I am "considering" an AVL warping wheel. What are the significant advantadges and can it be used to wind warps without the reed (just the cross maker as if it is a board) and any other great reasons I should consider it?

Dawn

bloominloom.com

 

 

Comments

Weeweaver (not verified)

I bought what I think is the first Warping Wheel sold in Maine and have never regretted it. I make such a mess of front to back warping that I gave it up as too frustrating for me. Using the wheel makes so much more sense to me, because I only need one cone or ball of yarn. I can even wind from a swift, if I need to. Then there's the part where I don't have to remove any warp and carry it anywhere, just unwind it onto the warp beam. I got one of the crossmakers that Dick Lindell made, before he sold the design to AVL, and it still works just fine. I like that I can move the wheel from one section to another easily and also that the counter keeps track of where I am if I get interupted. All in all, I would recommend it to anyone who winds warps of 10 yards or less, except for Tien, who uses hers for that "Froghair" silk she uses. She has wound around 15-20 yard warps with that, I think. Good luck, Wee

tien (not verified)

Actually I got a 37-yard warp in 60/2 silk onto my loom using the AVL Warping Wheel. I am fairly confident I could have done 45 yards, 50 might have been pushing it. I also think I've done 25-yard warps in 30/2 silk without really pushing the limits of the wheel.

You can use the AVL Warping wheel to wind warps without the reed, and in fact I have instructions for how to wind a back to front warp on my blog, here: http://www.tienchiu.com/2013/01/winding-a-back-to-front-warp-using-the-…

To wind the raddle cross, you will need another crossmaker, with shorter pegs than the AVL crossmaker has. It's not hard to make your own - I did it with a saw, chisel, and drill in about fifteen minutes, and clamped it to the wheel with a small C-clamp. The only big difference is that you do not get end loops with the warping wheel - so I just tie the ends of each bout in knots (dividing the bout if necessary to keep it down to 1-2" per knot) and then attach the knots to the beam with cords. Works just fine, with a little more care.

I expect that winding a front to back warp would be no problem at all.

The advantages of the AVL warping wheel over sectional warping with spool rack and spools:

Don't have to wind spools, which can save time (depending how long your warp is) and also doesn't waste the excess yarn on each spool.Can easily wind from multiple cones at once (I usually warp with 3-4 cones) to speed up the processEasy to have every section a different color - just switch cones when you want to switch colorsFaster for narrow warps (I have not compared, but others have)

The advantages of a spool rack and spools:

May be faster for wide warps in a single color (have not tried to compare)Can be used for longer warps. (I have a friend who puts 100+ yard warps of 10/2 cotton onto his loom. You can't do that with a Warping Wheel.)Easier to wind arbitrary lengths of warp. The AVL Warping Wheel has a circumference of 2-3 yards depending on how you set it up, but changing the positions of the spools is something of a pain, so I almost always wind warps in 3-yard increments (the circumference I tend to use). Winding a 5-yard warp may involve some math and/or switching spools around.

By the way, it's quite possible to wind two or more sections at once using the Warping Wheel - I do it quite often. I also wind from multiple cones at once (using a paddle and an (optional) tension box to even out the tension between cones). I have written up how I do it at http://www.tienchiu.com/how-tos/equipment/tips-for-using-the-avl-warpin… .

All in all I think the AVL Warping Wheel is an awesome warping aid, and I wouldn't want to be without one!

Dawn McCarthy

Thanks Tien, I hardly ever warp F to B but would like to wind wider bouts just as you would with a warping mill.   Looks like you could wind skeins also?  Quite expensive but I hear good things.

Dawn

tien (not verified)

You could wind skeins with a minimum diameter of 2 yards, but I wouldn't recommend it - the wheel is significantly heavier than a skein winder, and you'd be risking repetitive motion injuries in your shoulder if you tried doing long skeins on a regular basis. (Of course it's all relative. A 25-gram skein of the stuff I've been weaving lately would be about 600 yards, quite a bit to wind manually regardless of equipment. A similar weight skein in a heavier yarn would go much faster, of course.)

I really love my AVL warping wheel. I think it's a great investment.

debmcclintock

I use mine with my avl wdl with the sectional warp beam. I also use it to wind warp chains to go on my Cranbrook using my trapeze onto my plain warp beam. I think it is a great tool. I do like the crossmaker! Nice add on. Worth the $$$ if you are looking for a tool to make warping easier.

mrdubyah (not verified)

I like it because it's fast and makes it possible to get a whole warp on my sectional beam in an evening.  Tape the ends of each bout to keep the threads in order and make threading easier.  Threads can be easily lifted off the tape and inserted into the heddles from the rear.  I even made a little wire thread pusher to facilitate threading heddles from behind (see below). Then I return to the front of the loom to sley and tie on. 

I also have a cross maker and use the AVL for non-sectional warps with lease sticks and a raddle. The comb (mini-reed) does not get in the way of this and keeps the threads organized until the bout is on the lease sticks. After that, it's just like regular warping. 

 

Pushing tool for threading heddles from behind the loom.

 

Kate in Scotland

Tien- I very much appreciate your blog post about the AVL warping wheel. You write clearly and have good ideas. Thanks.

sheepylady (not verified)

I plan on making bouts with the WW and crossmaker, removing them, and dyeing them.  What is the best way to put them back on to wind onto the sectional beam of the loom.

NancyHassel

I use a LeClerc tension box to wind them back onto the loom.  The LeClerc tension box is top-loading so I can drop the threads into the combs and then lift them out when the end is close to the warp beam.  I'll try to take some pictures and post them later in the weekend.

erial2

I like the warping wheel for sectional beam because I don’t have to wind spools. I can use whatever put-up the yarn is in: cones, tubes, even balls.  I can do a mixed warp in a pattern or change the order every section. I have a plain beam and a sectional, almost always use the sectional, even with 80 ends in a 2-inch section it goes on smooth, fast, with constant tension and no tangles, regardless of length. By moving spools I can get warps in multiples of 2, 2 1/2, or 3 yards up to lengths of 30 yards or more. I use the cross maker, I like it better than tape but it’s a matter of preference. 

Submitted by Dawn McCarthy on