Hi all

I've become intrigued by jack looms, probably because I've never seen one or tried to weave on one. When I googled it a bit, I found mostly articles stating how bad the jack looms are for weaving. I know there must be advantages, since so many people seem to have them. So, any jack loom weavers here: why do you like it? Which one do you have? I think they all look very nice, but looks aren't everything, right?

And are there any particularly good sites on the net where I can read about jack looms?

Thanks to anyone who will enlighten me

Tina/Manicgirl

Comments

TinaHilton (not verified)

I like jack looms just fine for most things.  Countermarche or counterbalance keeps the tension even on the top and bottom warps in the shed, but I've never had a problem with the shed on jack looms.  If you need a high tension, some jack looms have a problem with the shafts floating but it's fine in normal weaving.  The tieups are easier, I think, than countermarche.  And uneven weaves (like 1/3 twill) are easier than on counterbalance.   I have a countermarche, had a counterbalance, and have owned 4 jack looms (sold 2 but still have 2).  Sorry, but I don't have any links to refer you to.


kerstinfroberg

I don't understand why unbalanced weaves are considered difficult on a counterbalance loom. In fact, I had been weaving for nearly 20 years before I had ever heard that it could be a problem...  4-shaft counterbalanced looms are pretty much "the standard loom model" in Sweden, and 1/3 broken twill is pretty much the "standard upholstery fabric" (cotton warp, linen and wool weft). It is usually woven reverse side up (warp face up) - usually on counterbalanced looms. I have seen miles of such fabric being woven without problems.

Then I joined a weaving list on the 'net - and some years later I visited the US. That was the first time I got to see a counterbalanced loom ithe rolles instead of horses - and then I understood... It was also the first time I got to see (and try) a jack loom. At first I thought I was doing something wrong - surely it should not be *that* hard to treadle? Was there perhaps some locking pin I had not obseved? It turned out that no, no locking pin - it *was* that hard to open the sheds.

Of course, if you don't want a countermarche, a jack loom can be a good idea for more than 4 shafts. Balancing the upper tie-up for a (say) 8 shaft figured cord on a counterbalance loom can be a real challenge...  Below is a picture of several counterbalancing devices. The upper right one is a "drälltrissa" for up to 10 shafts - typically used for 2-block turned satin or twill structures - typically used without horses.

The bottom left one can be used for up to 8 shafts (used with horses - the two middle thingies in the right column). (The picture comes from http://www.vavstolar.se)

Here is a description of the difference between the two loom types (scroll down a bit for the pictures).

Manicgirl (not verified)

Thank you, both Tina and Kerstin. I'll read the info on the link you sent Kerstin, and being Swedish, I have the same experience as you. I have a counterbalance and a countermarche loom, and I like them both, but I'm still curious about jack looms. If ever I come across a jack loom, I'll be sure to try it out.

Too bad they're impossible to find here, as far as I've seen.

Tina /Manicgirl

laurafry

Or you could visit Kerstin and try out her AVL which is a rising shed loom.  :)

Cheers,

Laura

Manicgirl (not verified)

Hahaha, yes, wouldn't THAT be wonderful! :-D

Tina

Sara von Tresckow

It's doable - we live in Wisconsin and found her last Spring. Nice studio and well worth a visit!

laurafry

I'm not sure where in Sweden you're located, but Sweden isn't that big a country..... ? :)  (Compared to Canada, anyway)  :^)

Cheers,

Laura

Sara von Tresckow

 Not as big as Canada or the US, but we certainly misjudged how spacious Sweden really is. We drove and drove and drove and saw a lot of forests and pine trees between stops.

Submitted by Anonymous (not verified) on