There is a loom for sale on ebay in the uk (http://www.ebay.co.uk/itm/VINTAGE-4-SHAFT-SOLID-WOOD-FLOOR-LOOM-ACCESSORIES-/230780431172?pt=UK_Crafts_OtherCrafts_Spinning_Weaving&hash=item35bb95eb44 ). It looks very similar to the one I have got to put together (next month I hope). Now I have looked at it I can see that the treddles (the foot things) on photo 4 are attached to the front of the loom. Is this usual? I dont seem to have a piece of wood in that position as a cross bar = but it is a couple of months since I was able to look at the pieces.ANy comments would be appreciated.Paulps I have stained one of the walls of my shed and finished the floor. Only three sides and the roof to do.

Comments

kerstinfroberg

In Sweden, treadles attached at the frost is often a sign of age. (*often* - not always!). All "modern" (maybe I mean factory-made) Swe looms have the treadles attached at the back. Hopefully it will be clear when you have laid out all the pieces. (Look for marks - all older Swe looms I have known have had some kind of marks carved, or stamped, or written, to show which end is which/goes where)

Ellen (not verified)

To me it looks as if somebody put that loom together wrong! I think the bar where the treadles are attached should have been on the back of the loom. On mine the two bars are the same in size and (ehm pardon my lack of the right words here!) fitting wedges,- except for the thing to attach the treadles to.

Joanne Hall

If you look closely at the photo of the treadles, you will see a set of treadle cord holes more centrally located on the treadle, so it looks as though someone put new holes in the treadles in order to attach the treadles at the front.  So, they most likely should be attached at the back.

Another photo shows a serious problem with the upright, where the post has lost a big chunck of wood at the top.  This is where Swedish looms have the re-inforcing bolt to avoid this problem.

Joanne

paulz

Knowing what I am like at things I will probably need re-inforcing bolts. Has anyone got a photo please? If not do I just drill through and bolt it with something like coach bolts?Many thanks for all info.Paul

Submitted by paulz on