Just throwing this out for input....Will a linen warp (40/2) and a cotton weft (20/2) be feasible for toweling  (huck a back).....Like to know what anyone thinks....Thanks, Judy

Comments

lkautio (not verified)

Yes, this will work fine.  Usually it is done with a linen weft and a cotton warp to lower costs and because cotton is easier for a warp if you are not used to linen.

Laurie Autio

laurafry

Cotton and linen together make nice towels.  Right now I've got a 20/2 merc. cotton on the loom, weaving the towels with a singles 12 linen.  Pics on my project page.  More info on my blog http://laurasloom.blogspot.com

cheers,

Laura

jlread (not verified)

Yes...linen can be tricky for a warp....I've done linen/linen (20/2)...but would like to try the linen warp with a cotton weft...Just curious about the sizing since the warp (40/2) and weft (20/2)will be different fibers...I'm trying to keep the weaving as balanced as possible....JR

lkautio (not verified)

40/2 linen and 20/2 cotton are a good match in size, with similar setts.

Laurie Autio

jlread (not verified)

Thanks Laurie....exactly what I needed to know

jordanj (not verified)

Can anyone tell me what a good size of linen would be for weft with a 8/2 cotton warp (twill blocks @ 24 epi)?

Thanks!

Jennifer

Joanne Hall

16/2 linen comes in many colors and is very nice to work with.  The finer singles usually do not come in colors.  You can also choose 6/1 tow linen and it comes in colors.  I have used that with a 16/2 linen warp and they are similar in size.

You can see the colors on the Bockens linen website

http://www.holma.se/

or here:

http://glimakrausa.com/yarns-16-2-linen.html

Joanne

dawnmccarthy (not verified)

I wish linen yarn was easier to obtain in larger cone sizes!  That can be said for other yarns also. It seems that mills have been in decline and I have to search for finer yarn sizes in bulk and european linen is quite expensive and only available on smaller cones!  

Dawn

 

Joanne Hall

Hi Dawn,

One of the reasons for this is that linen is usually wound with two, three or four tubes together, to give you a 2/2, 3/3 or 4/4 lease.  It beams on much easier this way.  If you purchase 4  1/2 lb tubes (8.8oz), you will have 2 1/4 lbs of linen.  And the fine threads have a lot of yardage and so they go a long ways.  Bockens will send it on larger cones, but you need to order over 100 kilos.

Joanne

dawnmccarthy (not verified)

Joanne, that totally makes sense - especially for damask warps!  It is nice though  (with other yarns) to get that nice discount on the large cones when possible!  Then again, you get what you pay for and linen has such a nice hand!  BTW I just wound off 3 cones of 16/2 from a 3lb cone to get 3 warp threads in winding for the 6 shaft damask warp. I am lucky enough to have an electric cone winder.

Dawn (currently using 16/2 cotton warp and 16/1 linen weft)

susanjeanne (not verified)

I'm adapting a mosquito lace curtain project from the Big Book of Weaving and while I plan on sticking with the 20/2 cotton suggested for warp, I'd like to use linen for the weft. Would I need 40/2 linen for a balanced weave? Would a 20 singles work? Also, the pattern calls for 8/4 cotton at intervals. Would 8/2 doubled work as a substitute. (Obviously, I haven't been at this for too long!)

ReedGuy

Joanne and Sara and many other experienced weavers, I have a Q. Does linen have a shean to it? I have a draft where I would like the warp to be linen because the "petals" are from warp effect. Would 16/2 linen and cotton work well together? I am looking for the petals to stand out with some shean or luster. The petals resemble aster petals, if you have looked close at asters.

My own draft called --> Goldenrod

jlread (not verified)

Linen does have a sheen...and after wet finishing...a good press really brings it out!...Just checked out your draft...nice..!

ReedGuy

Thanks, I may modify it further for more petals between the rosettes.

Sara von Tresckow

Linen only has a good sheen if it is a single. Plied linen will remain somewhat dull, even after wet finishing and mangling. It is the hard press or mangle that flattens the singles to reflect light that gives fine linens their beauty. Using a plied cotton as warp doesn't harm your effect, though mercerized will have a bit of sheen with it - the rule of thumb with cotton and linen combinations is that the that the first number of the cotton - say a 10 of the 10/2 nearly matches the number of the linen single (10 - or 8 0r 12) - for 16/2 cotton, use a 16/1 linen, etc.

Submitted by Anonymous (not verified) on