If anyone has any info about a traditional pinwheel pattern....I need your brain!  I am planning a weaving project using 8/2 cotlin...(8)light/(8)dark...pinwheel pattern...8 shaft.  My issue is what sett do I use...Is this in the twill column [24 sett] or the plain column [18 sett]?  I have the threading, tie-up and treadling...but at a loss for the sett.  I would be grateful for any help...Thanks

Comments

Joanne Hall

If your weave structure is primarily plain weave and you do not have any floats going over more than two threads, then a sett of 24 is good for Swedish cottolin.  I don't know what your thread is since cottonlin is 22/2 and you  wrote 8/2.  For Swedish cottolin, if the structure is mostly floats over two threads, then you could use 28 per inch or even 30 for a stable weave.  What you want to make from it is a variable. 

Joanne

laurafry

Like Joanne says, your density will be determined by your weave structure and the use of your textile.  If you need a denser textile, increase your epi/ppi.  I would choose an epi I thought appropriate, then weave about 4" or so, cut it off and wet finish it before you decide.  If the cloth is too loose increase the epi.  If it's too stiff, decrease the epi.

Cheers,
Laura

jlread (not verified)

This is 8/2 cotlin from Webs.... so I am still at a loss for a sett...if it were 22/2 this wouldn't be a question...is the pinwheel a tabby or twill structure..the pattern is from a booklet by Margaret Windeknecht on page 25..I don't have a 'sample loom' so doing a sample will be difficult..

laurafry

How many yards/pound is the yarn?  If it is around 3360 yards/pound, a set of 20 for plain weave, 24 for twill should be okay.

As for weave structure, look at the tie up and treadling.  Are you weaving plain weave (over/under every thread) or twill (over under 2 threads at a time)?

Cheers,

Laura

lkautio (not verified)

The pinwheel pattern you are interested in is a twill.  The 8/2 cotlin from Webs should work at 22-24 epi.  The end product and how you like it to feel are factors in choosing sett. There is no one correct answer. You don't need a sample loom to do a sample.  Just put a bit extra (a yard is often good) on at the beginning, weave your sample, cut it off and wash it, and see if it does what you like.  If not, resley tighter or looser and try again. 

Laurie Autio

jlread (not verified)

OK....Thanks so much...I think I have my question answered....Your help is appreciated....JR

jlread (not verified)

I have completed a sample of the pinwheel pattern, using Webs 8/2 cotlin....sample posted in my projects and the sett was 24 epi

Threshkin (not verified)

The sample looks very nice.  I look forward to seeing the finished towels!

Erik

sally orgren

I am planning a baby blanket for charity, with donated Lily Brand "Sugar & Cream" 100% cotton crochet yarn. This yarn is typically sold in craft stores in the U.S., 120 yards per skeined ball. (70.9 grams or 2.5 oz units.)

I am a sample QUEEN, but as this was donated, I don't have a yard to spare. I may even need to use a dummy warp to get every last inch out of the supply. I am hoping someone has woven with it before and can tell me a decent sett. Assume plain weave.

On a ruler-wrap, it looked like 9 epi was ideal. (Using a 12 dent reed, that would be 1,0,1,1,1,0,1,1,1,0,1,1, (repeat)

However, 8 or 10 epi would sley (distribute) into a reed more evenly, at one per dent with no spacing, if I used an 8 or 10 dent reed.

I own a variety of reeds, so even if it is an irregular denting, no problem. I want what is best for the final fabric. Advice for this particular yarn? (Much appreciated!)

Sally

TinaHilton (not verified)

I used Peaches & Creme (same type of yarn) at 10 epi in a twill for some mug rugs.  That worked well and it wasn't stiff at all.  I assume you plan to use it for warp and weft?  I would probably use 8 for plain weave.

francorios (not verified)

Sally, I use 8 dent heddles with Sugar n Cream or Peaches n Creme cotton yarns. There is a about 15 percent shrinkage when you wet finish that yarn so the weave tighens up. If you use 10 dent then the cloth may not drape as well after wet finish but the shrinkage will be about 10 percent. That's just my experience with that yarn for plain weave, I haven't tried a twill with it yet. I hope that helps. Have a good day! Franco Rios

roberta.hamilton (not verified)

What sett is best for rep weave using 3/2 pearl cotton?

