Are there any helpful hints/ideas for securing upholstery mill ends into a rag rug. I've used mill ends, which are sown in factory, as weft for a rug. The effect is a poorly secured weft which when tugged on falls out of the woven warp. Is there a technique to use these ends that could give a shaggy ('stand up') rug effect ?  Anyone who's woven with upholstery mill ends (2-3' ends - which are sown together at one end in the factory), who could include photos to display their technique would be greatly appreciated. Thank you ! 

Comments

debmcclintock

there are so many types of mill ends...any chance you can post a photo, that would really help what direction to take suggestions?

Claudia Segal (not verified)

This looks really good!  Did you post this in your projects?  What are you using for warp, what is your sett?  I'm curious because I have a big box of Pendleton selvedges that are going to be a rug in the near future.  I'm planning on plain weave and am not sure if I'm going to use it as the only weft or stagger it as you have done.

I'm not sure I can be of much help.  Prior to my upcoming endeavor, I have used cotton fabric rags as weft in the rugs I have made.

Claudia

TinaHilton (not verified)

One time when I was at Leesburg Looms (a good source of selvedges), I saw a pile by the cash register that was really pretty.  She told me they had been returned because they were too loose and didn't weave up well. They looked like the ones in your pictures.  You might try calling the store/person who sold them to you and see if you can return them.  Or hopefully someone here can give you some good advice to make them work.  Maybe alternate a pick of the selvedges and a pick of fabric would make it more secure.

debmcclintock

Thanks for posting the photo! Looking at your photo you have two things going on that I can tell.  Your fluff weft is definitely not packed tight enough and you need to pull the fluff out towards you AS you weave it so that it doesn't pile up under the warp and later work its way loose.  The way the current structure exists the weft will work it's way out, the warp will loosen and the weft will continue to work its way out... vicious circle.

1.  Place your fluffy weft into place, take time to turn the weft so the fluff faces up towards you and "strum" it to raise it above the warp line. Beat softly to edge into place.  You should be beating the weft down tight and the fluff should be above your warp line.  The structural threads that are holding the fluff together should be locked into your warp.

2.  On the next shed, throw a pick of your warp material in between each one of those fluff wefts and beat tightly, that will make a nice compact "lock" to hold the fluff in place.  Right now your weft is fighting you and springing against each other and not giving you a good "weft/warp" lock.  Adding the thin weft will help give your rug structural strength.

Also, looking again at your photo up there it looks like you have the sett too close togeather, you do need to give the weft somewhere to go or it will pop out, maybe back out to about 8 epi to give it space and use a twill structure so things can pack/lock down. Use the twill for the heavier weft and alternate with a tabby, sorta like overshot....good luck!  Deb Mc

Karren K. Brito

It looks to me like the blueish fringe is only loosely held by the stitching.  I'm thinking of rya rugs and pulling the precut ends off the stitching and knotting them around the warps.  Followed by a tabby shot to pack it in tightly just like Deb said.

lkautio (not verified)

I wonder if using a strong feltable wool for the tabby and 2-4 picks of the tabby in between fluff would make this more secure?  Someone with more rug experience might be able to say for sure.  I do know that very twisted wool can be used as a warp in heavy weft-faced items, but it is protected there.

Laurie Autio

La Lasko (not verified)

Deb, Thanks so much for your instruction. I'm new to weaving with this material. Your suggestions will be very helpful. I'm wanting to better understand what exactly you mean when you say, "Throw a pick of warp material between each fluff weft and beat." Would it be possible to demonstrate or illustrate that via this media or could you recommend a source for viewing this technique?  Thank you, Leslie

debmcclintock

Leslie, are you familar with overshot structure or do you have a book that explains it?  Basically you throw your weft in a twill structure and then you treadle a tabby and throw a thin weft to hold your larger weft in place.  You did not mention if you had a 2 or 4 shaft loom.  You can do this if you have a 4 shaft loom.  If you haven't had lessons, it would be a good time to take some weaving lessons live from a teacher or get a good reference book.  

La Lasko (not verified)

Deb,

Unfortunatly I'm not able to weave as much as I'd like to. I do have resources that explain the overshot structure. I'll try to study it more. Once my homeschooling days settle, I'll have more time to devote to weaving. My loom has the capabilities of up to 8 shafts...currently, I utilize 4. Learning to Weave - Chandler, New Key to Weaving - McMillan, are two sources I have. On line lessons, I'm not familiar with. I'll look on You Tube, they might have a video. Thanks so much.

debmcclintock

I loaded a draft for you with color codes, it is here in the draft section

http://weavolution.com/draft/twill-rug-tabby-tiedowns-stability

You are using the tabby tiedown to give stability structure to your rug so it serves its function AND stays together!  If it can wiggle, it will come apart!  Simple truth...

I'll look in Chandler and Mary Blacks book and see if I can point you to a specific reference!

ps, this is also a test as to whether you can read a draft and translate it to your use!  

Submitted by Anonymous (not verified) on