Hi,  I have a four shaft counterbalance floor loom (approx 42") of unknown origin which I picked up second hand.  It works well, but now I want to make a rug with a pile! I have the relevant copy of Handwoven but what I don't have is a secondary warp beam.  Does any one have a picture/plan/suggestions for a secondary warp beam that I can make for my machine.

Comments

Artistry

Hi I find myself in exactly the same place! Except I will be doing seersucker with different tensions( vs. Different fibers shrinking) last ime I did a pile weave I weighted the second warp with milk jugs partially filled with water. Just tie the warp through the handle. With that said this is cumbersome since every time the warp is advanced the tension needs to be released which requires putting the jugs up on a bench, or something. It did work but slows the process down. I will be very interested if someone has a better idea!

Sara von Tresckow

Actually, weighting that pile or secondary warp is probably just as efficient as a second warp beam.

Rermember, when you advance with two beams - each one needs adjusting, and the tension on each may not be the same. With the weighted pile warp, the takeup will be as needed.

Submitted by Embroiderr on