About 5 years ago, we acquired a disassembled 50's era loom as a lark.  I got Debbie Chandler's book,made a lot of mistakes, but eventually became accomplished (I felt) in weaving basics -- scarves, table runners, a few rag rugs . All in wool, or wool blend yarns. 

This summer, my husband found a wolf pup LT and got it for me and I was so excited! Towels! Linens! But I am getting nowhere. A friend who weaves on a huge LeClerc gave me some cotton threads. I can't so much as get it off the warping board without a mess. I finally accomplished that, only to discover I mis-measured the ends. I fixed that, and everything tangled when I sleyed. I cut it out, determined to keep trying, and continued to have problems threading the heddles. 

But the questions: I want to make something the entrie width (18") of the loom. With a 12 dent reed, if I sley 2 ends per dent, that's 440 ends; the loom only has 280 heddles....So I add more? 

I've read a lot on here about the numbers on the spools, but I still can't tell how to use those to figure out epi. I resorted to winding the thread around a ruler...

How do I keep fine threads ordered? Getting them off the warping board, perfectly ordered even with choke ties, seems impossible. Chaining it made it worse. And I had to use lease sticks for the first time, and that seemed to make things a million times worse. I warp front to back, so I followed Debbie's directions and tied the sticks to the front beam. cut the ends, and then couldn't tell what was "next" to sley. And when I pulled a thread off, it dragged all the rest and became a mess. 

Any baby steps to suggest a path to success are much appreciated. I really don't get lease sticks at all! (all my other projects, regardless of size, I sleyed all at once, it's easy woth wool) Clearly, working with cottolin, linen or cotton is quite different than wools and wool blends. Or is it? 

Comments

laurafry

So very discouraging.  I suggest you sign up for Janet Dawson's floor loom weaving class on Craftsy.  It will get easier!   Having a teacher with suggestions on how to make it so, will help. 

Cheers

laura

 

 

Ryebaby

No, I didn't forget the cross -- it was all tied, and on the lease sticks still tied, until I started to sley. I tried to spread the warp across the sticks, to help discern what was next, but it was just so tangled beyond the sticks. The threads stuck to my hand, too, which wasn't helping. I felt like tweezers were in order

Sue in VT

  If you are having trouble with the process, why not make it a simpler task.  If you have 400 threads, you can warp only 100, and then make your choke ties, and take the cross to your loom.  Sometimes I do that, and I always carry my cross to the loom in my hand.  Chandler explains lease sticks, but also how to just use your hands.  I'm pretty new, too, and that's what has worked best for me.  REREAD the part of her text where she explains how to determine which thread is next.  If a thread pulls other threads, IT'S NOT THE NEXT THREAD!  Sometimes it takes frustration to come to a new place in your growth!  Good luck!

sandra.eberhar…

The best way to avoid tangles is to keep al the threads under tension at all times.  Working with a valet or a trapeze helps a lot.  There are a lot of different methods to warp a loom, but rolling the warp onto the warp beam under tension and then threading and sleying (back to front) is often the easiest and most adaptable method, especially for fine yarns.

sandra.eberhar…

You mentioned that all of the weaving that you have done so far is in wool.  Cotton requires more carefull tensioning when winding and handling the warp; it's not elastic and will stretch if yanked.

Joyce (not verified)

I signed up for Janet Dawson's class and it has helped me in all areas of the weaving process.  I am finishing up some waffle weave towels I had on my loom when I started the class.  Well worth it and you can go back for review over and over again.

CelticCats

I downloaded from Interweave's Store Laura Fry's "The Efficient Weaver".  This is an excellent video and I have watched it over and over.  There are many very helpful techniques.

 

Also, as a new weaver, I like warping back to front and as others have suggested, make sure you put lots of tension on your warp as you wind it onto the back beam.  Vavstuga's CD on "Warping the Swedish Way" is an awesome video on how to wind your warp and dress your loom.

 

Both of these videos are highly recommended, especially if you are a visual learner.

 

Wishing you the best of luck in your endeavors.

 

Dorn =^.^=

 

 

Erica J

Please don't forget we have excellent classes here on Weavolution, including Daryl Lancaster's warping Front to Back.

Http://weavolution.com/classes

Submitted by Ryebaby on