Does anyone have a sectional beam on their floor loom? Is it the staple section type? If so , do you know, or could you measure the gauge of the wire staples( thickness of the wire).  Or even better, has anyone built their own sectional warping beam?  Where do you get the heavy wire staples used to make the sections?............Steve

Comments

jordanj (not verified)

 Steve, 

The only thing I have available to measure circumference of something small like that is a knitting needle gauge and the circumference of the wire on my AVL sectional warp beam is 3.25mm. Sorry, but I don't know how that translates to wire sizes.

HTH,

Jennifer

steve104c (not verified)

Jennifer, That is good info. Thanks. I talked to Joanne @ Glimakra and she sells the loops for $ .60 ea. That is not a bad price and I know I'll be getting the correct size. So I ordered 182 of them. I'm making my own sectional warp beam attachment. Thanks again for the info.

ReedGuy

I'm using 1/8 SS and building mine to. I'm also thinking of a way to weave the last yard with the tie-on cord. I should be able to just retract the cord from the opposite beam cord holes and use a rod secured to the beam with curved slots on the ends to tie the warp ends on. Doesn't look to be that challenging. When you reach the rod after you've weaved all the beamed warp, just remove it and wind the rolelr to tension up the warp again. Simple stuff. :) The only reason I'm making one is because I have plans for fine yarn. I already have the rod and wood, so it's just looking for a project to put it to use. ;) I'll make a tension box to and just order the combs for the threads. I have a counter that works from an old busted string box. :)

Submitted by Anonymous (not verified) on