Hello! I could use some help with a project. I need to weave a pattern very similar to the pattern I have shown below. It needs to be 3" wide and 65" long. I usually do inkle or tablet weaving but I have been unable to figure out how to do this pattern using all three colors using either of these methods. I thought perhaps tapestry weaving might be the way to go. It has be 10 years since I did any tapestry weaving but I was hoping it might work. Has anyone done any tapestry weaving using an inkle loom? I could use any ideas or suggestions that anyone has to offer. I hate to let down a repeat customer and this gentleman really wants this for his guitar strap. Please help! Thank you so much. Kat

Comments

bolivian warmi

In warp-faced the only thing I can think of that would allow you to make those shapes with three colors is triple color double weave although you would have to use very fine thread to get the curves. I have done it and it makes a lumpy old band as the third color is hidden within the double weave "tube" while the other two colors are being used. Couldn't you just split the red and black down the middle and have one half red and white and the other half black and white? I know it's not what your customer wants but I can imagine that looking quite nice. Then you would be able to do a two-color pick-up.

OR you could do a three-color warp substitution which gives horribly long floats on the back but you could then mount the band on something...a piece of leather or suede perhaps to hide the floats.

Out of curiosity, have you found ready-made guitar strap hardware for 3" straps or do you make your own?

As for tapestry on the inkle loom...wow, it will be interesting to see if someone has tried that. I am guessing you don't have the loom on which you used to do tapestry years ago.

 

 

 

Erica J

If you do decide to go the tapestry route, I would say you can do it on an inkle loom. However, I recommend you actually find a small rigid heddle to use rather than tying with the inkle ties. This allows you to keep the warp threads evenly spaced throughout. If you think you can keep the warp evenly spaced without drawing in so much that the warp shows through, then you could tapestry weave on an inkle loom.

Good luck, I'd love to see the fininshed product,

Erica

tommye scanlin

About using the inkle loom for tapestry... Erica has noted one of the main problems that would arise--keeping the warp evenly spaced throughout so that it will remain weft-faced.  Another potential problem is warps being uneven in tension if the loom is an open-sided inkle loom rather than one with supports on both sides of the bars. The design, as you've shown it, has some curves that would need to have a fairly close warp sett to be as smooth as possible, maybe 10 or more epi.  My thoughts about doing this the size you mentioned in tapestry technique would be to use a strong rigid heddle loom as Erica suggestes, if it has beams on which to wind the warp.  Or to build a copper pipe frame loom, like that shown on Archie Brennan's website, to the size you want--you can make a continuous warp so that the length of the piece could be almost double that of the height of the frame.

As you know, since you've woven tapestry before, the time you'll spend to weave a piece this length will be possibly more than if it were done in a warp-faced way.  It could be quite stunning, though, and worth the time and challenges!

Tommye

tommye scanlin

About using the inkle loom for tapestry... Erica has noted one of the main problems that would arise--keeping the warp evenly spaced throughout so that it will remain weft-faced.  Another potential problem is warps being uneven in tension if the loom is an open-sided inkle loom rather than one with supports on both sides of the bars. The design, as you've shown it, has some curves that would need to have a fairly close warp sett to be as smooth as possible, maybe 10 or more epi.  My thoughts about doing this the size you mentioned in tapestry technique would be to use a strong rigid heddle loom as Erica suggestes, if it has beams on which to wind the warp.  Or to build a copper pipe frame loom, like that shown on Archie Brennan's website, to the size you want--you can make a continuous warp so that the length of the piece could be almost double that of the height of the frame.

As you know, since you've woven tapestry before, the time you'll spend to weave a piece this length will be possibly more than if it were done in a warp-faced way.  It could be quite stunning, though, and worth the time and challenges!

Tommye

Bonnie Inouye (not verified)

Kat, I noticed that you want the finished piece to be 3 inches wide by 65 inches long. If the image shown was woven on a warp that gave it this width, it would be around 10-12 inches long. I think this is why people are suggesting a rigid heddle loom.

For a long band, the method I would consider is tablet weaving for the red and black part with weft brocade for the white part. Some years ago, I took a seminar (during Complex Weavers Seminars) on brocaded tablet bands. We used a gold thread for the brocade. This technique was used in the middle ages and our teacher had done research on historic tablet woven bands. Brocade will slow the process but it allows you to place the white design only where needed. A warp-faced band will be strong and durable as a guitar strap because all the weight is held by the vertical elements of the cloth. If you have some books on tablet weaving, look up brocaded motifs.

Bonnie Inouye

Submitted by Anonymous (not verified) on