... Texsolv heddles? That is the question. I've got my loom all nicely refitted with Texsolv. Can't believe how easy it was compared to traditional cordage. I've got the reed sleyed and am looking at the heddles and wondering whether I should snip them into individual pieces or leave them daisy-chained. My first projects were with traditional hand tied heddles and I liked how I could push units of them back and forth out of the way or into play as I needed. What do you folks do? Cut 'em or leave 'em?

Comments

Joanne Hall

It is easiest to cut the loops between the heddles when they are tied in their bundle, before you put them on the loom.  But now that they are there, just cut them when you want to.  If you thread 4 3 2 1, you may not need to cut them.  But, eventually, they will all be cut, since it is a nuisance when you are threading other weaves.

Joanne

tien (not verified)

I cut them.  It's much easier to transfer them between shafts if they're cut...though it occurs to me now (after the fact!) that cutting them in groups of ten would be handy for counting purposes.

I also find that, with 24 shafts on my loom, often the heddles are spaced too far apart to leave the heddles attached to each other.

Sara von Tresckow

With more than 8 shafts, cutting is best because, as Tien says, you sometimes can't get your hand in comfortably.

For looms with 8 or fewer, I tend to keep them in bundles of 10, 25, 50 or even the original 100. Why? Bundling them to transfer around is easy and doesn't make for a lot of counting.

Also, if you leave them uncut  when you tug on the heddle you just threaded, the next one comes forward. If threading in groups of 4, this is handy - like a heddle dispenser.

I have one loom where I'm using some used cut heddles that came with a used loom purchase. They drive me nuts - always getting tangled, not popping out of their group easily.

You need to look at your loom and how you pland to weave and then decide. Remember, once cut, you can't paste them back together.

laurafry

Like so many other things about weaving it's a personal preference thing.  On my AVL I've cut them apart.  I don't find them to be a problem that way although others may find it annoying.  :}

cheers,

Laura

Ellen (not verified)

I always cut mine. Sooner or later I'll want to seperate them at places where they aren't cut, so now I just cut all of them from day one. When I move them between heddles I tien them together in bundles with little plastic strips.

kerstinfroberg

I cut only when "needed" (that is - if/when I come to a place in the threading when I want to have them separated), which means that my looms have a mix of cut and uncut. The number of cut-apart heddles is slowly increasing, but after 25-30 years there are still many uncut. But then, I never count them either... With a Swedish-style loom (shafts consisting of two separate bars) it is so easy to put on/take off the heddles you need - .

Fitzroy

Thank you all for your input. I made it about 24 heddles before I went slightly nuts and cut them all apart. I don't have the dexterity that developes with new skills  yet to allow me keep them daisy-chained. 

riverdaughter (not verified)

Just brought home a lovely barn frame loom fitted with 200 string heddles. Of course I want to make more. The seller tells me she ordered the #18 seine twine from Camilla Valley but I would prefer not to have to wait for it to come from Canada as this could take weeks. Would like any suggestions on other types of twine that experienced weavers use, where it might be found, and info on why Texsolv heddles are superior to twine. Loving the quiet of weaving without clanking.

riverdaughter (not verified)

Just brought home a lovely barn frame loom fitted with 200 string heddles. Of course I want to make more. The seller tells me she ordered the #18 seine twine from Camilla Valley but I would prefer not to have to wait for it to come from Canada as this could take weeks. Would like any suggestions on other types of twine that experienced weavers use, where it might be found, and info on why Texsolv heddles are superior to twine. Loving the quiet of weaving without clanking.

Sara von Tresckow

Seine twine is pre-stretched and doesn't fuzz, lasts forever and is smooth in the eye. Wait until you get some. There really isn't much else that does a good job.

riverdaughter (not verified)

Thanks Sara!  do you know of a U.S. source?  Thinking the Texsolv would get caught on the wood of the harnesses not to mention it seems so wrong (imho)to put nylon onto a 170-year old loom.

tommye scanlin

...has cotton seine twine of several sizes.  Joanne Hall, owner, is a Weavo member.

Tommye

Sara von Tresckow

Actually, Texsolv is the modern substitution for seine twine string heddles and not at all inappropriate. The material is more durable than natural fibers - I wasn't sure when I began using Texsolv products around 1981, but none of the heddles or cords has ever broken or become abraded or unusable. It mimics the older methods of tying up looms and making heddles pretty exactly.

The product line came out at a time when the traditional cordage for handlooms was hard to find and no longer as durable as in the past.

I sometimes think we get mixed up on "preservation" and "authenticity". If the weavers 170 years ago had had access to Texsolv at an affordable price, I'm sure they would have at least given it a try.

Submitted by Fitzroy on