I'm seeking a little advice here. I'm considering buying a new loom.  I'm seriously constricted by space so would like one that folds.  I've been looking at the Schact wolf looms.  I'd like something in the 30" wide range.  I've only ever had a rigid heddle but I've done a lot on it with two heddles, pick up sticks, etc.  Naturally I don't want to spend a fortune as I do most of my indoor hobbies in the winter so I don't want to feel guilty if it sits idle for a while!  I don't care if it's used or new.  Any opinions would be appreciated.

Comments

Artistry

Hi Buckyscheerio, I have 2 Baby Wolf Schacht Looms weaving width 26 inches. It may be a little small for you but it does fold up very nicely and fits in the corner of my studio or in the back of my van and CRV when traveling. I have 8 shafts on both of them and a stroller on one. I really recommend the stroller ( it has wheels) for ease of moving around. One of mine is about 25 years old I think. I've made almost everything on it. I do not think you could make a rug on it because I don't think you'd be able to get the tension high enough plus the beater is not heavy. In spite of that I've found them to be great little looms, easy to warp and tie up. Plus they are portable if you want to take it to a workshop, I have no problem some people need a helping hand. Good luck! Cathie Before you buy any loom see if you can try it out !

sandra.eberhar…

What do you want to weave?  The Baby Wolf is a nice small loom for light work, but as said, won't do rugs.  Kessinich makes folding looms in several sizes that, although they are jack looms, can do rugs.   A Louet David will also fold and is a jack loom.  

buckyscheerio

I came across a local  really good deal on a Kessenich 36" floor loom.  We were able to pick it up (heavy!) and bring it home.  After major furniture moving it has a new home.  I have never used a floor loom.  I have done a lot on simple looms, rigid heddle with two heddles, tapestry, peg, inkle, etc. This loom has a sectional beam.  Does this mean I don't need a raddle for back to front warping?  Not entirely sure what a sectional beam is for.  While I don't care for the math involved I do like figuring things out so I'm looking forward to experimenting on it!  I've got a couple of books on hold at the library so I can decide which ones to buy.  Any suggestions?  Thanks!

laurafry

You might consider Janet Dawsons class on Craftsy. She will get you started with the basics. Cheers Laura

theresasc

I have and have had quite a few (I am down to 5 at this time).  You can unscrew the sectional rakes, turn them over, screw them back down and use the back beam as a plain beam.  Once you have them turned, loop a number of cords over the axel and bring it out between the rakes and add a warp stick to tie on to and away you go.  I used one of the sectionals when I had it off the loom as a pattern to make my raddle.  Just need a length of 1x2 and nails and you have a raddle.  I hope your Kessenich gives you years of enjoyment - I love them.

As a further note:  there are 2 wooden caps on the top of the castle.  If you remove them you will see the pulley system for the jacks.  Squirt a little bit of sewing machine oil into the cams on both sides of the loom and then work the treadles.  It will help free everything up and keep the loom operating smoothly.  There are also oil holes along the side of the castle - squirt a little in there as well.  When you do this, place rags on the floor in case any oil runs.  Any other question on Kessenich looms, just ask, I will be more than happy to help if I can.

buckyscheerio

Thanks to you both, you've been really helpful!  Funny thing, the sectional rakes are turned to the inside now.  I thought it was to keep them from being broken off when moving but there is a stick to tie on on it already - duh. I'll check out Craftsy and dig out my oil!  I also want to pick up a 3' wide bamboo reed window blind.  I use a 2' one on my rigid heddle and it's worlds better than using paper, keeps things nice and even.

Ludmilla (not verified)

I would recommend you consider the Leclerc Compact. It is an X frame loom that folds up. I have the 8 shaft version. It was less expensive than the baby wolf when I purchased mine.

Sara von Tresckow

There is the 32" Lilla from Oxaback - an 8 shaft/8 treadle countermarche with folding back beam that makes it about 28" when folded so it will fit through larger interior doors. Great weaving capability and the loom is not much wider than the weaving width.

Details here:

http://woolgatherers.com/Lillapage.htm

mneligh

Harrisville at least made (and maybe still makes) a folding loom . . .

Macomber's CP folds much like a Baby Wolf.  In addition, both the front and back beams on the B-type Macombers (the big massive ones) fold, giving you a very small footprint for a big loom. My 20-shaft, 48" loom takes up mo more space than an upright piano, and those without the big sectional beam and fewer shafts take up less.

buckyscheerio

Thanks so much for the Craftsy suggestion.  I'm in the midst of Janet Dawson's classes and have found them really helpful and easy to understand.  I'd reccommend them to anyone wether you have any experience weaving or not.

Submitted by buckyscheerio on