My first attempt to use rayon boucle.  It may be the last time I use it.  Just measuring the warp was a real trick.  It kept sliding and slipping and stretching and tangling.  Now I have my warp.  I was just going to weave a plain weave scarf set at 12 dpi.  Should I increase my dpi?  It seems to fit my 12 dent reed without being too snug.  What other problems am I going to encounter?  Also, should I twist the fringe or not?  Will it ravel?  Kate

Comments

sarahnopp (not verified)

I am just planing out a project with some mystery rayon boucle, so I am curious to see what kinds of issues you will come across. This is for a brown bag mystery challenge, and it included more than the boucle, so I may use something else for warp.

laurafry

Rayon is slithery so best used when wound onto spools or cones rather than balls. Since I don't know the yarn you are using I can't comment on the epi but if it is that slippery a higher epi/ppi might be a good idea. You['ll have to use your judgement on that.Yes, twisting or braiding the fringe for any rayon (regenerated cellulose) yarn is a good idea.Wet finish with warm water and give it a hard press for a little additional stability.cheers,Laura

Katelister

Laura,

     Thanks for the advice.  Does 1040yds/lb. sound right to you?  I bought a skein from an artist/weaver who paints/dyes her own yarn.  Yes, I did have to put it into a "cake" (ball)---what a mess.  Now I am thinking maybe 15 dpi would be better.  I have an 8 dent reed and could sley two per dent.  Would that be o.k.?  I don't want to make an expensive mistake.  Kate

laurafry

Hi Kate,I am not familiar with the yarn so can't really say. If you did a wrap around a ruler and came up with 12 for plain weave, I might go to 16 for a twill. Or 16 with a finer, thin weft in plain weave. The only way to know for *sure* what your results will be is to weave a sample. If you don't want to do that, then make a slightly longer warp, weave a few inches at 12 epi, cut it off and wet finish it to see if you like it. If it is too loose, re-sley to 16 (2 per dent in the 8 dent reed) and try again. There are just so many different yarns it is impossible for one weaver to have tried everything. (Well ok, not impossible maybe, but very expensive! :^) ) Don't be afraid of making 'mistakes'. Sometimes things don't turn out quite like we thought they would and we call then 'mistakes', but really they are just results and may be fine. If they truly are a 'mistake' then we know not to do that again. Which is why new weavers are always advised to keep good notes and record what they have done with a sample of the yarn used and maybe even a bit of the actual cloth (the header can be good for this). Above all, enjoy! cheers, Laura

sally orgren

Although a crude method, I sometimes do a small needle weaving to see if I am in the ball park for thread combinations and sett. That entails winding the intended warp around a narrow piece of cardboard, and using a needle to simulate the structure, (a plain and a twill weave), with the intended weft.

Rayon may pack in tighter than expected, and still have a lovely drape. It also might feel a bit "heavy" when finished, as tencel can when sett densely. There is also the "silky" vs "plastic" feel of a finished rayon fabric.

The needle weaving will only get you so far. The kind of detailed information "real" sampling on the loom will give you is invaluable as you go forward.

If you sample, please share your results! You may help the next weaver who tries weaving with rayon to have a more successful experience.

Submitted by Katelister on