I have a 4 shaft 4 heddle floor loom. I don't know the make of it, it really looks like it was handmade, very old but works perfectly. I am a new weaver and just completed a plain weave scarf. I want to try the log cabin pattern, I am still learning to understand the drafts. Someone told me to wind the two colors seperately on my warping board which I did. Now how do I thread the heddles without getting the two colors tangled up? Should I do all of the one color first then the other? Seems I might make a mistake doing that way rather than by the pattern. 

 

By the way, I watched these individual videos by Elizabeth Wagner on YouTube that take you step by step through the process, EXCELLENT. I had no problems following them to begin my weaving.Though this would help. I read some posts by people who were having difficulty warping etc.. SHe explains them really good for beginners like myself.

Comments

ReedGuy

Is the warp suppose to be stripes, with alternating color changes? If it is stripes, I think what was meant to do was measure each color stripe and either tie it into a bout or place it on the loom as each is measured. If not your going to be crossing too wide an area of warp, an 1" or so in width is no big deal, but if your talking 6" or more, no good.

Wait for some other responses to come along, this is a new post. See what others say. I'm one of the new weavers here to, but I like to keep things in order when warping.

paulz

I always string the heddles along the reed. I have tried since your posting to just try and work one colour at a time. The results were as I thought they would be but felt compelled to make sure by trying a short stringing first.

If you string colour by colour the first colour that you have sleyed through the heddles get in the way of your hands when coming to sley the second or subsequent colours.

It takes longer to sley the heddle because you have to keep counting and looking at where you are on the reed. Even when I had my glasses on I kept miscounting where I was. If you are sleying the reed as the draft is one at a time rather than colours you just have to put the warp through the next heddle or slot in the reed.

Finally I found the placing of the heddles to be infuriating. I had to make sure I had enough heddles between each colour to sley the others.

I was going to try for an 80 warp 3 colour pattern but gave up after 10 goes.Paul

endorph

useful suggestions t make - I would have wound the colors together, not separately but. . . Maybe someone with more experience can help. . . .

Peg.Cherre (not verified)

Log cabin is 1 dark, 1 light for a time, then switch to 1 light, 1 dark.  I have had NO problem holding 1 dark & 1 light thread together on my warping board, subsequently beaming them together and then threading.  I should say I am a back-to-front warper.  Someone who warps front to back may view it differently.  In fact front to back is one of those things I really should practice to get good at it since I think it's helpful for some warps.

sally orgren

I can warp both ways, but really DO prefer back-to-front for most projects, and especially for beginners — to eliminate some the questions and challenges you are facing now. 

OK. So you have two warp bouts, one of each color. That suggests you are planning to warp "front-to-back", meaning you will sley the reed, then thread your heddles (from the back of the loom, so be sure to turn your draft upside down when you do this) before beaming.

Peg is correct. For log cabin, you typically thread a dark warp and then a light. When the design block changes, there might be two darks or two lights next to each other before you continue alternating the dark-light or light-dark order of warps.

You didn't say what your sett was. If you are weaving 24 ends per inch, you can "rough" sley 2 per dent in a 12 dent reed, making sure there is a light and dark warp in each dent, so you will have what you need when threading.

Then proceed to thread your heddles from the back. At this point, you are following your draft (upside down). At times, you may be threading two dark warps next to each other before proceeding to the light. (Meaning you'll have to select a dark warp from the adjacent dent.) This also means some of the warps might not have a directly straight path from the reed to the heddle. We will correct this later.

When beaming, there might be some tangling in front of the reed with this method. Hanging some weights on each 2-3" bout usually helps. (Like 16 oz water bottles.) Adjust the water bottles back down to the floor when needed. Never use a dog comb/pick to comb out tangles. Pull on the tangled warps hard, give them a sharp tug and snap. The further away from the loom you stand when doing this, the more likely the tangles will just "shake" out.

When the warp is beamed, you will want to come around to the front of the loom and correct the errant warps from your "rough" sley. (Make sure the warp path from the heddles through the reed is a straight line. NO warps should cross over to a different dent. At this point, there may be places where there are two dark warps or two lights adjacent in a single dent.)

Daryl Lancaster has an alternate method. She ties a piece of string half way across her reed, the full length of the reed—essentially dividing the reed into sections, top to bottom, for as many colors as she needs. She sleys one color above this string, the other color below the string. This keeps the warps separated when threading. However, you may still need to check the warp path when you are finished beaming.

Can you visualize this? Does this help?

Sara von Tresckow

I know it sounds "easier" to wind two warp chains, one of each color - and for the winding part, it is.

