Help- I finished warping my loom, and found two loose warp threads. They made it through the reed- but skipped the heddles. There are empty heddles to either side, but if I don't correct the heddle pattern (1-2-3-4 for plain weave) won't it show up in the weave (i.e. 1-2-3-4-3-1-2-3-4)? Should I rethread all the remaining heddles?

Thanks for any help-

Comments

Queezle

I have certainly done this!

The question is the pattern.  Do the threaded warps complete the pattern?  If yes, then I guess you have two choices.  One would be to simply eliminate the two threads (hang them over the back).  The downside with this is that there will be two spots where the warp is less dense than the rest.  Wet finishing might hide this problem, depending on the fiber, the sett, etc.  The other option is to find the least labor-intensive way to pull out the threads on one side, and rethread.  When I have done this, I went ahead and pulled out the threads to one side from the reed and heddles, finding the side with the fewest threads to re-do. 

Alternatively, if the loose threads were accounted for when threading the heddles for the pattern (i.e. the warp minus the missed heddles has gaps in the pattern), you could tie up a make-shift heddle, or simply put it through a spare heddle if its in the correct position.  In my early days of weaving, I did this so often I purchased repair heddles - metal heddles that open on the ends to slip on the heddle bars. 

Good luck - and let us know how you make out.

Gone

Agreed. Repair heddles are a sanity saver!

TinaHilton (not verified)

If you threaded the heddles correctly and just have 2 extra ends, I would resley.

Erica J

It sounds like you have the heddles you need right there. So the solution is quite simole, just tie the threads loosely to the heddles eye of the correct heddle, easy peasy.

Submitted by jajones on