My name is Paul and I am writing this for my girlfriend who is a weaver at uni in London. Her george wood dobby loom has broke after she has wove 40cm and we are looking for anyone who could help. The problem is its not picking up the shafts. Please respond with contacts for repairs. The university have left her a little in the lurch and she is worried it cant be fixed? she has a dead line and this is for a final project so time is of the essence. any help would be fantastic. Thank you weavers

Comments

laurafry

I'm not familiar with a George Woods loom but might it be that a cable has broken?

cheers,

Laura

Dawn McCarthy

George Woods are a little different from the AVL style dobbys, take a long look at the mechanics, most weavers can identify how the loom works and what the problem is, hopefully it can be resolved with a trip to the hardware store, try Manchester Metropolitan University, they may have info on these looms (they have a great textile dept) and hopefully they still have an on site technician.  Also as Michael suggested the local guilds.

Good luck!

Dawn

http://bloominloom.wordpress.com

 

Dawn McCarthy

Is the loom a computerized dobby?  It could be the connection between computer and box, it could be a bad wire, solenoid or a number of things!  Is the port showing up on the computer?  If it seems the loom and computer are communicating it could be solenoids.

If it is mechanical - you should be able to locate the source of problem by climbing up to the dobby mount and checking wires are on track, the lags are not getting stuck etc.  

Dawn

Andrew Kieran (not verified)

hello.

I'm a student at Heriot Watt in Galashiels. We have about 20 of these things, in various states of repair

I read your message and I might be able to help if i can see some photos of the loom, or preferably video of the lifting box while the loom is working

off the top of my head i can think of a number of things that could be happening. first you have to understand the mechanical function of the loom (all this is assuming that the loom is mechanical and not using a computerised dobby, in which case i probably can't help).

when the weaver presses down on the pedal, the lifting bar is raised. Now, each shaft of the loom is attached to a hook contained in the lifting box. each of these hooks is in turn horizontally attached to a metal plate. each of these plates can be pushed forward by a peg which is attached to a lag which is on a barrel which rotates round each time the weaver releases the pedal (there is a downward pointing hook which rotates the barrel one step, thus turning the lagchain once and putting the next lag in place.

a lag is a little wooden bar, with 16 holes in it (or more, depending on the loom). You program the loom by hammering pegs into these lags.

 

now, what could be wrong?

firstly, if the shafts are failing to lift only on a certain step of the weaving then it could be that some pegs have fallen out. alternatively, it could be that the lag chain is loose, in which case it needs to be tightened because loose lagchains can bend when they get turned into position.

secondly, if the shafts aren't lifting at all, then there are a few thing which could be wrong. firstly, the plates which i mentioned (that the pegs push against, which should be on the right hand side of the lifting box) could have slipped out of place.

secondly, the vertical wire to which the hook is attached could have turned itself backwards (this happens occasionally on poorly maintained looms, in my experience they're all poorly maintained) which would prevent the hook from being lifted by the lifting bar.

thirdly, the wires which leads out of the lifting box could have become twisted about themselves.

These are the most common faults.

it occurs to me as well that sometimes when using 16 shafts, the back of the barrel can lift up causing the back shafts to fail to lift. in this case, you should find that there are a couple of holes on either side of the barrel rest, which you should be able to put nails through to hold the thing in place.

I hope this helps. Like a previous poster said, assuming it's a mechanical dobby it's a reasonably simple mechanism. I understand some people don't have good mechanical sense, but generally i find i can find any faults in any loom i'm using by getting someone else to pump the pedal (or hold it down) while i watch the operation of the lifting box from one side, from the other, and then from standing up on the loom and peering inside.

it's such an amazing coincidence that i logged on today, i haven't been on this site in months

andrew

 

paul brabin

Thank you all for your inputs, i have passed them on. Hopefully there is someone coming in today to fix it, if they cant we will use the advice from here. Thank you all once again for your time and i'll keep in informed.

Mymicahbear

I have a loomcraft loom that must have a part missing. When I am sitting at the loom and use the foot lever to release the warp beam to advance the warp, the beam spins and unravels my warp, there doesn't seem to be any way to make the pawl catch again. This can't be correct. Anyone know what I need to do to fix this, or must I always stand at the back of the loom and let the ratchet wheel release a couple of notches and then go back to the front to take up the slack?

Michael White

of your brake? That would help.

Michael

Submitted by paul brabin on