My AVL loom (60" wide) has a single box fly shuttle.  With the fly shuttle boxes on the edge, how can I ever weave a pattern that requires 2 shuttles (shadow weave, overshot, summer & winter, etc.).  It won't be a problem with a narrow warp, but if I wanted to weave something wide, will I have to remove the fly shuttle boxes and not use them for that project?  I can't afford to upgrade to a double box right now.

Comments

kerstinfroberg

Or you can use the flyshuttle for one weft, and use an ordinary shuttle for the other weft. ("Hand-thrown")
If you, for some reason, want to use two handshuttles, just ignore the boxes.

 

 

TinaHilton (not verified)

I'll have to try it when I get home (I'm out of town for a few more weeks).  It just looks like it would be awkward to get a hand shuttle into the shed and get it thrown across with the boxes in the way.  So, either it's not as difficult as it looks like it would be, or maybe you just don't do full width with a second shuttle.

dancingfish (not verified)

Just wondering since I have the same question. I only have a single box fly shuttle for my Glimakra. Mine is attached to my overhead beater, and I have a regular beater, so I can switch them, but I'm wondering if I can utilize the fly shuttle and still manage a two shuttle weave, with a full width project.

TinaHilton (not verified)

I totally forgot about this!  Everything last spring and early summer was so messed up for with my mom being ill that my memory was worse than usual (and that's not all that great any more).  I didn't get that much weaving done last year as a result. 

Now I'm down south for the winter again and will have to wait until April to hopefully remember to give this a try.  I do have 2 warp beams so I could turn the draft and make it a one shuttle weave if it doesn't use too many shafts.  That would probably be easier anyway.

Bonnie Inouye (not verified)

I have a 60" AVL with single-box flyshuttle and I have woven many warps with two shuttles. I can do it pretty quickly. Use the flyshuttle for the smoother yarn or the thicker yarn, if there is a difference. Start by pulling with your right hand on the flyshuttle cord. Then use your left for the beater. Pick up the boat shuttle with your right hand and throw it from right, catching on the left with the left hand.  Now pull the beater with your right hand. Repeat sequence but start with left hand now. It all works out. Your boat shuttle is on your left when you want to use the left hand.  Takes a bit of concentration at first but becomes easy with practice.

Bonnie Inouye

TinaHilton (not verified)

My AVL is 60" also.  I haven't woven full width on it yet.  There is room to insert a shuttle?  I wasn't sure if the flybox would be in the way or not and can't visualize how close it would be to the warp threads.

Bonnie Inouye (not verified)

hi Tina,

I have only used a single-shuttle weave with a full width warp on my 60" loom, and the single-box flyshuttle was ideal for that. I wove a bunch of double-width full-width blankets, single shuttle, great results.

I am only 61" tall. I have to lean over to insert a boat shuttle into a full-width piece on the 60" loom. Been there, done that on a 60" Leclerc loom. That's why I bought the flyshuttle!  You can test how you feel inserting a boat shuttle into a full width warp.  I used two shuttles for some afghans on that loom, 52" width on the loom. Maybe 54" for a few warps with two shuttles, but not any wider than that for me.  You have seen me, Tina! 

That was a good question, though. It isn't just comfort. It might be hard to insert the boat shuttle on the shuttle race with a full width warp because of the flyshuttle boxes.

What are you making?

Bonnie

kerstinfroberg

Speaking of full width... I, too, have a 60" AVL with a sectional beam. The one time I wanted to weave full widt, I could not figure out how to warp the last section to the right (seen from the back), as the tension box is in the way. (Or maybe it was the two last sections)
In the end I decided to skip that section...

Any tips?

 

TinaHilton (not verified)

I'm a few inches taller than you, but it's still tough.  I just thought about weaving overshot blankets sometime.  I think if I do that I'll take the easy way out and turn the draft so it only takes a single shuttle.

I find that more than 48" is tough for me, even with one shuttle.

Submitted by Anonymous (not verified) on