i am making upholstery material using 20/2 cotton. i put 5 threads in each dent of a 8 dent reed (40epi), but alas, it isn't what i hoped for. i wanted something like ticking instead i got a very open looking weave using 20/2 for the weft. where did i go wrong? if i re-slued the warp into another reed what size read would i need to get a tighter weave?

Comments

weavinglibrarian (not verified)

Have you sampled and washed your fabric? My guess is that your reed has helped you to produce fabric where the 5 epi is bunched together. Some of that will vanish with washing. I hate to sample, but this is why I do it. Being able to see what I have after washing has made me change a lot of my plans with minimum waste. Try the same sett (40 epi) with a different reed, maybe 10 will help or go to 48epi with a 12. Good luck, patty

spring k (not verified)

alas, i did not sample....and it is bunching as you suggested. this is a HUGE warp (for me) at 1,200+ threads so i have to really be careful on the next step.

lkautio (not verified)

What is your weft, ppi, and structure?

Laurie Autio

spring k (not verified)

plain weave ...about 20ppi w/ 20/2 cotton.

i had no idea 40epi was the same in an 8 dent reed (5 per dent) as it would be in say,a 10 dent reed (4 per dent).

any discussions somewhere about this?

lkautio (not verified)

Try increasing your ppi to at least 30 for upholstery fabric.  40 might be better but take a good wallop with the beater. Use a ruler and check the number of ppi regularly rather than beating to a feel. 

40 ends per inch (epi) is 40 epi whether it is 5/dent in an 8 dent per inch reed or 4/dent in a 10 dent per inch reed.  Multiply the number of dents in an inch by the number of threads in a dent and you can see they are the same.  The difference may come in reed marks (more in a coarser reed) and the ease of packing some warps.  You can find sett charts in any good beginner book (or online) which show the sleys for different reeds to get the same number of epi.

Laurie Autio

 

spring k (not verified)

oh,which reed i use doesn't make a differnce? same epi either way?

hmmmmm....then i was thinking of something with a lot closer sett. i am re-slueying to a 12 dent reed at 4 per dent. and i will really work on beating a 40ppi. thanks for that tip.....

i looked back on my notes and vavstuga's ticking was about 75 epi w/24/2 cotton.

what  would be the differecne between 24/2 cotton and 20/ cotton?

laurafry

8 x 5 = 40

10 x 4 = 40

You can use a number of reeds to get the epi you want.

e.g. if you only have a 12 dent reed, you can sley it 

4/3/3/4/3/3/4/3/3/4/3/3/  and repeat.  This also equals 40

cheers,

Laura

laurafry

The 'count' for cotton is 840.  To figure out how many yards for a cotton yarn, multiply the size of the yarn (20) x 840 and divide by 2 (the number of plies).  20/2 cotton has around 8400 yards per pound.

24/2 cotton would have 24 x 840 = 20,160 divided by 2 = 10,080 (approx.)

cheers,

Laura

lkautio (not verified)

If you go to 48 epi (4x12) you will have a hard time getting 40-48 ppi with 20/2 cotton in plain weave on most hand looms.  Think of it as trying to get a certain density of fibers.  With your initial 40 epi and 20 ppi you were getting an average density roughly equivalent to about 30 epi and 30 ppi.  Your result was warp faced (epi>>ppi) rather than balanced (equal warp and weft, epi=ppi).  A balanced 30 and 30 is a fairly open plain weave, good sett for lace, but not that durable for upholstery.  A balanced 36 epi and 36 ppi is better for upholstery, but could go higher. Try a few samples, working to different ppi for each at the same epi.  Wash and dry, and see what you like.  At 48 epi you might try 20 ppi, 30 ppi, 40 ppi, and 48 ppi.  If you want a warp-faced or warp-dominant upholstery fabric then you might even want 60 epi with at least 20-30 ppi. At 75 epi, the 24/2 Vav Stuga fabric was probably not woven balanced in plain weave - check the ppi.  Also, ticking can be woven in simple twills, which would then take a higher ppi and epi.

Laurie Autio

lkautio (not verified)

The equivalent sett of a 20/2 cotton to the 75 epi for 24/2 cotton would be about 68 epi. One then needs to make the same conversion for the ppi.

Laurie Autio

Sara von Tresckow

Ticking is usually a twill(often 3/1) or satin. Plain weave cannot give you the firmness you desire. 40 epi for 3/1 twill or satin is not too close.

Also, be aware that most commercial fabric is not "balanced" but slightly warp dominant. If you stick with 40 epi, something between 33 and 38 ppi would be expected.

Also, elements such as the amount of twist in your yarn, whether mercerized or unmercerized, staple length, finish (limp or firm) will incluence your finished fabric.

Submitted by Anonymous (not verified) on