After a 15 yr hiatus, I am returning to weaving! 

My first problem is that my Inca bobbin winder's belt is old and cracked, and the bobbin keeps slipping.  Right now its got some tied together rubber bands, but its not smooth.  Can you help me past this small bump on my path back to weaving!

Leslie

Comments

Sun, 03/31/2013 - 02:01

Michael White

Can you show a picture of your winder and what type of belt it uses. michael
Sun, 03/31/2013 - 16:04

Queezle

I'm still figuring out how to do things here, but here is a bit more info. The existing belt, when stretched slightly, is 11 inches.  The distance between the spindle of the bobbin holder and the center of the part you crank to wind is 5 inches.  The larger wheel that is hand cranked has a diameter of 5 3/4 inches.  The belt itself is square (not flat).  Thanks for your help.

bobbin winder needing belt

Sun, 03/31/2013 - 16:27

sarahnopp (not verified)

That looks just like a Schacht winder, to my eye. You might look to see what size their replacement belts are.

Sun, 03/31/2013 - 17:16

Queezle

This is such a nice community - I look forward to becoming an active participant.

Sun, 03/31/2013 - 19:35

mneligh

I've had the Woolery make custom belts

Mon, 04/01/2013 - 00:26

sarahnopp (not verified)

Aren't the belts just O-rings? Maybe you can ask at a hardware shop where you might find an O-ring that size. Maybe an automotive shop? I would bring the winder with me :) 

Mon, 04/01/2013 - 00:45

Michael White

I have belts that will fit this for $2.50 plus shipping PM me your address. Michael