Hi,

I'm putting together an old 40" Norwood cherry loom. (not a workshop loom) Most of it I have figured out, but I'm not sure about the brake system, or if maybe there is a part missing. From the brake pedal there is a thin metal rod which I can see should attach to the ratchet brake. It has a cottar pin at the end of it and the pawl for the brake has a tiny hole in the end of it, but it doesn't appear that the two should connect to each other. Can anyone who has a Norwood like this help me out?  

Also, some of the old lam cords are present but quite old. They seem sturdy enough, but I will need more of them and will need to replace the treadle cords, which were cut off when they took the loom apart years ago. What kind of cording should I use for them?

Thanks! 

Comments

dizzylizzy (not verified)

I think I may have solved both problems. I used texsolve for the treadles-- whoever invented it, bless them. I put the little cottar pin into the brake thing and it's sticking enough to release the brake, so maybe all is well. I've never done sectional warping, so here goes another first.

Submitted by Anonymous (not verified) on