The difficulties begin when you apply these two chains to the loom, mixing the colors. The best way to get a warp on a loom without tangling, referred to in most places as " warping the loom" is to put the warp chain loops on the tieon stick, spread the threads out on the lease sticks to the reeded width, and beam them onto the warp beam. Of course, this assumes that you have done your color striping at the warping board. Once this color coded warp is wound on, you need only thread your heddles in the order of the cross and then put the appropriate number of threads in each dent of the reed.

When you begin by poking threads through the reed - a thread from chain A followed by a thread from chain B, repeat until you need a thread from B followed by a thread from A - you are not going to fail, but are priming yourself for unnecessary tangles.

Let's hope you have solid thread crosses in each of your chains to keep the order - if that is missing, the issue of tangling will be much worse. The thread cross, recommended in every weaving book, is to insure that your threads come out of the chain in the same order as you wound them - if that order changes significantly, warping becomes a terrible mess.

Long story short - for striping and multicolor warps, breaking and tying on the board or mill saves headaches later in the process.

Ann Booth

I believe it would have been better to warp together the 2 colors now. Will be interesting to see what tangled mess will happen and what I do to avoid that. Thanks for response.

Ann Booth

Thanks everyone for your quick responses. I think I have found a great place for answers to my many questions. Thanks

sally orgren

Patience is a virtue!

Beam slowly and watch the spot where tangles are likely to form. Try to work them out before they bind up too tightly.

If you get in a pickle (or tangle!) you can always stop and ask for advice.

If you break a warp thread, it is NOT the end of the world and everyone has done it.

And if this warp is short (like 3 yards or less) and it is not a wool warp, it might go easier than we are anticipating.

Ann Booth

Well I have it all threaded, no problems. I warped the one color first skipping where the other color went and then put the other color on. Alot of counting and recaounting, but it worked. So, so far so good we will see now if the pattern turns out.

Thanks again everyone.

paulz

Well done. Most people find threading a chore. I actually enjoy it especially the feeling of satisfaction of finishing a steadily worked on draft.

We would love to see pictures of how far you've got and others as you weave.

 

ReedGuy

Yes, well done. I hadn't realized you were talking front to back warping, but it must have been a challenge in itself with ends brushing across one another with a web of warp ends. :)

Sally's suggestion of the string across the reed to separate the color into layers would have been helpful I think. Or maybe attach a warp stick or dowel rod, if only a couple colors.

Ann Booth

Does anyone know of a video I can watch to see how. The log cabin is woven??

Ann Booth

Do i throw the two shuttles from the same side??

Peg.Cherre (not verified)

I don't personally know of a video, but it is quite simple.  You have to warp the loom as follows: dark, light, dark, light, dark, light...light, dark, light, dark, light, dark.  You can make your blocks wider than I've shown here, it's just to demonstrate that you alternate colors, then switch which comes first, so you have double light threads in one place and double dark threads in another.

Then for the weft, you (generally) follow the same color order as with the weft.  It's all done in plain weave.

There are, of course, lots of variations - what I've described is the simplest log cabin, which is a shadow weave.  Check out this draft http://weavolution.com/draft/log-cabin in the Drafts section.  Go to handweaving.net.  Google log cabin weave - I'm sure you can find drafts. 

 

Peg.Cherre (not verified)

For log cabin I like to start my shuttles the same side of the loom, but it isn't important.  What's important is what works for you - for your brain - to understand what color comes next.  It's also important that you know how to 'twist' those two colors at the selvedge.  I know how to do it better than I can explain it, but here goes...

You want to 'catch' the waiting thread in the 'loop' made by the weaving thread.  So if you're throwing the dark shuttle, the light shuttle is idle for a moment.  Make the yarn for the dark shuttle go underneath the thread for the light shuttle so that your selvedge will be nice and neat with no loops made from that idle thread.

I'm sure someone else here can explain it MUCH better than that!

 

Ann Booth

Thanks for the help tomorrow I start to weave and we will see if the log cabin pattern shows up.  Wish me luck!

Ann Booth

When I begin weaving the log cabin pattern do I overlap the two colors to start with or do I leave the eds hang a bit out the side?

Ann Booth

I was ready to begin weaving and After I wove on several scrap threads I noticed that in three different spots there were two threads together rather than over under, so I'm assuming somehow I miss threaded the heddles?? Now what do I do??

pammersw

Are the ones on each side correct? If so, you can just make a string heddle for the wrong one. If a bunch of them are wrong I think it is better to just unweave, untie , unthread, and rethread the wrong  ones.

laurafry

Log cabin is supposed to have two the same colour together to change the blocks. If you have two together where they aren't supposed to be, just take the threads out and swap them so they maintain the dark/light or light/dark sequence. Cheers Laura

Ann Booth

I found the mistake, seems I missed three heddles or the thread slipped out of them some how. This has been a very interesting project so far. Learned how to correct many mistakes.  think I have to just untie the three I missed and thread them through the correct heddle. I have to check back through them all though to make sure they are still in the correct order. Well I guess we learn by our mistakes. I have a 16 dent per inch reed so its pretty hard to see everything thats threaded. This is such an old loom I dont even know if I can find other reeds to fit it or even if I can get this one off at all.

