A 60" countermarch Finnish Varpapuu loom is being donated to the Weavers Guild of Boston.  It has 4 shafts.  I  am not familiar with these looms, though understand that many weavers like them.  Is it possible to add more shafts?  The company is out of business.  Is it possible to get parts from any other manufacturer?  I'm not aware of anything the loom needs, but it is a question that comes up from buyers.  Thanks for any help or information about these looms.

Laurie Autio

Comments

Joanne Hall

Hi Laurie,

Glimakra loom parts would work and we can cut them to length.  The price list has the prices for parts like shaft bars, lamms, tie-on bars, lease sticks, shaft holders, Texsolv heddles and tie-up cord.  Treadles would recquire some measuring and perhaps some custom fitting.  The countermarch would also need careful measuring and custom made jacks.

www.glimakrausa.com

lkautio (not verified)

Joanne, thanks, that is very helpful.

Laurie Autio

Sara von Tresckow

It is also quite possible to take one of each part that needs to be duplicated to a local woodworker and have a set made to fit your loom. I have successfully added treadles and other parts this way. Just try to keep the type of wood and weight similar - and pay attention to those pieces that need quarter-sawn boards.

Treadle weight affects balance, so pay attention there - color is of less importance.

lkautio (not verified)

Good points, thanks, Sara.  We did some of that with my Macomber and it was sucessful, but the treadle weight was less of a concern.  Do you think there would be room in the castle to add more shafts?  Or would that require expanding the castle?  This loom is in the "pile of sticks" form several hours away and I can't check anything.

Laurie Autio

 

Sara von Tresckow

All of those old European CM looms from the 70's and 80's have room for at least 8 shafts, if not 10 or 12. If that loom is anything like the Lilqvist I have(pretty much the Varpa Karelia with wedges instead of screws) they have more than one set of holes to put the castle pins into - meaning that you can contract or expand those castle runners as needed. You might need some longer metal rod to mount the shafts.

The only limitation on shafts will be the loom depth. If you put in too many shafts, it doesn't leave lots of room for flexing the warp.

With 60" width, check for torquing. Back when these looms were built, 48" was pretty much what European weavers had room for - but the demand came for wider ones. Some of those looms need either a second set of ratchet/pawls or having the warp ratchet on one side and the cloth ratchet on the other.

No, on a jack loom treadle weight is not important, but Hans recently built treadles for someone with pine treadles and he could only find maple at the wood store - he then drilled holes in them like Swiss cheese to get them to balance - the weight of treadles is part of the countermarche "balancing act".

lkautio (not verified)

Good to know that there is likely room for more shafts.  Seems like that is the first question everyone asks, even with 8 or 12 shafts.  I got a chuckle out of the Swiss cheese treadle picture, but it's an effective way to lower the weight.  I have also heard of people sculpting away the back of treadles to lower the weight.  On my Weavebird much of the countering is in the extra weight at the side, but I know the treadles are carefully balanced into the equation.

Laurie Autio

Submitted by Anonymous (not verified) on