I am researching rep weave and have purchased Laila Lundell's Rep Weaves book. I am having trouble understanding the the book's basics since I am new to weaving. I think I may be on the right track but would like some clarifications. Maybe I might try something small---very very small-- like a set of coasters to start with. I don't live near any weaving centers and have taught myself by watching videos and reading books. Does anyone know of a basic video which covers rep weaving? Thanks for your help. Kathy

Comments

Sara von Tresckow

"Rep" weave is nothing more than a warp faced plain weave. You put the warp threads so close together that no weft shows. To get the ribs, you alternated between thick and thin filler in the weft.

Just follow the thread weights and densities for a project, perhaps making it narrower than called for and follow directions. Because the warp is so close, spread it out on at least 4 shafts. It will still be sticky, so be prepared to clear your shed with a stick sometimes.

Cat Brysch

does not have to be so intensely packed that the warp clings. That is simply a variation. Photo shows a rep weave that is loosely but definitely warp dominate of charcoal and other colors and I used a black rag as the weft. It's a fun weave...you simply need to have a large weft and a small weft. Follow the draft for threading based on how you want your blocks of color to appear....maybe start out with just 2 colors to start? Here's a photo of my table runner:

RepWeaver (not verified)

Hi, Kathy

Rep is fun and easy to weave and, yes, it is plain weave. Design blocks are formed using color order in the warp along with thick and thin ends in the weft.

The Lundell book is one of my favorites. Her patterns are beautiful as presented but I choose to use fewer warp ends and weave them as "Open Rep". This means the warp is not as tightly spaced and the rag weft does show through. This adds lots of extra interest. Open Rep rugs on the floor present different looks depending where you stand. They are almost holographic.

Here is the way I weave from the Lundell book. I divide the total number of warp ends by 4 and change the sett to 24 e.p.i. I use 8/4 cotton carpet warp and thread two ends to a dent in a 12 dent reed and one end per heddle. This yields a finished item very near to the same width as those in the book while maintaining the integrity of the designs.

Another adjustment you may choose to make is to change the way Lundell threads each block. I pair shafts one and three together for one block (and its reverse) and I pair two and four together for the other block (and its reverse). I make this change because I find it easier to think of my blocks as being on either the odd shafts or the even shafts. If you are weaving on more than four shafts you can pair shaft one with shaft five, shaft two with six, etc. This brings up the other reason I like to change the threading, that is to separate the ends in each half of a block the farther distance on the loom. With a dense sett, the extra physical distance makes a clean shed easier to achieve.

You can sett and thread the drafts exactly as presented and weave a perfectly beautiful rug from the Lundell book. Have fun and enjoy the process as well as the product.

RepWeaver

Sara von Tresckow

Just FYI before using coarse threads in rep, do consider that using the 2 finer ends covers better and leaves the surface smoother.

Yes you can space the warp and use bigger threads, but some of the legance of a nice rep - especially when not used for rugs, but for smaller objects - is lost.

RepWeaver (not verified)

True, Sara, although I like the interaction between my thick rag weft and the block patterning in the warp. I also like using sturdy and readily available carpet warp. Another consideration is the huge number of heddles required to weave at 36 ends per cm. Even threading two ends per heddle Lundell's setts come out to around 46 heddles per inch. I am certain Lundell's designs are perfect and beautiful woven as presented. In the end it comes down to a matter of choice. I enjoy changing drafts to suit my own design ideals. The wonderful thing about weaving is there is so much freedom for personal expression. RepWeaver

Sara von Tresckow

Choices are only possible if weavers know that they exist.

You hopefully are aware that the 36 ends per cm are DOUBLED in the heddles so you are weaving only 18/cm or about 45 epi when using the 16/2 cotton thread. Towels in 16/2 are sett at 40 epi for a nice twill. Many European weaving ideas are done with "working" ends consisting of 2 or even more threads grouped in a heddle and treated as a single end in the reed and in lifting the sheds. This type of rep is not "Lundell's" but the typical Swedish form of the structure. 45 epi is not all that unusual - it is very appropriate for warp faced weaving.

Using the coarse rug warp gives its own effect, but certainly not the lovely fabrics I've done over the years that serve as placemats of mug rugs. Those doubled fine threads behave in their own way and give the resulting fabric a very nice hand.

ReedGuy

There is a little bit of discussion on plain weave 'repp' in "Textile Design and Color" by William Watson (pg 87-90) with other variations not talked about here. The book is digitized on http://www.archives.org

buckskinhawk

I finished my first project. It was a rug and it turned out good enough to donate to the United Way fund drive. I posted a picture last month. These comments really helped!

jj50 (not verified)

Well that's a little embarassing to not bother looking at the date of the thread before blathering on. Sheesh.

Your rug looks great! Congratulations.

sally orgren

the update information was great!

Folks who come to Weavolution in the future will learn about new resources when they search "rep weave" and find this thread.

dragonflymeadows

Hi,

I can't figure out how to thread the profile draft in Laila Lundell's Rep Weave Book. I am trying to make the blue "night and day" rug and set the ends at 32 (4 in an 8 dent reed). 

Do I understand this correctly? I thread all the border warps threads on harness 6 and 1 alternately?

Starting with the pattern, it will be P (pattern color) 3 and B (backgr.) 4 and does it start with the background color? and does it then go to P 6 and B 1 (this time strting with the pattern color)?

I would appreciate any help with this. Thanks

dragonflymeadows

Hi,

I can't figure out how to thread the profile draft in Laila Lundell's Rep Weave Book. I am trying to make the blue "night and day" rug and set the ends at 32 (4 in an 8 dent reed). 

Do I understand this correctly? I thread all the border warps threads on harness 6 and 1 alternately?

Starting with the pattern, it will be P (pattern color) 3 and B (backgr.) 4 and does it start with the background color? and does it then go to P 6 and B 1 (this time strting with the pattern color)?

I would appreciate any help with this. Thanks

Submitted by buckskinhawk on