I just finished weaving napkins at 20 epi for a width of about 22 inches.  In order to weave the matching placemats, I'm supposed to re-sley the reed at 30 epi for use in a rep weave.  I'm still kind of new and am curious:  am I resleying to get a narrower width or because you need to have a tighter sett for a rep weave?  There must be a reason you don't continue by cutting off the edges of the warp you don't need in order to get the correct width.  

Comments

kerstinfroberg

Warp rep is a warp dominant weave, so the sett needs to be closer. A typical (Swedish) rep sett is 36 ends per cm for cotton 16/2, while for 2/2 twill you use 16 ends per cm - so the rep sett is a little more than double.

The idea is that the warp should cover the weft completely. Here are some typical examples from a Swedish blogger.

.

Bonnie Inouye (not verified)

Rep is a good structure for a place mat and it is not a good choice for napkins. This is one of the great things about being a weaver; you can choose the best structure for whatever you want to create. A napkin needs to be flexible and soft and should dry fairly quickly (washed frequently), so a rather thin fabric is best. A place mat needs to be sturdy and rather thick so it can protect the table from a hot plate or moisture from condensation, etc. Rep makes a thick cloth because one of the wefts is very thick. That makes the weaving go quickly. The beauty of rep comes from your choice of warp colors and the way you arrange the colors on the warp because the warp dominates the look of the cloth. You can also make lots of nice designs with rep- you have 2 blocks on 2 shafts, 4 blocks on 4 shafts, etc.

Submitted by Anonymous (not verified) on