I am a grad student in fibers looking for an 8 harness floor loom (preferably used) for home. I will be using various types of yarn and possibly wire at times for experimentation. I will do Theo Moorman, light tapestry work, small sculptural items that I can weave and form off loom, and home projects like pillows, scarves, etc. At school I have access to a Varpapuu 40" as well as 40" jack looms. The issue is my back and shoulder. I have scoliosis and a right shoulder that acts up on occasion. On the jack looms the weight aggravates my lower back and shoulders. Tying up the Varpapuu has proven to be nightmarish because of the way I have to crawl into it and lean so I haven't tested it yet. In fact I'll post another with those questions. I thought all this pain was a part of dressing looms and weaving but now believe that there may be better looms out there for me. I have been looking at Louet David and Oxaback Lilla (or other suggestion) and would appreciate some advice. 

  1. How would they handle tapestry? 
  2. How far forward is my arm length reach? Ie. Would I be reaching further forward with the David? 
  3. Would the overhead vs. sliding beater make a difference for shoulder pain? 
  4. I'm 5' 7 and have long legs and short waist. Would one be better than the other for that? 
  5. I'm used to weaving quickly on a jack loom. Is there a difference with the speed between the two?
  6. How many yards of fabric could I roll onto each? I read that the David was only a few yards. 
  7. How close can I get for threading? Am having to lean in for tie up underneath?
  8. For Theo Moorman, I thought it might be nice to have an extra beam since the threads are so fine and it seems like only the David has that.
  9. Pros and cons people have noticed with either.
  10. I'd be open to another loom as well but don't have space for a huge one.

Thanks!

Michelle

Comments

Joanne Hall

These  things will be important to you.

The overhead beater on a tall loom will be easier on your shoulder.  It is a more normal position for your hand and arm.   I have a similar problem and I can no longer weave on a loom with a lower beater.  Remember that if the beater sides are tall, when the loom is tall, there is less turning in the motion.

You need a breast beam height of at least 34 inches if most of your height is in your body.  If you have long legs, you will need a taller breast beam.

And, at 5'3", when I weave on a loom with a lower breast beam height, my knees push against the cloth beam.  That makes it impossible to get close enough to the loom to prevent a back ache.  So, sitting at a loom is very important to check on leg space.  A knee beam is helpful to get the cloth up off your knees.

For doing the tie-up, put blocks under the legs of the loom to raise it up.  This gives you more space to get comfortable.  Four shaft weaves usually do not require much time changing the tie-up, but if you want to weave with more, you can always take the lamms out of the loom to put the treadle cords in place.  It is usually easy to put the lamms back on and then you just need to attach the cord to the treadles.

Joanne

 

 

Joanne Hall

A weaver wrote to me telling me about her loom conversion.  She had purchased a Leclerc Colonial loom as an 8 shaft jack loom.  She made new, light weight shafts, added a second set of lamms and that converted it to a countermarch.  She said it worked soooooo much better.

In my comment above, I was assuming that you would look for a countermarch loom as the easy treadling and comfort would be better for you.  It can be hard to find one, so this conversion came to mind.

Joanne

tanze26

I hadn't thought about the breast beam height but at school I have hit my knees on the apron so that is definitely good to keep in mind. I'll consider the conversion if I don't find a good CM loom.

Thanks for your input!

Michelle

sandra.eberhar…

If you find crawling under a loom to tie it up challenging (it's not going to get easier as you age), you may want to consider making the investment into an electronic loom (to tie it up, you open a new file on the laptop), or a countermarche loom with a 20+ (Woolhouse Tools).  20+ moves the tie up to be back of the loom.

pattyp

I own and have owned and woven on Swedish looms leclerc and saori jack looms and the  Louet David both with the hanging beater and the new sliding beater.

In my experience and I also am 5'7 with scoliosis, the easiest and quickest loom to treadle and tie up was by far the Louet David.  What took days to get my sheds correct on my CM Ideal, took minutes to tie up on the David.  I wove an 8 shaft waffle weave project on David where one tie up was to depress 7 shafts on one treadle and the loom did it easily and without effort.

The  breast beam on the David is removable for warping, it is easy to get "inside" this loom to thread heddles and the reed.

I am not familiar with tapestry weaving so I cannot comment on the depth needed for it on this loom.

My personal preference is for a hanging or standing beater, but the sliding beater on the David was very easy to use.  My 70cm had a hanging beater, the 90cm had the new sliding beater.

What weaving width are you interested in?  Another loom that costs less than the David and Oxabeck is the Glimakra Julia at 70cm.  She weaves like a full size swedish loom, has a smaller footprint and costs less.

Glimakra has  improved the beater on the Julia and added a footrest to the looms built in 2015, so you have full weaving width of the reed and my suggestion is to add rubber feet to the legs.  Doing this makes for a very stable loom.  

The Julia is no lighter than a David loom of the same size.  If the David did not have rubber feet it would also walk.  The Julia can be placed up on a table with 2 persons to do tieups.  You can't do that easily with many other looms available.  

The Julia is a "deep" loom, deeper than the David and you could easily weave tapestry on her.  The beater can also be moved back so you do not have to advance the warp as much, the same as with the Glimakra Standard and Ideal. 

The Julia has a metal warp and fabric beam, so you could warp and weave with metal yarns should you want to do that, but she does not have a second back beam like the David does. The Julia also holds tension just as well as her big sisters other swedish looms.  Comes in both a CB and CM.  I recommend the CM. 

Good luck in your decision.  If you can at all possible, try before you buy. All these looms are expensive whether new or second hand and nothing is more disappointing to buy a loom and it isn't what you thought it would be.   

 

 

 

 

tanze26

These are all very good suggestions. I'm curious if anyone can explain the leg movement on the countermarch. I weave with two feet over pedals at all times on jack looms so would the countermarch require me to weave with one foot over and one foot resting? Any idea whether the David loom would be easier on the mid back since I don't need to lift my legs vertically as much as with the countermarch? 

ShawnC

I have back and neck problems and will sell my 40 inch Varpapuu Finlandia. While I love it otherwise, I cannot climb into it to thread, etc. I use my Berga Savonia almost exclusively (similar to the Toika Eeva or Glimakra Standard). While I understand the attraction of the smaller countermarch looms, I just cannot warp without pain on these smaller looms-even table looms. My Berga was CB when I bought it and I love it for weaving on 4 shafts, but just added a Glimakra vertical CM system for multi shaft weaves. I do see a 20+ system in my future, as i love to change tie ups frequently.

Submitted by tanze26 on