I am tyring to weave a rug.  It is a rep weave rug on 4 shafts and the shafts are sticking. For example,  if I raise shaft 1, it will bring shaft 2 up with it.  It has been suggested that the inserted eye heddles on this type of weave are lifting up the fibers around it, hence lifting up a shaft that I don't want lifted.  It has further been suggested that I replace the inserted eye metal heddles with the texsolve heddles.  Any suggestions on this would be greatly appreciated.

Comments

sally orgren

For a jack loom, and the TOTT in particular, I think you need the weight of the metal heddles to keep the shafts in proper position. So I would not replace with texsolv on this loom.

Rep weave, (with its particularly dense warp), weaves better on a counter balance loom. I had trouble with my TOTT sticking too, when I did a series of rep projects @ 12 shafts. I had to use a weaving sword to clear the shed. Banging the top of the shafts with a heavy shuttle also worked (to some degree), but I was not happy with the dents that caused :-(

Also, did you check that the shaft frames are not warped, nor the metal rods are bent and catching their neighbors when lifting? (Make sure the rods are all in their eye hooks across the shaft, top & bottom.)

Also, my TOTT came to me with the shafts labeled as to order, and front to back. So if I slide one shaft out to move heddles around, I can get it back in exactly the same spot. When I have not returned a shaft to the correct order, or flipped it around, I have gotten sticking.

Final thought—if this occurs every time you raise a particular shaft, make sure there isn't a warp thread or two threaded on more than one shaft, that is pulling the other with it.

Sally

jenjscott

can you add weight to the shafts?  I know it would make treadling harder, just a thought.

rosearbor (not verified)

I think this is somewhat common with rep weave on jack looms- I have had similar experiences.  I was told to raise a single shaft at a time, but it sounds like you are doing that already!  I found I had to loosen the tension just a smidge, and push down on the top of the errant shaft.  Very slow going.   

Elk Ridge Orch… (not verified)

I was told to go and purchase some really cheap hairspray and spray on the sides to make it easier .. I tried and it sorta worked mine are sticking as well but on my 45" leclerc i push down on the top of the shaft as well, I will try loosening the tension this time

Marpeg (not verified)

Thanks for all the replies.  It sounds like this is a common problem with jack looms and rep weave.  I just hope I made the right choice in looms as I only have room for one.  Maybe I should have gotten a counter balance loom.  Too late to second guess.

sally orgren

Like you, I only have room for one floor loom. I have woven nearly everything on my TOTT, from doubleweave, to krokborad rugs, to open sett lace weaves. So unless you dedicate the rest of your life to weaving rep, you have likely made a good loom choice.

The longer I weave, the more I realize there is no *perfect* loom. Sometimes the reason(s) you buy a loom change over time as your skill set and interests develop, and that is okay, too.

And if you decide to weave rep the rest of your life, I would confer with someone like Rosalie Nielson or Joanne Tallarovic to find out what kind of loom(s) they use and recommend. Or, take a class at Becky's Vav Stuga, to try out their looms and techniques before you make the big commitment in $$ and space.

Marpeg (not verified)

Thanks Sally,

I appreciate your posts.  I purchased this loom last year at the MD Sheep and Wool Festival and may have met you.  My memory does not serve me well these days.  I'm planning on taking out the shafts and cleaning everything really well.  I'm not giving up on this loom yet.  I just feel like we have a great future together.

Submitted by Anonymous (not verified) on