Hi everyone, I am very new to this forum and to weaving and could do with some advice please. I am thrilled to have found this site for now I know that I can using knitting yarns for weaving but I have also been advised that I can't use weaving yarns for knitting! (knitting machine or hand knit). Hubby and I breed rare breed sheep and alpacas and have recently sent fleeces from both types of animal to the Mill for making up into yarn. (whilst I do hand spin this was 50kg of fleece!) I am confused though as to what ply I should be asking for - this is being made up into knitting yarn. I want to weave scarves, shawls, stoles (that type of thing) which would be lightweight rather than thick, so can someone advise me what ply I should be ordering and whether it will be suitable for both weft and warp. As an aside, I have also been offered a Glimakra countermarch with bench floor loom, which I am assuming will take any ply?

Comments

ReedGuy

Singles for scarves and light blankets (16 epi) and double for throws and heavy blankets (8 epi). The mill here uses single ply for their blankets (16 epi) twill. They don't weave them, they are done in western Canada. The mill is here in the Maritimes (NB). Referring to sheep wool.

Please wait for more input from others on this before deciding. :)

Joanne Hall

Single ply yarn is very versatile.  But, can you get a sample from them?  If their single ply yarn is a very twisty yarn, then ask for the finest two ply that they make.   And if you need a thicker yarn, you can always use two together for either warp or weft. 

Joanne

Sara von Tresckow

You really need to do some looking at commercial yarns in a good retail store - comparing running length, amount of twist, number of plies, elasticity, etc.

Of course you can knit with weaving yarn and weave with knitting yarn - but not in all cases. Experience will show you what you like to work with.

Ask this mill for samples of the yarn that they usually produce. This will be best for your first  batch - you haven't had enough exposure to do "custom designing". Ask the mill what other customers do with their yarns.

There is no recipe for things like this - every poster will have different fabrics in mind - and ultimately you are the judge of what you'd like in finished product.

Warp yarns do not necessarily need to be as tough and twisty as, say, the Navajo single warp which withstands unbelievable stress without breaking. Something as tender as the silk/wool Zephyr works on the drawloom with each warp being acted upon by TWO heddles at the same time. For clothing fabrics, scarves, blankets etc. most well-spun wool works as both warp and weft.

By "ply" I assume you are using the mill term for the grist of the yarn you want. You can weave and knit with singles, or 2-ply yarn. 3-plies are great for knitting but can stiffen the hand of woven fabric.

To determing sett for weaving yarn, do a wrap test and refer to a table for calculating for plain weave and twill.

If these are your animals, they will have fiber again next year - try something that sounds good and change your order next time if you do not like it.

mrdubyah (not verified)

Sara is telling you all the right things.  Twist, grist, and ply can all be varied to make the yarn you want for your project.  Worsteds are yarns made of tightly twisted parallel fibers. They tend to be heavy for their size and have a relatively smooth hard finish.  Men's suits are made of worsted yarn.  Woolens are yarns made of lightly twisted spiraled fibers.  They tend to be fluffy and lighter weight for their size and have a fuzzier finish.  Fisherman knit sweaters are made of woolen yarn.  Both types can be made from the same wool.

Semi-worsted is anything in between worsted and woolen (such as lightly twisted parallel fibers or tightly twisted spiraled fibers).  The more twist, the harder and denser the yarn.  Grist includes both the size of the yarn (its diameter) and the weight of the yarn (how much fiber twisted how hard), and is usually expressed in yards per pound.  Note that two yarns of the same diameter can have very different weights, and therefore very different grist.  Hope this helps!

loomroomcat (not verified)

I do quite alot of weaving blankets and ruanas with millspun yarns.  I like sport weight 2 ply for warp.  It can also be used for weft for a nice blanket or worsted for a heavier warm blanket.  I have the mill leave it on cones for weaving, it is unwashed and fluffs quite a bit when the finished fabric is washed (fulled).

Claudia Segal (not verified)

As for the Glimakra countermarch loom, I suggest you try it out first if you can.  I switched from jack looms to the Glimakra countermarch and I love it.  In fact, I now own two, a Glimakra Standard and a Julia.  It's a great loom but a bit more work.  You can do everything from rugs to silk scarves and shawls.

Claudia

PS Welcome to Weavolution.  So glad you found us!

Splinter

Thank you all so much for your very informative and helpful comments.  I finally did some swatches with 'weaving' yarn using knitting machine and hand knitting and they turned out fine.  I took my 'weaving' yarn to the Mill and said I wanted my fleeces/fibre made up as weaving yarn so that i would have the best of all worlds: weaving, hand knitting, machine knitting and crochet.  He tutted and said 'you can't use weaving yarn for anything but weaving'  I told him of my swatches and he produced a half made jumper that had been knitted from weaving yarn, it was totally distorted and all the stitches went diagonally.  So I went back to the drawing board and ordered the rare sheep wool in 4ply and the alpaca in 2 ply knitting wool with the assurance that I can use it for weaving!  But the Glimakra is installed and I am just waiting for the reeds now.  Any advice on what pattern books to buy and how to warp the loom.  Thanks once again.

