I decided to wind a short warp, 1.5 yards, to try double weave using sock yarn and to test a new pattern I received in a kit.  The lease sticks dropped out and I lost my cross before I could thread the loom.  I had already cut the ends in anticipation of beginning threading.  So, I have one lease stick still in and when I try to thread in order it's not working.  Should I take the warp off the loom and rewind each, now individual, thread on warping pegs to reinsert my cross?  I don't know what else to do because when I grab an end to thread it, it sometimes pulls the opposing end out of order and off the back apron rod.  I'll try to take pictures tomorrow.

To rewind or not to rewind, that's the question.

Thanks,

Claudia

PS-I have to decide and weave quickly, I have several holiday gifts to complete.  I had to stop working on this 5 weeks ago when I cracked 2 ribs and could no longer warp or weave.

Comments

ReedGuy

You probably didn't tie the ends of the sticks with string once the cross is on the pair of warp sticks. They would not have slipped off then. ;) I never remove the ties that hold the lease until I have the ends all on the lease sticks and the ends of the sticks tied. I think you'll either have a mess of knots or be awhile sorting it out. It may not be a total loss on a small warp, so be patient I guess.

We all get in a hurry or get anxious to weave and make a slip. ;)

ReedGuy

Claudia, since you bring up doubleweave as part of the project I was meaning to ask a Q. Have you heard of anyone weaving a tube to make, say wool hats. And sew one end closed? I was going to try it with wool and felt it so it blocks the wind. Just an experimental idea I have.

endorph

that sounds like a great idea - don't know why it wouldn't work - I have knitted tubes and tied together one end to make a hat - same principle with the double weave. Tina

Bonnie Inouye (not verified)

There are several articles in print for using double weave to make bags and purses. Usually this style of hat needs to have some stretch but you could weave a tube and then knit a band onto the bottom edge. Or you could weave a textured fabric with some elasticity and make it a tube if you have enough shafts.

ReedGuy

Now that sounds like a good way to do it Bonnie. Or you could back weave it before felting. I would think the wool would still be elastic enough to stretch some. It would have to be a bit oversized before the felting and you would not want it tight on the noggen. :)

loomyladi (not verified)

Claudia just tough it out, you will put in way too much time on 1.5 yards BUT you won't waste it.  An elderly weaving friend is a "child of the depression" and often times that means I put on under 2 yard warps and since she is often using leftover warp pieces from other projects, that she stretches out on the floor to cut, there are no crosses.  It is time consuming and can be tedious.  Not the way I like to warp, but put on some good music and thread, then do the unthinkinable, take out all the warp ties and "comb" it out in some fashion with fingers etc.  Extreme frugality is the mother of necessity.  

I just finished a 2 yard warp, 300 ends, where every two threads change color (a total of colors).  She ended up with 6 warp chains, with 3 different color order combinations.  While I was able to keep my cross I still had to do major manipulation to thread correctly, which left a tangled mess.  Once it was all threaded it only took me about 30 minutes to "comb out" the cross overs and potential tangles.  

The greater challenge was that I did not count heddles (duhhh!) and because the project was full width in a 20" Structo I ended up with too many heddles on each harness that had to come off after it was warped and they compromised the project.  Grrrrrr.......  Fortunately my loom guy was visiting (yeah for Bruce) and he had the aggrevation of taking off the heddles.  Removing the extra heddles took almost 2 hours because of the space constriction.

Yes, I should have taken photos, so many things on this project that should not have been done.  In the end, it is a beautiful warp and will make a lovely mat.

Lessons learned from this project........ always write down the color order for my friend when she is going to wind multiple chains (ok so I just have to accept whatever chains she gives me and work with it, she knows to write out the colors) .......... ALWAYS count the heddles (yes, I knew this, but.......)  

Warping time (not counting the winding of the warp) for a 2 yard, 300 end multi-colored mat......... waaaayyyyy tooooo looooonnnngggggg.  But it is pretty!

sally orgren

Can you put low tack tape on the remaining lease stick to keep things in general order?

sally orgren

Claudia, I had a similar problem earlier this year. Lots of good advice. Search "lost the cross"to review. Good luck!

MaryMartha

As for low tack tape, Scotch brand blue masking tape from the hardware store has gotten me through several bouts of partially lost crosses.  I'm a clutz who warps alone. 

I think it may have a teflon coating.  Freezer tape or white masking tape does not work nearly as well.  Really worth the extra money. I keep a roll by the loom.

mneligh

If you can warp from both directions leave the warp where it is and put on another short warp on from the other direction.  Don't beam the 2nd warp -- just tie it on (keeping any color changes in the 2nd warp in the correct sequence) and then weight it and beam the whole thing.  To get the tension perfect I'd try to make sure you get everything through the reed, even if you have to intially beam it onto the front, retie, and roll it back.

The one trick I foresee is if you thread from the opposite side of the loom, it reverses your threading sequence.  If you're using a diagram, turn it upside down.

You can also use the thread trick.  I use masking tape on every section of my sectional beam as it comes off the tension box reed.  It's easier with short sections of tape than long ones.

Claudia Segal (not verified)

Hey Reed Guy,

So many options to consider and a new wrinkle.  I was feeling much better after falling and cracking 2 ribs 5 weeks ago.  I was out walking this morning and fell again.  I believe I have now cracked 2 more ribs on the other side of my ribcage.  I heard them crack as I hit the sidewalk this morning.  I am here but just barely.  I am in agony and there will be no weaving until the new year.

Thanks everyone.

BTW, to weave the caps, I would use elastic thread for the weft or alternate it with regular weft.  I was working on a pattern from Yarn Barn of Kansas which uses sock yarn for the warp and elastic yarn for the weft to make tubes for hand mitts.  There is a specialy treatment for the thumb hole but it is basically a tube.  Should work well for the hats, too.

I'll be reading along on Weavo.

ReedGuy

That's too bad you had another fall. Are you walking on loose gravel?

Take care of yourself and keep reading. :)

mneligh

Thirty or so years ago I went to a workshop on Rochester MN on loom-shaped garments.  Two techniques I recall might apply here.

One method of making a flared skirt was to weave all the areas  and only the areas that are part of the pattern -- that is, don't fill in the darts, and don't weave the fabric outside the pattern.  If you consider the beret-like hat like a big hexagon that is continuous around the widest part, you could do this on a double weave tube.  Cut a pattern first so you know where to leave it unwoven.

A second technique was maybe more applicable.  The presenter of that session wove the skirt with wool that shrinks a lot at the top, and little at the bottom -- like merino grading through the weights to Lincoln, or some such.  Then she felted (shrank) the top a lot more than the bottom -- and it worked!

sally orgren

So sorry to hear this news! I will be thinking of you. I have been traveling for several weeks now, so like you, only weaving vicariously. If travels bring me to your corner of the world, I will certainly give you a call! Lay low, and heal up.

Artistry

Very sorry to hear that your fell and have broken ribs, as if once wasn't bad enough! I hope that you can rest and heal as quickly as possible! Take care.

Del (not verified)

Handwoven Magagzine had a version of this sometime in the past yr. or 2. Will try to rmember to check my library for you.

Submitted by Anonymous (not verified) on