Thanks,

R

sally orgren

Excellent! Thanks for the recommendations! I took the project to my guild last night with some samples of the yarn, and two of our members had some stray skeins in their stash that they thought might be a match. (thanks Lois and Cathy!) So that helps me bridge the gap in worrying that I will have enough to complete the project. I am leaning toward 8 epi with plain weave, to weave this up fast. And I appreciate the note about 15% shrinkage, as I was planning a worse-case scenario with 20%.

It was a bit of a mathematical puzzle to figure out how to put together a pleasing pattern using exactly the quanitites of the colors I had been given. I am going to post the tentative draft under the draft folder. One of the colors (the red) was so bright compared to the rest of the muted tones, I didn't want to use too much of it. (So that took about 100 yards out of the total stash that was donated, and that needed to be replaced by something more aligned to the majority of colors I received.)

Again, thanks for the speedy reply! I am looking forward to posting the finished blanket as soon as possible.

Bonnie Inouye (not verified)

Sally, you are lucky to have such a fine guild. But I know it is not all luck!  You have worked to improve your guild. Thanks for sharing an example of a way that guild members can help each other.

I had a great time with the Jockey Hollow guild when I taught a workshop there. I know that you belong to more than one guild, so I am curious about the recent assistance. 

Also I want to encourage other weavers to find a guild to join. When I started weaving in the late 1960s, I thought that guilds were like ladies' social clubs (on the basis of just one meeting as a guest) and I did not have time for that. When I eventually joined that guild, I had two small boys and was still very busy, but the weaving and spinning guild was helpful and friendly.

sally orgren

As you guessed, Cathy and Lois are from Jockey Hollow! As usual, I was also prepared when I went to the meeting — I printed out my draft and brought samples of each of the colors I am trying to match when seeking their assistance.

I concur, guilds are *fantastic* resources if you have one nearby. Even if you don't, it might be worth the hour long (or more!) drive for the opportunities they present. 

sally orgren

Our guild just finished a Sarah Saulson workshop, and participants were asked to set up their looms at 12 epi with 3/2. With rep, that is nearly 2x as dense. So a starting guess might be in the range of 20-24 epi?

Two other places to check for more expertise...

-the book Rep Weave and Beyond, by Joanne Tallarovic (Interweave Press)

-send a pm (private message) to "repweaver", who is a member at Weavolution here. Or check her project posts and see what she uses.

 

sally orgren

I am thinking of tying on a second crib blanket to the first, which is currently sett at 8 epi with the Lily crochet cotton. 

For the new blanket, I am thinking of using softball cotton. Do you think I can keep the same sett, or should I tighten it up? In general, softball cotton seems spun a bit softer than the Lily 4ply Sugar & Cream.

Has anyone woven a blanket with the softball cotton, and if so, what sett did you use?

Thanks in advance for your recommendations—

sally orgren

Thank you ALL for the comments on sett for the Lily & Cream. The 8 epi worked out just fine. This crochet yarn has a bit harder hand after washing than I am used to, and I was surprised that it started pilling almost immediately. I used dye magnet sheets in the wash, and was also surprised by the amount of dye the yarn threw off. 

But all-in-all, a successful project that was really fun to weave. Here's the results for you to see! (It wove up in about 2 hours!)

 

Claudia Segal (not verified)

Good things to know about the yarn and the sett.  Knowing you, those observations will be included in the Notes when you add it to your projects.

Thanks for the follow-up.

Claudia

sally orgren

What sett would you recommend for this fiber?

The product is 50-50 cotton/linen from Webs (3,360 ypp) and their recommendation range is 18-24.

I plan to weave Bronson dishtowels, so areas will have spot floats, some grouped floats for a more lacy effect, and some plain weave.

I noticed several site recommendations and project posts have sett this yarn at 20. That sounds loose to me. In general I prefer tighter setts, and as this fabric will be used for dishtowels, I want a strong fabric to last a long time with daily use. Will it be impossible to weave, or will I be disappointed if I sett it at 24?

