'm in the same situation you found yourself in. If you got something sent to you that sorted it for you, could you email it to me please?

Many thanks in anticipation

Kim

sequel (not verified)

I have a PDF of the Varpapuu booklet.  Who needs it?

Kimbomum (not verified)

What a saviour! I would be very grateful if you would email me the pdf to:

[email protected]

Many thanks in anticipation,

Kim Gibson

Vigdis (not verified)

I have the original manual in addition to the setup instructions.  I just sent them to you.

Vigdis (not verified)

I have two PDFs ffor the Varpapuu 8 harness, table -- one is of the original instruction booklet (sent to me by a weaver in England), and the other is a drawing explaining the set up (that came with the 35 year old loom given to me a few months ago).  I'm happy to send to anybody who needs - e-mail me at [email protected].

keni54

Hi, I have just acquired a Varpapuu Kothe table loom with instruction manual and threading information, however my problem is it is all in Dutch! As a total beginner to weaving, can anyone supply me with a PDF manual and the threading information for this model? many thanks, my email is: [email protected]. Thanking you all in advance.

Sara von Tresckow

Looms do not come with "threading information" - that is found in books that teach one how to weave. The assembly directions should have enough diagrams to get the loom properly assembled. Weaving is a deep subject and you'll need to use many resources, perhaps even pay for some lessons to get started successfully.
Submitted by Anonymous (not verified) on