I just got a new to me Harrisville 22" 4H/4T loom.  It had been stored in a garage for a long time and the leather cord used for the harnesses is very dried and I am worried about dry rot.  Has anyone else had this issue and what have you used to replace the leather cord?  I am going to be using this loom for a class in a few weeks and need to have it operational so I can do my sample for the class. Has anyone used Texsolv as the cording--it is strong and I can match the exact length for all 4 harnesses.  Or should I just break down and call Harrisville and see about ordering new cording and hope I get it quick enough to get it all ready for the class and the prep work?   All thoughts appreciated.

PS  I am in Delaware and have no LYS to get these kind of supplies so it would all be mail order/internet...

Comments

sewwhatsports (not verified)

Thanks Steve for the help.  Where would I find these materials--some place like Wal-Mart or do I need a more specialized store?

steve104c (not verified)

Go to your nearest sportings goods store, or fishing shop. Walmart does not carry it here. Look for nylon coated steel wire, I used 80 lb, but 120lb would be better. Also get wire leader connector sleeves. Crimp the two end sleeves but do not crimp the middle sleeve. This will let you adjust the wire to level the harnesses. After you install, slide the middle sleeve tight when you get the harnesses level. Good luck.........Steve. If you have any other question, just ask.

Dawn McCarthy

TEXSOLV!  I have used texsolv cord on all 3 Harrisville looms I owned and also converted the looms where I teach. Its adjustable, easy to install and very strong.  No crimping required!  You can order texsolv from Joanne @ Glimakra, WEBS or various other online stores.  It works really well!  and much more cost effective!

 

Dawn

bloominloom-dawnmccarthy.blogspot.com

loomroomcat (not verified)

I have bought coated wire cable at home depot.  It can be purchased for about 15 cents per foot.  Only bad thing is, it is green, but works great.  YOu can probably use the copper crimps from the leather cables

steve104c (not verified)

It cost me less than $5. for the wire and the sleeves. You can crimp the sleeves with regular pliers.

steve104c (not verified)

I looked at Home Depot. I believe the wire  loomroomcat is talking about is too thick. The fishing wire is very strong, smaller dia. and very flexable. Did your loom come with the small chains w/S hooks? If you make the wires all the same length, you will use the small chains to adjust the height of the harnesses. If you don't have the small chains, I can send a picture of one and where they go on your loom. You can find the small chain at your local hardware store.

loomroomcat (not verified)

I have used the wire from Home Depot on 6 or so looms, it is the same size as HD sells, it is just green.  I believe it is 1/16" size.  The fishing cable would probably work just fine too.  Home depot is just so handy.  Best of luck!

sewwhatsports (not verified)

Thanks to all who have been so generous with their advice.  I had some Texsov cord at home and tried it last night and it worked.  I have to go to Home Depot this morning for replacement metal rods for the loom so I am going to look at the coated wire cable there just as a backup.  I appreciate everyones help with this issue. Weavolution people are great!!

steve104c (not verified)

Sewwhatsports, I have a 4/6 Harrisville. I made some modifications that you might be interested in. If you send me your email(PM), I can send you pictures of all the mod. My pullies were sticking and I added a spacer on the top of the castle because the cross pieces were slightly bowed. I replaced most of the screws with bolts and nuts and replaced nuts with locking nuts.I replaced wing nuts with plastic knobs. I used steel wool on the warp beam rod and fabric beam rod and they came clean. You amy not need to replace your steel rods...........Steve.

Michael White

I am going to add my two cents to this discussion. Cheryl learned to weave on a 22 inch 4H Harrisville loom some 33 years ago. 32 years ago I build her a copy of this loom. I used nylon cord for both the treadles and the lams. In 33 years I only replaced the cords once. This looms have been to hundreds of schools and fairs.

needles4ewe (not verified)

Could you please send me photos of the modifications you made?  I recently acquired one of these looms.  Have any of you upgraded to the 6 treadles or are you oK with the 4?

thanks.

Linda

Submitted by Anonymous (not verified) on