Hello, I am new to looming and wonder about setting up my first project. I have a loom with 4 "shafts", or frames that hold the heddles. My first project is a plain interlock weave (no pattern and just one color). Can I use just 2 shafts instead of all 4? I am interested in getting as tight a weave as possible with approximately 16 threads per inch. Also, is there a technique for keeping the sides as even as possible as I create the piece? Thank you, any and all help is appreciated. I can't wait to get started.

Comments

Threshkin (not verified)

Kari,

 

Yes you can use just two shafts but most people would use four.  Thread the shafts 1,2,3,4,1,2,3,4 etc and then lift shafts 1 and 3 then 2 and 4 for plain weave.

Straight selvages are a matter of keeping even tension on tor weft yarn, if it is too tight the selvage will draw in and if too loose you will get a loop on the side.  even tension = even selvages.

The number of ends per inch (EPI) you need depends on the size of the yarn you are using.  The quick way to find out EPI is to wrap your yarn around a ruler with each wrap just touching the one before, not pushed tightly together.  Count the number of wraps in an inch and divide that number by 2.  This will give you a good approximate EPI for plain weave.

Go to your local library and see what books they have on weaving (not looming BTW).  Learning to Weave is one of the best books to start with but there are many others that will help you get started.

Enjoy!  Erik

karilou (not verified)

Thank you, Erik for the great advice. I found the book Learning to Weave at a local used book store. It looks like a great resource. Thanks again, Kari

Submitted by Anonymous (not verified) on