Please hurry your answer, I want to begin winding tonight!!!

Sally

lkautio (not verified)

Sally, it won't be impossible to weave at 24, it just won't open up as well to give the characteristically lacy effect in the grouped float areas.  If you want a textured, dense cloth rather than a lacy one it will be fine and the higher sett will wear better.  If you want the characteristic lace holes, they will be more visible at 20.

Laurie Autio

alison.addicks (not verified)

Try Ashenhurst's formula outlined in Sharon Alderman's Mastering Weave Structures (also,Allen Fanin's text, the title of which escapes me at the moment.)  I use this formula with every project, and then sample, sample, sample.

sally orgren

I just wanted to follow up. After the posts here, (thank you for weighing in!) I reworked my design for 20 or 24 epi. There were advantages and disadvantages to both. Finally, I decided to put on a short sample and see for myself.

Checking a reed substitution chart, an 8 dent reed allows me to sample all three setts. I wound a quick one (plus) yard narrow warp.

I sleyed 1/3 of the reed at 20 (2,3,etc.), 1/3 at 22 (2,3,3,3,etc.) and 1/3 at 24 (3 per dent). Then I wove off a bit of the pattern.

My next step is to cut off, wash. Then resley the whole sample to the sett I think I like the best. Also, once I select the ideal sett, I can adjust my reed if needed. For instance, I could also use a 12 dent reed with 2 per dent to get 24 epi. When I wash the sample, I will see if any of the setts tend to leave track marks. Sometimes they enhance the fabric but I am not looking for that in this piece. (Another adjustment I made, I am using 8/2 homestead cotton for the warp, the 8/2 cottolin for the weft. Homestead cotton is known to track a bit in plain weave.)

What's great is that by sampling, I am getting ideas on how to tweak the draft further. Also, I wanted pin stripes between the motifs. So while I was at it, I tried some of the warp stripes on separate heddles, some bunched in one heddle, and some spread over two heddles on the same shaft. (I like this last effect a lot, vs. a few threads woven in like the rest of the pattern.) The stripe is more beefy, the color and texture stands out more.

I know these things sound kind of subtle, especially for a dishtowel project, but as I work through this process, I am thinking this is what makes a fabric transform from "good" to "great"!

--

And Laurie, your comment led me to the thought I could vary the setts among the stripes, to accommodate the lace or plain weave areas within one warp. I'll try and post some photos when I get a chance! 

Again, many thanks!

tien (not verified)

Hi Sally,

Keep in mind that it is easier to beat in a narrow sample than a wide one.  How narrow is your sample and how wide is your planned warp?  I recently wove a 12" sample at 40 epi (in 30/2 silk) but had to widen the sett to 36 epi when weaving the 24" wide fabric.

And I think what you're doing is wonderful!  You're taking the time to get the effect you want.  My philosophy is never to compromise quality for speed.  Sampling is great!!

jlread (not verified)

I used that same Webs 8/2 cottolin for a pinwheel pattern and used the sett of 24 epi....worked out great....I used it in the warp and weft though.JR

sally orgren

Tien,

Yes, my sample is narrow (8+ inches) and I am aware things may change when I get to the full width (20+ inches). That's why I like to be aware of my reed choices. I certainly don't mind resleying, it goes pretty quick. (And for the newbies, the more you do it, the faster you get!)

Results are in: The 24 epi worked great (as jlread noted), the floats are well-articulated, but I actually like the feel of the 20 best. Very soft. However, I had The Chef (who will be using these towels) inspect the sample, and he noted immediately the denser the sett, the longer the towels might last. The compromise might be 22. He's tough on kitchen towels. (Did I mention I am making these in brown tones, NOT white?...)

No reed marks or tracking was evident, after washing on a normal machine setting and popped in the dryer for 20 minutes on a cotton setting. I like to wash my samples and handwovens as they will be used. (No swishing in hot water or delicate cycle for these babies!)

I am still estimating the take-up and shrinkage. I did the measurements, just need to do the math. I'm threaded up for at least one more sample, and ready to wind for the big loom next!

Submitted by Anonymous (not verified) on