A 45" Tissart tapesty loom came home yesterday.  I was able to put it all back together, and today I have successfully warped it up.  It is a unique experience, warping back-to-front only vertically.  Gravity was not my friend:-)  I have seen on other posts that weavers have just tied on to existing warps and now I can see why.  It was very strange standing on a step stool and threading and sleying downward.  The advantage was that as I threaded each end, I then sleyed it.  It is a big advantage to weaving to have the treadles and cloth and warp beams with breaks for maintaining tension.  I think that I am going to be very happy with my new loom.

 

Comments

Artistry

Congrats theresasc! It's wonderful to have a new tapestry loom! 45 in. Is a good size, you'll be able to do many tapestries on that. I have heard nothing but good things about the Tissart. Have fun!

theresasc

I have looked at your projects and have admired your tapestries.  Maybe someday I will be able to post some pictures that are as nice as yours!

Theresa

ReedGuy

Whatcha gonna weave now? :)

Is there a term used for making a tapestry, or is 'weaving' the term?

Artistry

Yes! What's your project? Now that you have it warped :) thanks for your kind words . Cathie ReedGuy, weaving is the right term, so is unweaving:)

tommye scanlin

I know you'll enjoy using the loom; I've had a Tissart since 1988.  It was a previously owned loom that I purchased from a lady who was moving into assisted living.  I have other tapestry looms as well as this one but I use this one every day (I have my tapestry diary as an ongoing piece on this particular loom).  The loom and I have woven lots of tapestries (and unwoven a bit, too, Cathie!) over the past two decades +.  

One of the things that's good about this loom is that it's a Leclerc--so anything that might be needed as update/replacement is easily available.  I've replaced a few things through the years on my loom.

About the threading issue... yes, it's different than with a floor loom but once you've gotten the hang of it, it flows very smoothly.  Sounds like you've figured out a way that works well for you.  I've warped it from the warp beam, down... as you've described.  I've also warped from bottom to top--by unhooking the beater bracket so that the beater sits at the lowest point.  I've sleyed the reed (putting cross sticks through the warp chain(s) and wrapping the warp chain around the lower beam to keep ends from slipping too far forward), then threaded heddles by standing, putting through heddle and then tying individual ends onto the rod at the warp beam as it hangs over the top beam.  Once the ends are all sleyed, threaded, tied on, I rehook the beater bracket and then wind on, packing the warp beam with either sticks or paper.  

Happy, happy weaving to you with the loom!  Please show us what you're up to with it!!

Tommye

P.S.  By the way, I weave by building shapes rather than moving selvedge to selvedge so I don't use the beater.  I used to use it when I was doing another method where I worked across the width each time (double weft interlock)... but for years now I've built shapes and so the level of the beater was too low for me in its normal position.  To solve that, I pushed it up to its highest point and use C-clamps at each side to hold it there.

theresasc

for all of the comments.

Tommye, this loom is sort of your fault:-)  I have read about and seen pictures of your tapesty diaries and have seen what others are doing and decided that I want to play too! 

I have been playing around with tapestries on and off since I started weaving.  I have a couple of pipe looms and floor looms that I have tried weaving tapestry on.  I found the pipe looms to be clutzy to work and I did not like weaving horizontally for tapestry on the floor looms.  I am hoping this Tissart will work out better.

Right now I am just working on techniques, kind of working through Nancy Harvey's book and Cathe Todd-Hooker's "Line in Tapestry" before I try to tackle some of the ideas that are floating around in my minds eye.

Theresa

MK Custom

My Tissart is the favorite of my various looms.  I warp from bottom to top and find it much easier than bending over a floor loom.  I've used it primarily for light-weight saddle blankets and rugs, and find the weight and downward motion of the beater creates a tightly-packed final product.  But maybe now I'll actually use it to create a tapestry...

Hope you have fun with your new loom!

 

 

creaturecomforts

Hi  Theresa sc I was wondering if you might happen to know the dimensions and even the weight of the 45" loom.  I have found one for myself and looking to getting it shipped.  The lady is not very well so hate to bother her .   Trying to no avail to find this info so hoping you might know.  

How are you liking it?  What are you weaving on it? 

I am hoping to make some raw wool and handspun, as well as  lockspun mohair rugs (and llama and wool too). 

THanks 

Dianne  

theresasc

It is taller than I am, and I am 5'5".  Assembled, I would say it is close to 6'.  It is alot heavier than you would think.  I took the cloth beam off, and had one heck of a time pulling it up the stairs.  I had looked at shipping it at one time, and the shipping was way more than the loom cost.

It is a lovely loom to weave on, holds great tension, good shed, and easy to sit at and weave.  I have woven small wool wall hangings and when I domsit at the loom, it is enjoyable.

 

theresasc

It is taller than I am, and I am 5'5".  Assembled, I would say it is close to 6'.  It is alot heavier than you would think.  I took the cloth beam off, and had one heck of a time pulling it up the stairs.  I had looked at shipping it at one time, and the shipping was way more than the loom cost.

It is a lovely loom to weave on, holds great tension, good shed, and easy to sit at and weave.  I have woven small wool wall hangings and when I domsit at the loom, it is enjoyable.

 

Submitted by theresasc on