Thanks again for all the help and so prompt too!!! I will send a pic as soon as I get going on this. 

Woodburner

Rather than untying etc., make string heddles for the missed ones.

pammersw

I untied and restrung a bunch once, because my "3 that was supposed to be a 2" was followed by every one after that being one off. If it was just that one, and maybe one or two others that were off, but the ones in-between them were ok - I'd just use the string heddle. My instructor was so excited to get to show me how, then realized that I'd said that the twenty or so to the left of it were off, also. Thus, I restrung that part of my project. You might not have to. :)

Ann Booth

Well what do you think? Took a while to get it started. Thanks to all who  advised.

paulz

Looks fantastic - I don't even need to say for a first. Its fantastic anyhow you look at it.

You're right. There's nothing like mistakes for learning from. Even worse when you make the same mistake the next time you weave!!!

Paul

sally orgren

Log Cabin can also be called "Shadow weave" or "color and weave effects". Now that you have the hang of it, you can poke around for other patterns with warp threads in two colors to build on your skills.

(A secret— winding a warp with two warps at the same time is 2x as fast! And your next threading will be MUCH easier and faster too — I promise!) Happy weaving. 

pammersw

And, when you do them two at once, one of each color is in each section of the cross. It doesn't matter which one you take first when threading...so dark-light or light-dark doesn't matter, just follow your threading and it all comes out even. AND fewer tangles because the colors are already spread out across the width of the weaving.

Ann Booth

I think for my next project I would like to try and make some dish towels. I believe it is ReedGuy that makes some beautiful ones that I saw in the projects page. I'm still trying to navigate this website and I did send a few comments to him, but I don't believe I saw an answer. Are they hard to make, is there a good simple book I could use, what is the best material to use etc... If this doesn't make it to him, can someone help me out?

I love this site!! 

Ann Booth

By the way, I figured out how to put a picture in my avatar space. This is my loom. I believe it is homemade. If it isn't does anyone recongnize a make?? No names on it anywhere. I got it for FREE at an estate sale.

Artistry

Ann, There is a Towel Group. You can glean a lot of good info from going there and reading old posts, if that's helpful to you. Also there has been a recent thread about good materials to use, so go to the dashboard and look back through the forums posts. You can also do a towel search on Weavolution. Handwoven Magazine has a design collection devoted to towels. I believe the collection is available through Weaving Today, but lots of weaving shops carry this too. Halcyon Yarns carries kits, so do some other yarn companies. Towels are a GREAT way to practice weaving, have fun, learn new techniques. Great for gift giving , practical and pretty, for the novice and the advanced. Go for it! Cathie

Artistry

Ann, There is a Towel Group. You can glean a lot of good info from going there and reading old posts, if that's helpful to you. Also there has been a recent thread about good materials to use, so go to the dashboard and look back through the forums posts. You can also do a towel search on Weavolution. Handwoven Magazine has a design collection devoted to towels. I believe the collection is available through Weaving Today, but lots of weaving shops carry this too. Halcyon Yarns carries kits, so do some other yarn companies. Towels are a GREAT way to practice weaving, have fun, learn new techniques. Great for gift giving , practical and pretty, for the novice and the advanced. Go for it! Cathie

ReedGuy

Which draft Ann? I saw no messages or posts by you on my project pages.

I did notice that something is broken on the forum that won't allow yarns, manufacturers and such to be added. Access is denied.

Like Cathie said, there are lots of sources for towel info on here and other sites. Many samples have become towels or rags I suspect over the years. ;)

pammersw

Wow, Ann, free at an estate sale? How did you manage that? I don't have a loom of my own yet, so joined the guild so I could rent one.

Ann Booth

Just plain luck. My girlfriend heard of an estate sale from a co worker who said they had a loom and all the fixings. She knew I was weaving and she asked about it and they gave it to her. Guess they just wanted to get rid of stuff. Lucky me. What a great girlfriend!

Ann Booth

How do I find out the sizes of all these cones of thread that I have for weaving? None of them are labeled.

Ann Booth

Sorry it was someone else.

Thanks anyways!

Submitted by Ann Booth on