KarenIsenhower

Three books I would not do without: Learning to Warp Your Loom by Joanne Hall, Tying Up the Countermarch Loom by Joanne Hall, and Big Book of Weaving by Laila Lundell. As a novice (9 months) weaver with a Glimakra Standard, these books have been invaluable.

I have been using the Big Book of Weaving to learn the basics, following each of the projects in order. It's a well-thought-out curriculum.

mrdubyah (not verified)

I don't know how that mill processes its yarn, but that sounds like a load of hooey to me.  I'd be more likely to attribute the jumper to crappy knitting or bad finishing.  Generally, the difference between weaving yarn and knitting yarn is that one is on cones while the other is in balls and skeins.  Both are made of the same twisted fibers in the same variety of sizes and styles.  Singles, 2, 3 and 4 ply yarns behave differently, but any of them can be used for either weaving or knitting.  I routinely weave with "knitting" yarns and my wife routinely knits with "weaving" yarns.  We've never had any such problem. 

ReedGuy

I'm no expert on weaving, but I suspect someone at that mill is pulling a fast one. The mill here sells yarn and the primary customer are knitters. However the same yarn is used in blanket weaving, kilts, scarves and who knows what all. The mill sells blankets made with their yarns. I suspect someone wants to sell something. ;)

loomroomcat (not verified)

I know I knitted a sweater when I was a beginning spinner and had not set the twist on the yarn before knitting.  That piece skewed terribly.  Maybe the guy at the mill had used the yarn before the steaming they do to set the twist.

Sara von Tresckow

Beginning spinners spin yarn that skews all on its own - "setting" twist or steaming will only cosmetically alter the yarn. If you had "set" your yarn, the skewing would have shown up anyway after wet finishing.

Believe it or not, you CAN spin singles of the proper fleece type and have them behave well - once did a beautiful Aran out of hand combed fleece. However, overtwisted yarn skews whether its been "set" or not.

The guy at the mill doesn't know what he's talking about. If the knitted garment skewed, he's spinning his yarn incorrectly. If you have other mills in your area, or even at a reasonable distance, in the future you should go to each one and have the same discussion.

ReedGuy

I was also wondering if direction of twist has an impact if the yarn is used on a knitting machine or serger. Say you use a serger for an overlock stitch on the ends of blankets? I have read that machines require the twist to be in certain direction, which I believe is left twist.

mrdubyah (not verified)

Most commercial yarns are spun clockwise (right handed), producing Z-twist.  Z-twist is great for right-handed knitting and left-handed twills.  Counterclockwise (left handed) twist is called S twist.  S twist is good for left-handed knitting and right-handed twills.  Either yarn can be used to make either twill, but opposing the direction of the yarn and the direction of the twill produces a softer finished fabric than if the directions match.  Yes, unbalanced or "energized" yarns (single or ply) will add bias to fabrics.  That doesn't make them bad.  Sometimes, this is a good thing!  You can alternate the direction of twist (e.g. 20 S spun then 20 Z spun threads etc.) in a warp or weft to make the fabric pucker.  Do it in both warp and weft to make puckered squares.  FUN!

kerstinfroberg

While I agree with Sara ("it is possible to spin singles ... and have them behave well"), singles will *always* have an, hm, "unbalanced" twist. As plying normally is done in the other direction, the 2-ply can easily be "balanced". Many commercial weaving yarns are 2-ply. Most commercial 2-ply yarns are balanced.

Splinter

The story continues:-  I obtained lots of cones of weaving yarns from different suppliers and knitted swatches which turned out fine.  I took them all to my local mill with great glee.  He looked at each cone and said 'its knitting yarn' and explained that most 'weaving yarn' is actually knitting yarn. I saw on his display of coned wool, one exactly the same as a sample I had brought and so asked if I could see that particular weaving yarn.  As I approached I saw the sign saying 'knitting yarn'.  I asked if I could buy some 'weaving yarn' and he said no problem and pointed to the display of knitting yarns I was already looking at. He explained that he bought 'mill ends' for knitters and weavers alike.  He further explained that commercially produced weaving yarn such as he produces has a much tighter twist and is therefore not as soft or fluffy as hand knitting yarn.  I then spoke to other Mills and suppliers and it would seem that it all depends on the Mill.  Only one mill said I couldn't use their weaving yarn for knitting because of the additional twist.  All the others were more open and said that they sell knitting yarn as weaving yarn.  So I think we now have the answer - it depends on the Mill!  But undeterred I have spent all day, practising my weaving (with knitting yarn that I was sold as weaving yarn!) - you do have to see the sunny side of it.  My thanks to all of you for your very welcomed comments and advices.

Submitted by Splinter on